111/EDCB/2023-24

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-II Bareilly Approx. distance upto 60 Km. Including safe loading and unloading.

ST Pole 11 Mtr

PCC Pole 8.5 Mtr

ACSR Weasal

ACSR Rabbit

AB Cable 3x120 sqmm

33 KV Fuse Set

33 KV Line Isolator 800 Amp.

33 KV Bus Isolator 800 Amp

33 KV CT 400/200/1-1-1 Amp

33 KV CT 200/1-1-1 Amp

33 KV PT 33KV/110V

Other Line material

Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

ST Pole 11 Mtr long (Single)

PCC Pole 8.5 Mtr (Single)

Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

ST Pole 11 Mtr long (Single)

PCC Pole 8.5 Mtr (Single)

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Dismentaling of Old/Jarjar wire as per norm complete in all respect

Laying, Stringing & Sagging of Following Conductor complete in all respect

ACSR Weasal Conductor

ACSR Rabbit Conductor

AB Cable 3x120 Sq mm

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Fixing of 3 Phase Distribution Box

Installation of 33 KV Fuse Set as per norms complete in all respect

Installation of 33 KV Line Isolator 800 Amp. as per norms complete in all respect

Installation of 33 KV Bus Isolator 800 Amp as per norms complete in all respect

Installation of 33 KV CT 400/200/1-1-1 Amp as per norms complete in all respect

Installation of 33 KV CT 200/1-1-1 Amp as per norms complete in all respect

Installation of 33 KV PT 33KV/110V as per norms complete in all respect

Installation of 33 KV LA as per norms complete in all respect

Pipe Earthing of Transformer (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE)

Gaurding at Road Crossing Complete in all respect

Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost)

Stone Pad 300x300x75 mm

Holding Clamp for T Off, Cross Arm and Expouser Pole

F Clamp with Nut & Bolt

X-Arm Holding Clamp

Danger Board

Barbed Wire

Aluminium Lug

PG Clamp

Stay Clamp

Stay Insulator

Earthwire Clamp

WTI For Power T/F

OTI For Power T/F

Breather With Oil For Power TF

Gauarding Angle Clamp

Eye Bolt For Guard wire

Nut Bolt with washer

Piercing Connector

Safe back carriage of Following item (if any) from work site to C.B. Ganj store Bareilly approx distance upto 10-80 Km including loading & unloading.

Scrap

M/S MEGHA ENTERPRISES