NNT 2023-24 Construction of Community Hall at Thalavapalayam AD Street East in Punjai Thottakurichi Town Panchayat, Karur District.

Amount

Earth Work Excavation for Foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS 23 & 24, V, VI (S2), VII, 9,10

Plain Cement Concrete of mix 1 : 4 : 8 (One Cement Four Sand Eight Aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Supplying and Filling of U/S Gravel from approved quarry in Layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of material to site and all labour charges and all other incidential charges etc., complete as per Standard Specification.

Brickwork in Cement Mortor 1 : 5 (One Cement and Five Sand) using best quality of Flyash bricks of size 83/4x41/4x21/4 including all cost of materials and Labour Charges including Curing charges etc., Complete as per standard specification. Below Ground Level

Ground Floor

Supplying and Errecting Steel Centering including necessary supports for plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floors Complying with standard Specification without Strutting. ( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII Below Ground Level

Ground Floor

Column

Reinforced Cement Concrete 1:1.5 :3 (One Cement, One and Half Sand and Three Hard Broken Stone Jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs etc., complete complying with standard specification and as directed by the departmental officers Below Ground Level

Ground Floor

Supplying and Fabricating and placing in position mild steel of ribbed for steel bars for all R.C.C. works including bending, cranking binding etc., including cost of binding wire M.S. chairs laps to fix the reinforcement in all position all lasour and materials etc. Complete complying with standard Specification.

Providing Granolythic Floor finishing with cement concrete 1:2:4 (one part of cement , two part of sand and four parts of HBG jelly) mix using 10mm to 12mm ISS size HBG metal to 25mm thick including cost and conveyance of all materials etc. and all labour charges etc. complete as per standard specification and as directed by the departmental officers TNBP No. 39 F

Flooring with Ceramic Tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing with first quality colour Glazed Tiles of 150 mm x 150 mm x 6mm size of approved make and quality and colour set in Cement Mortar 1:2 (One Cement and Two Sand) and pointing with white cement neatly including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers.TNBP No:special

Plastering in C.M. 1 : 5 to (One Cement, Five Sand) 20 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Special Ceiling Plastering in C.M. 1 : 3 (One Cement, Three Sand) to 10 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Plastering in C.M. 1 : 5 to (One Cement, Five Sand) 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Supply and Fixing of Aluminium Door Single Leaf in position of Alumi natural colour mat finish door including cost and conveyance of materials and labour charges etc., complying with standard Specifications.

Supplying and Fixing 30mm thick Solid core PVC Door shutter with PVC frame of size 50x45mm with suitable rebate for housing the shutter (Confirming to IS 4020 with updated amendments) consisting of frame made out of MS tubes 19 gauge thickness etc., complete

Supplying, Fabricating and Fixing in position of Aluminium anodized natural colour matt finish Sliding Window arrangements and shutter arrangements so as to drain the water entering and made with extruded aluminium section of following sizes with necessary accessories such as rubber beadings, best quality rubber lock, handle and fixing 4mm thick plain/frosted glass including cost of all materials etc., complete.Supplying Fabricating and Fixing in position Aluminium Sliding window

Fabrication Supply and Fixing in position of Aluminium natural colour matt finish Louvered Ventilator in all floors made with extruded aluminium section of following size with necessary accessories such as rubber beading, best quality of handle, lock including supplying and fixing of 4 mm thick plain glass including cost of all materials, labour power consumption required for fabrication drilling holes in RCC column / floor slab / masonry wall wherever necessary with power drills to the required extent and making good to the original condition after fixing etc., and as directed by the departmental officers etc., complete. The aluminium frames to be anodised under electrically controlled condition in accordance with ISI 1868 / 1962 specification for an average anodic film thickness of not less 15 microns and all the materials should be got approved by the Executive Engineer before use on work.

Placing and Fixing of Steel Doors and Window with Grill including all cost of material and Labour including all incidental charges etc., complete complying with standard Specifications.

Supply and Fixing in position best quality of approved make Indian Water closet of size 580 x 440 mm with all accessories such as 'P' trap or S trap confirming to IS 2556 part XII with sand cusion and forming flooring alround the closet using 40mm levelling course 1:4:8 100mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the distrubed potion to original condition without leakage etc., including Labour charges for fixing etc.,

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories,With TW switch Box 5A FT Switch Flush with wall 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC cooncealed LIGHT /FAN point SD 25

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TWswitch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wireconnection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVCplug point.SD 37

Supply and run of 2x 4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class ‘B’) suitably bent at both ends with necessary angle iron upright and end supports for mains(PWD standard data No.SD. 69).

Supply and run of 2 of 4 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(PWD standard data No.SD. 64).

Supply and Fixing of Single box type 4'40 W Fluorescent fitting complete with copper choke and condenser conduit pipe suspension ceilingwith PVC unsheathed copper lead to fitting with tube SD 88

Towards Cost and Supply of Street Light Fittings including all cost and conveyance to site etc complete.

Supply and Fixing of TNEB meter Board suitable for 32A Single Phase Service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper Flat) on TW Plank of Size 375mm x 300mm x 19mm with Supporting TW Reepers of 1" thick an either side with Painting with Suitable bolt and nuts for fixing the TW Plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB Meter to Fuse Unit (SD No :125)

Supply and Fixing of Following PVC and GI Pipes and Specials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. etc., 32mm PVC Pipe

32mm PVC Coupling

32mm PVC Elbow

32mm PVC Bend

32mm PVC Tee

32mm GM Gate Value

HDPE Tank 1000 Ltr ISI/ISO

32mm PVC Nipple 150mm

32mm x 15mm PVC Reducer

15mm GI Tap

110mm PVC Pipe

110mm PVC Elbow

Supplying and Painting the walls with Two Coats Colour Cement Paint over one coat of cement primer as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.)

Painting New Iron Works such as Steel Doors, Windows, Ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

V.G.Senthilkumar