KMDA/CIVIL/EandAM /SE (C)/eNIQ-16 of 2019-20

Amount

Dismantling of Aircraft TU-142 at INS Rajali, Aarakonam. Refer Technical Bid for detailed scope of work.

Transportation of dismantled TU 142 parts from INS Rajali, Aarakonam to site location at Kolkata.

Reassembling of Aircraft at site location. Refer Technical Bid for detailed scope of work.

Refurbishment of Aircraft. Refer Technical Bid for detailed scope of work.

Internal Renovation of TU-142 Aircraft suiting to requirements of Museum at Kolkata. Refer Technical Bid for detailed scope of work.

Cockpit exit aluminum/M.S. ladder with padding and railing on both sides with width of 0.9 Mts and height 3.6 Mts and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers

Cockpit Entry aluminum/ M.S ladder with padding and railing on both sides with width of 0.9 Mts and height 6.0 Mts and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Flooring with Plywood 18mm thick (Antitermite, water proof) including SS supporting frame & side hand railing with a height of 0.90 mts from cabin No. 4 to Cabin 8 with Carpet and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Internal painting inside the cabins where necessary and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Restoration of existing seats and arm rests with new cushion and leather covering and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Operation of front cabin movable floor by suitable electrical motor and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Providing toughened glass on top of movable floor in the cockpit and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Clearing of front cockpit and scrapping to make in original cabin shade to restore its originality and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Providing curtains for windows in the cockpit including cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Providing carpets in front cabin and the rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Providing manquens 13 Nos. with uniform to make them site in the cockpit seats. The rate includes cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Providing all round way up of the existing machinery/cable with the help up polycarbonate See thorough Sheet from Cabin No.4 to CabinNo.8 including the boundary section, cost and conveyance of all materials, all leads and lifts, all incidental charges etc., complete for finished item of work as directed by the departmental officers.

Providing Internal LED Lighting, Focus LED Lighting & Floor mount/ceiling mount/ LED Tube lights etc., for internal illumination of the Air Craft Museum with necessary wiring with plug points, Fire proof anti rodent cables and cable ducts including switch gear and connection from external electrical control room ISI Make as directed by Department Officers ( LED Lamps of 2 W to 12 W)

Operationalisation of gun & rear cockpit entry door etc., and as directed by the departmental officers.

Providing electrical mechanism towards operationalisation of Radar in cabin No.5 with seethorough glass floor on top etc., and as directed by the departmental officers.

Providing electrical mechanism towards operationalisation of Radar in cabin No.5 with seethorough glass floor on top etc., and as directed by the departmental officers.

Providing 0.75 Mts to 0.90 Mts clear way for movement of tourists with height of the door/opening of 1.8 Mts to 2 Mts where ever duly removing carefully the wires/pipes/special parts of Air Crafts and placing the same at suitable location as direction by the Department Officers for finish item of work( Including refurbishment as per the original design) at the fuel tank cutting area i.e., Tank No.6 at the joining area of wings ( this has to be done duly calculating and furnishing the design/load calculations with additional strengthen of the plate/structural members with design by structural consultant from reputed Universities/Engineering College. (b) For Cabin No.5 i.e., Fuel Tank area

Providing 0.75 Mts to 0.90 Mts clear way for movement of tourists with height of the door/opening of 1.8 Mts to 2 Mts where ever duly removing carefully the wires/pipes/special parts of Air Crafts and placing the same at suitable location as direction by the Department Officers for finish item of work( Including refurbishment as per the original design) at the fuel tank cutting area i.e., Tank No.6 at the joining area of wings ( this has to be done duly calculating and furnishing the design/load calculations with additional strengthen of the plate/structural members with design by structural consultant from reputed Universities/Engineering College. (a) For Cabin No.6 i.e., Fuel Tank area

Providing 0.75 Mts to 0.90 Mts clear way for movement of tourists with height of the door/opening of 1.8 Mts to 2 Mts where ever duly removing carefully the wires/pipes/special parts of Air Crafts and placing the same at suitable location as direction by the Department Officers for finish item of work (Including refurbishment as per the original design)

Cutting of raised platform areas at the cabins where ever necessary including cost of cutting properly and carefully removing the parts at the floor and strengthen the all round surface of the at the cutting area with necessary M.S.Frame and stiffeners and making all-round frame with internal bracing and providing 16mm toughened glass for seethrough flooring etc., complete for finished item of work as directed by the Departmental Officers from Navy and VUDA.

Cutting of internal cabin walls/frames to make the entry and exit vents of size 0.75 x2.00 Mts where ever necessary including cost of cutting properly and carefully and removing the parts at the hatch and strengthen the all round surface of the fugelage at the cutting area with necessary M.S.Frame and stiffeners. Providing opening to facilitate easy movement of tourists including the cost of material , necessary fixture like handles, hinges, washers and water proof gaskets etc., for finishing item of work including properly securing of all running cables pipes etc., as directed by the Departmental Officers from Navy and VUDA.

Entry and exit hatches Cutting of fugelase to make the entry and exit hatches of size 0.90 x 2.00 Mts where ever necessary including cost of cutting properly and carefully and removing the parts at the hatch and strengthening the all round surface of the fuselage at the cutting area with necessary M.S.Frame and stiffeners. Providing door/hatch type of opening to facilitate easy movement of door for regular operation to tourists including the cost of material , necessary fixture like handles, hinges, washers and water proof gaskets etc., for finishing item of work including properly securing of all running cables pipes etc., as directed by the Departmental Officers from Navy and VUDA

Supply and delivery of 20 tonnes capacity ACs (5 tonne X 4 unit) at site as per approved, make and specification.

AIR WORKS INDIA ENGGINERING PVT LTD

Deep Engineering Industries