Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.4 LAdmitted-Finance | -15.65% | ₹3.4 L | L1 | Admitted-Finance |
| 2 | L2₹3.5 L+₹17,404.12 (5.17%)Admitted-Finance | -11.29% | ₹3.5 L+₹17,404.12 (5.17%) | L2 | Admitted-Finance |
| 3 | L3₹4.2 L+₹81,072.85 (24.1%)Admitted-Finance | +4.66% | ₹4.2 L+₹81,072.85 (24.1%) | L3 | Admitted-Finance |
Tender Value
₹4.0 L
EMD Value
₹7,984
Closing Date
12 Aug 2026, 3:00 pmClosed
AC works Ftr HQ BSF Tripura
The office of AC works Ftr HQ BSF Tripura, Salbagan, Agartala
Repair and maintenance of Garage, Servant room and surrounding area of Type -V Qtr No.01 at FTR HQ BSF Tripura.
2026_BSF_920248_1
IGA/ENGG/E-NIT (CIVIL)/26-27/18
Open Tender
Civil Works
Works
60 days
FTR HQ BSF Tripura Salbagan
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹7,984
15 Sept 2026
3 Aug 2026
13 Aug 2026
3 Aug 2026
12 Aug 2026
3 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | 0.58 | cum | 260.3 | ₹150.97 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.68 | cum | 7,878.5 | ₹13,235.88 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.58 | cum | 6,518.6 | ₹3,780.79 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6(1 cement :6 coarse sand) | 1 | cum | 7,132.25 | ₹7,132.25 |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4(1 cement :4 coarse sand) | 4.98 | sqm | 905.05 | ₹4,507.15 |
| 6 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 13.62 | sqm | 1,267.95 | ₹17,269.48 |
| 7 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood | 1.97 | sqm | 4,852.3 | ₹9,559.03 |
| 8 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | 1 | each | 260.6 | ₹260.6 |
| 9 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm | 2 | each | 115.15 | ₹230.3 |
| 10 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm | 2 | each | 66.25 | ₹132.5 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BOQ_967063.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .