Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | L1 | Accepted-AOC 1ST LOWEST | |
| 2 | L2₹3.7 L+₹3,004.55 (0.83%)Rejected-AOC ALUVA | KOTTAYAM | KERALA | 686102 | L2 | Rejected-AOC 2ND LOWEST |
| Sl No | Description | Qty | Unit | joby L1 | SOCIO ECONOMIC UNIT FOUNDATION L2 |
|---|---|---|---|---|---|
| 1.00PET BOTTLE COLLECTION BIN | |||||
| 1.00 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil | 6.91 | sqm | 116 ₹801.79 Lowest | 118 ₹815.62 |
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 34.56 | sqm | 360 ₹12,441.6 Lowest | 362 ₹12,510.72 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 4.9 | cum | 8,560 ₹41,909.76 Lowest | 8,630 ₹42,252.48 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 707.2 | kg | 180 ₹1,27,296 Lowest | 182 ₹1,28,710.4 |
| 1.00 | OD538245/2024-2025:Providing and fixing Aluminium traford sheet pre coated (size,shape and pitch of corrugation as approved by Engineer - in - charge ) 0.45mm total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meters or as desired by Engineer in charge . The sheet shall be fixed using self drilling/ self tapping screws of size (505*55 mm ) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 57.6 | sqm | 812 ₹46,771.2 Lowest | 838 ₹48,268.8 |
| 1.01 | 10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides | 57.6 | sqm | 897 ₹51,667.2 Lowest | 902 ₹51,955.2 |
| 1.01 | 10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | 13.52 | sqm | 5,606 ₹75,793.12 Lowest | 5,630 ₹76,117.6 |
| 1.01 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | 8 | no | 184 ₹1,472 Lowest | 185 ₹1,480 |
| 1.01 | OD538244/2024-2025:padlock | 8 | no | 135 ₹1,080 Lowest | 137 ₹1,096 |
Tender Value
₹3.4 L
EMD Value
₹8,467
Closing Date
6 Jun 2025, 10:00 amClosed
ASSISTANT ENGINEER LID AND EW,NAYARAMBALAM
ASSISTANT ENGINEER LID AND EW,NAYARAMBALAM G.P
176/22-23-SUCHITHWAM-MALINYA SAMSKARANAM -PLASTIC WASTE MANAGEMENT UNIT
2025_LSGD_766980_1
233/25-26/AELSGD/NBLM
Open Tender
Civil Works - Buildings
Item Rate
NAYARAMBALAM GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹750
Yes
₹8,467
Yes
17 Nov 2025
30 May 2025
7 Jun 2025
30 May 2025
6 Jun 2025
30 May 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .