PROVISION OF BR WORKS TO BOUNDARY WALL AT BHERAI LAND PIPAVAV, DISPLAY BOARD IN ADMIN BLDG PIPAVAV, OTHER MINOR WORKS AT OTM COMPLEX OF ICGS PIPAVAV AND CERTAIN WORKS OF PERIMETER SECURITY WALL OF CGDHQ-1 UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth and getting out Soft/ Loose soil complete all as specified and directed.

Returning filling in incl spreading levelling watering and well Ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified.

M&L for Dismatling of PCC street light pole any size including fitting and fixtures and pole box,cables and remove from site and make good disturbed area and all as specified and directed.

Supply and fix octagonal hot-dip galvanized street light poles including junction box, height 7 mtrs, top dia 70mm,bottom dia 130 mm, sheet thickness 3 mm, base plate 220x220x12,foundation nut bolts as per manufacturer recommendation including reinforced cement concrete foundation and hot dip galvanised bracket DOUBLE arm for fixing of 2 Nos street light including one no of MCB 6 amp with MCB terminal block all as spd and directed. NOTE :1. The contractor should submit manufacturer's foundation drawing before commencement of foundation work. Synthetic enamel paint for above ground level, Excavation/earthwork,foundation etc incl removal and returning filling included in the quoted rate. 2. Applying Single coat of Aluminium paint including numbering of pole in the quoted rate. MAKE: BAJAJ/UTKARSH/SURYA.

M&L for Multi standard Copper Conductor cable of size 1.5 Sq mm 3 Core, drawn through inside pole, for interconnection from Terminal block/MCB to Street Light fitting complete all as specified directed. Make :- Polycab/Plaza/Havells/RR Kabel

Supply and laying of XLPE insulated and PVC armoured heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 10 Sqmm 4 Core laid in trenches/along the wall/pole including making good the disturbed surfaces of walls/floor etc all connections complete as required at site and as directed. Make : Polycab/Havells/RR Kabel/Plaza

Supply and laying of XLPE insulated and PVC armoured heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 16 Sqmm 4 Core laid in trenches/along the wall/pole including making good the disturbed surfaces of walls/floor etc all connections complete as required at site and as directed. Make : Polycab/Havells/RR Kabel/Plaza

Supply and laying of XLPE insulated and PVC armoured heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 35 Sqmm 3.5 Core laid in trenches/along the wall/pole including making good the disturbed surfaces of walls/floor etc all connections complete as required at site and as directed. Make : Polycab/Havells/RR Kabel/Plaza

Supply and laying of XLPE insulated and PVC armoured heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 25 Sqmm 3.5 Core laid in trenches/along the wall/pole including making good the disturbed surfaces of walls/floor etc all connections complete as required at site and as directed. Make : Polycab/Havells/RR Kabel/Plaza

Supply and lay 50 /38 mm Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables, laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge. Make: Rex/Poly/Gemini

S&F automatic street light switch NATURE SWITCH for automatic switching of streets lights based on lux level of natural light. The sensor (nature switch) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compound conforming to IP-54. The contactor, MCB and circuit wiring 16 sqmm copper shall be suitable complete all as specified and directed by Engineer-in-Charge. Make :- Model No. SWADEEP-02EC-5kW3P (3 PHASE) of Healer or equivalent to LEGRAND /L&T

M&L for cutting existing road/hard standing not exc 45 x 45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil complete all as specified and directed.

S & F in replacement of GI steel tubing light grade 40 mm dia for laying in ground and road crossing along the pole in coping etc for cable protection including necessary fittings, clamps for supports, etc and all as specified and directed. Make - Tata/Jindal/Surya Prakash

M&L for Cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in coping of poles, complete all as specified and directed.

