REPAIRS TO ROOF TREATMENT AND THEIR CONNECTED ITEMS IN CERTAIN BLDGS OF OMQ, MAP AND BILLETS AREA AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies / chajjas of building including removal of debris out side MD land all as directed.

M&L for providing screed bed of 15mm thick in CM 1:4 for laying floor finish, mixed with WPC as per manufacturer's instruction on fair faces of concrete surfaces without using extra cement as in roof complete all as specified and directed. Note:- WPC shall be measured & paid separately.

M&L for water proofing treatment to slab area with APP membrane 3.00 mm thick polyester modified preformed membrane mineral finish with the help of torching with side overlap of 100mm to be done over one coat of bitumen primer apllied with brush/roller laying achieving a forced coverage of 4 sqmt/ltr as per manufacturer's instructions complete all as specified and as directed.

Supply only liquid waterproofing compound

M&L for Providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) of average thickness 50 mm in adequate slope on roof surfaces for padding to achieve the 1:40 slope complete all as specified and as directed.

M&L for disconnecting existing tanks of capacity exc.500 ltr and n exc 1000 ltr, setting aside (or lowering if required) for repairs of tank base platform, etc. and reconnecting and re-fixing in position.

Dismantling of ceiling board with fittings and any description including cover fillets as directed.

S&F False ceiling with 12mm thick of size 1.20m x1.80m plaster of Paris sheets fixed with machine screws on and including GI channel 22 gauge thick grid work, main joists placed at 1.20m center to centre, cross joists placed at 450mm centre to centre, hanging with 22 gauge GI strip suspenders from roof, ‘J’ hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with Gypsum anhydrous binder and prepare the surface till smooth surface is achieved and applying two coats of texture paint of any pattern and design over a coat of texture primer on ceiling sheets all complete as required as per manufacturer’s instructions and as directed. (Pattern and design shell be directed by Engr in Charge during execution of work) (The exposure surface of the false ceilng shall be joint less even smooth to recive texture paint) (The POP Sheets shall be fixed with suitabe screws below the grid) shall not be placed over the grid)

M&L decorative cornices/moulding using POP of cross sectional dimension exc. 25 Sqcm and n.exc 50 Sqcm as per pattern and design as approved and fixed in position including preparation of surfaces and applying two coats of textured paint over primers match with the ceiling sheets all complete as required and as directed. (Pattern and design shell be directed during execution of work)

Complete removal of the existing treatment on old/ new plastered surface of walls/ceiling and applying two coats of plastic emulsion paint over a coat of approved primer matching with the colour of ceiling sheets complete inclding one coat of average POP punning of average thickness 3mm complete all as specified and directed. (The POP Punning shall be carried out immediately after removing the existing treatmet of wall surfaces. Applicatin of Plastic emulsion paint shall be carried out by Roller application in monolithic manner)

S&F False ceiling of non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600mmx600mmx4mm thick over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main and cross member) of size 20mmx20mmx1.00mm thick in square pattern of grid size 600mmx600mm. The aluminium frame work will be supported on side wall with the use of 'L' section of size 20mmx20mmx1.00 angles etc.Snap grid shall be supported with hangers of 4mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of galvanised iron flat of size 40 x 3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40mm long complete all as specified directed. Make : Everest or equivalent as approved by GE.

Demolition of brick / stone / PCC block masonry built in cement mortar including all quoins, pillars, arches etc. including removal of debries out side MD land, complete all as specified and as directed.

M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement complete all as specified and as directed.

M & L for preparation of plastered surfaces of walls including pilasters / cornices etc and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete all as specified and as directed.

Dismantling of Plain or corrugated Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 of 0.80mm thick of any colourl, fixed with self tapping screws complete all as specified and as directed.

M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface, cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding, formwork etc up to 9 Mtr heigh and applying 10 mm thick rendering in cement mortar 1:3 , finishing the surface even & smooth with out using extra cement complete all as specified and directed. NOTE: Reinft will be paid separately.

M&L MS steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment on old surfaces wall and application of 3mm thick wall care putty complete all as specified and directed.

M&L preparation of old surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store all as directed.

All as per tem No 24 above but 20mm dia.

Supply and fix 15 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concealed or exposed /ceiling or laying in floors complete all as specified. Note:- Cutting chease wherever required will be measured & paid separately.

Supply and fix 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified and directed. Note:- Cutting chease wherever required will be measured & paid separately.

M&L for Cutting chases, pinning in, for concealed water tubing on Concrete block walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

S&F in repair 15 mm size bib tap (straight line model) with wall flange, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Plumber economy series or equivalent.

S&F in repair 15 mm size Angular stop cock with wall Flange complete all as specified and directed. Make : Plumber economy series or equivalent.

S&F in repair 15 mm size pillar cock stop cock with wall Flange complete all as specified and directed. Make : Plumber economy series or equivalent.

S&F in repair Overhead Shower 150mmx150mm square Shape Single Flow with Air Effect (Body & Face Plate brass with Chrome Plated) with Rubit Cleaning System, sutaible for 15 mm size pipe fixed to steel pipe complete all as specified and directed. Make : Plumber Cat No Square '6' or equivalent series or equivalent.

S & F in repairs shower arm 400x25x25mm square shape for wall mounted showers with flange (Cat No SHA 455L400) complete all as specified and directed.

S&F in repair health fauset (Hand shower) with 8mm dia 1 metre long easy flex tube and in chorme finish & wall hook, fixed to EWC complete all as specified and directed.

S&F in repair 15mm bore Wall mixer 3 in 1 system with provision for both telephonic shower & overhead shower system complete all as specified and directed. Make : Plumber economy series or equivalent.

S&F in repairs telephonic shower multiflow 100 mm dia (ABS chrome plated) with 1.5 m flexible tube with 12 mm dia & swinging wall hook complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

S & F in repairs two piece wall hung EWC with cistern size 65.5x36.5x75.5cm including custom made seat cover and twin flush fitting complete all as specified and directed.

S&F in repairs Chromium plated corner glass shelf size 12 inch with bracket complete all as specified and directed.

S&F in repairs plastic sheet covers for water closet, black, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed.

Supply and fix in repair 500 litres capacity triple layer (white), rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fix in repair 1000 litres capacity tripple layer, rotational moulded, polythene water storage tank with cover (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs 25mm bore Ball brass valves, high pressure,with polythene float and flynut, screwed for iron pipe fixed complete all as specified and directed.

S H CONSTRUCTION

suvidhiconstruction

VINUBHAI P. CHANDRA

MADHAV ENTERPRISE

KEVAL ENTERPRISE

SURAJ ENTERPRISE

SohanandCompany

RACON CONSTRUCTION