PROVN OF SPECIAL REPAIR INTERNAL ELECTRIFICATION BEER GODOWNS OF CSD DEPOT AND CERTAIN SANCTIONED WORKS AT AHMEDABAD CANTT

Amount

Taking down carefully surface aluminium point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed / surface rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered for mounting of Modular switches, sockets, fan regulators complete as directed for the following :-

One light / Exhaust fan point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

S&F sleek & curvy plates with elegant looks comes with sturdy support frame for solids strength of following size :-

Plates & frame 86x86, 1 module. Make : Legrand Part No : 673491

Plates & frame 86x86, 2 module. Make : Legrand Part No : 673492

Plates & frame 86x86, 4 module. Make : Legrand Part No : 673493

Plates & frame 86x86, 8 module. Make : Legrand Part No : 673494

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with for one 16 amp socket outlet modular type for controlled by one switch on independent board complete.

S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref no. 675501 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref no. 675511 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6/16 - 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675555 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675552 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref no. 675530 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make : Ligrand/Havells/Standard

S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 54 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:-

SPN, 240 volts, 8 ways. Make - Legrand cat ref no 607711 or equivalent in Havells/ Standard as approved.

SPN, 240 volts, 4 ways. Make - Legrand cat ref no 607710 or equivalent in Havells/ Standard as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x4 sqmm + 1x4 sqmm earth wire complete.

S&F Highbay/Mediumbay LED 80 watt energy seving, environment friendly and robust, IP 65, IK 07 luminaire with high efficacy of >150 lm/W with M16 x 1.5 gland for cable entry, made out of aluminium alloy pressure die casted housing, powder coated of colour munshell grey finish & control gear box of , tempered protective toughened glass, built in electronic driver with APFC, lower THD, open circuit protection, surge voltage protection upto 10KV with built in SPD as per IS 15885 part-2/sec 13, with mounting suspended by means of heavy duty nickel plate complete all as directed. Make : Havells, Model : Saucer, Cat No. BAYBRIGHTSAUCERHBP80WLED or equivalent in Philips / GE Lighting.

S&F LED tube light fittings 2x18 watt, IP 65, IK 08, corrosion resistant unbreakable polycarbonate, impact proof, surface /suspended mounting using SS clip luminaire with clear polycarbonate cover, complete internal wiring including 2xretrofit LED18W lubelight with single side connection, powder coated CRCA sheet as reflector complete all as directed. Make : Havells, Model : Magnum Retro, Cat No. MAGNUMRETROILS2X18PC or equivalent in Philips/ GE Lighing.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Havells or GE Lighting as approved.

S&F LED 20 Watt streetlight made up of prressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP 65 protection complete with fixing arrangement and connection as directed as per Bajaj cat ref No. BCLST 20W LED I code 169829 or equivalent in Havells or Wipro as approved.

S&F Ceilling fan 1200mm sweep, Energy efficient high performance copper wounded , BLDC white in colour complete with accessories and fixing arrangement with provisioning of 1.2 mtr long fan down rod and clamps, hook etc. Make : Havells, or equivalent in Bajaj or USHA.

S&F Wall fan 400 mm sweep, 50 watt, 1350 RPM, white with 120 ribs guard better air delivery Pull cord control for speed & oscillation On-Off. Aerodynamically designed & balanced blades complete all as directed. Make : Havells Model : Swing or equivalent in Bajaj or USHA.

S&F Heavy duty exhaust fan 380mm sweep single phase 145 watt, 900 rpm, corrosion resistant body totally enclosed, IS : 2312-1967 aerodynamically contoured blades with rigid brame with rubber mountings pads grey with bird guard, double ball bearings heavy duty motor with pressure die cast aluminium complete all including making opening in wall and make good with plaster in surface of wall complete fixing arrangement as directed. Make : Havells, Model : Turbofoce SP or equivalent in Bajaj or USHA.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp. Make : Legrand/Hager/Siemens

Double pole 10 to 32 amp. Make : Legrand/Hager/Siemens

Four pole 63 amp. Make - Legrand cat ref no 408702 or equivalent in Hager or Schneider as approved.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully aluminium submain wiring with PVC surface conduit and making good disturbed surfaces complete.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with GI strip 32x6 mm from pit to high mast light, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete.

Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete.

Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

S&F steel tubes 40 mm bore light grade ISI marked in road crossing/along the pole etc complete.

Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade XLPE insulated and PVC sheathed steel tape / wire armoured solid aluminium conductor cable of nominal cross sectional area 10 sqmm 4 core complete. Make : Havells / Poly Cab/ Finolex

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 complete.

M&L for steel tubular swaged pole 8.5 m long type 410 SP-22 with cast iron or welded MS base plate including nuts / bolts / washers etc conforming to IS-2713 (Part I to III) of 1980 and including junction box with metric knockout size 200x160x98mm, Hansel make, cat part No K9250 with the following :-comprising of following:-

Excavation in post holes in any type of soil not exceeding 0.5 cum each, getting out, returning filling in and ramming earth in layers not exceeding 25 cm watering and disposal of surplus soil to a distance not exceeding 50 m and making good surface complete.

PCC (1:4:8) type D2 using 40 mm graded stone aggregate in base (0.60 m dia x 0.15 m height).

PCC (1:3:6) type C2 using 40 mm graded stone aggregate in foundation filling (0.60 m dia x 1.5 m height).

PCC (1:2:4) type C2 using 40 mm graded stone aggregate in coping (0.60 m dia x 0.45 m height).

Pole cap 0.30 m long externally fitted on pole top duly welded with a light grade ISI marked GI pipe bracket 1.5 m long for mounting street light fitting.

Painting with aluminium paint one under coat, one finishing coat over a coat of red oxide primer and making alternate colour bands of black & white colours in 30 cms width upto a height of 1.5 m from pole coping with synthetic enamelled paint complete.

Renewal of any type street light junction box with thermoplastic, IP 65 cable junction box with metric knockouts on all sides for cable entry size: 200 x 160 x 98 mm as per Hensel cat ref no. K 9250 or equivalent in Eaton or Rittal or Secure duly fitted with followings:-

One number DIN Rail (35 mm).

Four numbers ELMEX or equivalent make connector of 10 sqmm.

One number ELMEX or equivalent make end plate.

Two numbers ELMEX or equivalent make end clamps.

One number MCB SP 6 amp, 10 KA, 'C' series of Legrand make (cat ref no 408587) or equivalent in Hager or Schneider as approved.

Supply, installation, testing and commissioning of integral driver LED street light with a nominal system lumen output of 7200 lumens and a minimum system efficacy of 90 lumen/watt including connecting with two core PVC 1.5 Sqmm wire from light fitting to junction box. The luminaire shall have rated system lifetime of 50,000 burning hours before reaching at L70. The luminaire should have cool white colour temperature (CCT > 5000K) and a CRI >70. The luminaire shall meet IP 66 rating & IK05 rating with THD < 20% & PF > 0.9. The luminaire housing should be made of pressure die cast aluminium with a flat glass optical cover. The total power consumption should not exceed 72 watt including driver. Make - Philips Greenline cat ref BRP410 LED CW 072 MR FG S1 PSU GR or equivalent in GE Lighting or Wipro as approved.

S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature settings between 25°C to 75°C, outer tank made of non metalic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete. Make: Havells Quatro or equivalent in Daspass or Racold or Bajaj as approved.

S&F water heater 50 litre capacity BEE star rating 5, in approved colour, heating element 2.5 KW, adjustable temperature setting knob for temperature settings between 25°C to 75°C, outer tank, made of non metalic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete. Make:- Havells Opal or equivalent in Daspass or Racold or Bajaj as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metalic PVC conduit, medium grade, ISI maked ivory colour alongwith accessories of following nominal sizes:-

2x6 Sqmm + 1x6 sqmm earth continuity conductor in 20mm dia conduit.

Supply only brass chromium plated, flexible pipe connection 15mm bore heavy duty suitable for hot water supply with two numbers brass chromium plated union at ends 450mm long complete all as specified and directed.

S&F 15mm bore angle cock with flange and 15mm nipple complete all as specified and directed (Cat ref No 8310 of Make Prayag or its equivalent make)

ALBA AC AND REF SERVICES

Vardaini Industries

SATISH ELECTRICALS

Tech Serve Solutions