Special Repair of Matri Anchal building for Temple Trust Shri Naina Devi ji, for TTSNDJI, Distt. Bilaspur (HP) (a) Phase -1( From Room No.101-104)

Dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats, architrave,hold fasts etc. complete and stacking within all metres lead.Of area 3 sq. metres and below complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: (a) Cement Mortar 1:6 (1 cement : 6 coarse sand) 2nd class bricks. complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

15 mm cement plaster on the rough side of single or half brick wall of mix :- complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and including grouting the joints with white cement and matching pigments etc., complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge. (a) Size 800x1600 and 20 to 25 mm thickness. Kajaria, AGL make

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint cement slurry @ 3.3 kg/ sqm including grouting the joint complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge. (a) Size 800x1600 and 20 to 25 mm thickness.Kajaria, AGL make

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (A) Fixing with adjustable lugs with split end tail to each jamb metre complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge.:(a) W.C. pan with ISI marked white solid plastic seat and lid Cera / Hindware make

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood complete in all respects within all leads and lifts as per the direction and best satisfaction of Engineer in charge. (i) 35 mm thick