S&F LED street light fitting 60 Watts (5700K), IP 66, with aesthetic aluminium powder coated housing and precise street optic lenses with nuts & bolts etc complete all as specified and directed. Make : Wipro cat No. LR08-781-XXX-57-XX or its equivalent in Philips/CG

Supply and fixing post top lantern LED type 60 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Wipro Cat No. (LP09S-671-XX-57-XX) or equivalent in Philips

S&F LED Decorative Street Light for garden 60 Watts (5700K), IP 66, high performance LED streetlight, with compact and aesthetic aluminium powder coated housing with fresnel diffuser, nuts & bolts etc complete all as specified and directed. Make : Crompton cat No. LPTE-60-CDL or its equivalent in Philips/wipro

Supply Installation and Testing of all in one integrated solar street lights, 40W, compact, extruded aluminium construction with high efficiency silicon photovoltic panel, High efficiency LED not lerss than 4000K having secondary lense optics for street lightining distribution, High performance lithium battery, MPPT charge controller and intelegent control module/sensor with higher releability, long service life and all as spd and directed. Make : Wipro (LR19-751-xxx-57-xx) or equivalent in Philips.

S&F Pole box with 6 Amps MCB provision and suitable connector for single hose connections loop in and out 10 to 16 Sqmm 4 core aluminium armoured cable branch out 1.5 Sqmm single core copper PVC insulated cable enclosed in a thermoplastic polycarbonate enclosure which should be shock proof safe IP 66/67 weather proof, rust proof, dust proof, water proof, internally embedded gasket with provision for cable entry through IP 66/67 thermoplastic metric size glands and/or grommets enclosure size (155 x 210 x 92mm ), fixing arrangement and clamps including making connections all as specified and directed. (Cat Part No KF 1616 G of Make : Hensel or equivalent model of Sintex)

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion

Excavation in post holes (or similar holes) n. exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm, watering and securg surplus soil all as specified.

M & L cement concrete (1:3:6) type B-1 using 20mm graded stone aggt as in foundaton, filling, mass concrete and sub floors etc. complete all as specified.

S & Fixed stainless steel tube of 50mm dia (Grade-316), of minimum wall thickness of 1.5 mm, including SS welding, jointing complete all as specified and directed by Engr-in-Charge.

S & Fixed stainless steel tube of 40mm dia (Grade-316) of minimum wall thickness of 1.5 mm, including SS welding, jointing complete all as specified and directed by Engr-in-Charge.

S & Fixed stainless steel tube of 25mm dia (Grade-316) of minimum wall thickness of 1.5 mm, including SS welding, jointing complete all as specified and directed by Engr-in-Charge.

S & Fixed stainless steel section of 15mm x 6 mm (Grade-316) including welding, jointing complete all as specified and directed by Engr-in-Charge.

Supply, installation, hoisting and fixing in position of sign board made up of baked hardend alloy aluminium sheet 2mm thick of any size and shape with cleat including necessary handing arrangement of stainless steel flat of suitable size all around and crossed complete all as specified and directed by Engr-in-Charge.

S & Fixed 3M™ High Intensity Prismatic retro-Reflective Sheeting Series 3930 of approved colour/ shade fixed on aluminium sheet fully covered including lattered, writing information/ logo with same sheeting computerised cut in white colour/ shade. The letters approximately covering upto 50% area of the board complete all as specified and directed by Engr-in-Charge.

S & F for Stainless steel 316 bird proof spikes with polycarbonate base of size ( Length of unit= 300 mm, width of base = 45 mm, min height of spike = 115 mm ) including preparation of surfaces and fixing properly by using adhesive/ silicon/ other fixing arrangements as in parapets/ chajja/ projections/ and other locations in multistorey bldgs, complete all as specified and directed by Engineer-in-Charge.

S&F for 12 mm thick Beveled edge Toughned Glass Display (incl fixing and embbed different Coast Guard photos or logos or paintings suggested by user) fixed with screw with capping on wall patch fittings with cover plate of SS-304 Grade, complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating soil and greasy spots and preparation of old plastered wall surfaces and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick on fair face of brick work or concrete surfaces in CM 1:6 finished even and smooth wiithout using extra cement, complete all as specified and as directed by Engr-in-Charge

M&L for for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

RAJESH ENTERPRISE

Leo Elevator Company

shivshakticonstruction

Nitesh Enterprise

shree chamunda enterprise

K B N TRADERS

vijay infraprojects pvt ltd

roxy enterprise

JAMNAGAR ELECTRIC AND MACHINERY CO