Improvement, Widening and Strengthening of Jhamoon to Jaisinghpur road Km 8/0 to 18/300

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual /machanical means including saturated soil comprising of ordinary soil, ordinary rock,soft rocks, hard rocks, chiseling/ wedging out of rock ( where blasting is prohibited) and their intermediate classification of soil, complete including setting out true to the required line, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in- Charge at site according to the M.O.R.D. technical specification section 300 and 1600 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of on useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus / unuseful material to the approved dumping sites through all modes of transporation including head load or animals transport or mechanical means along with its leveling fine dressing and hauling /carriage of machineries, materials, tools equipments and safety measures. Recovery for useful stone of 485.69 cum (four hundred eighty five decimal six nine cubic metre) at the rate of Rs. 300/- (Rupees Three Hundred) per cubic metre shall be effected from the contractors running bill on pro-rata basis as per actual quantity executed. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, blasting is prohibited, as per drawings and MORD technical specification section 300 and 1600 and as per directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm ( one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement: four sand : eight graded crushed / broken stone aggregate 40 mm (forty milimeters) nominal size ) and curing complete including the cost of form work in Retaining walls, Breast walls, on ground or under water complete including, pumping or bailing out water ,dewatering removal of slush as required at site which may arisen at the time of laying concrete complete for all heights/depths including cost of form work as per drawings and MORD technical specifications section 800, 900,1200 & 1600 and as per the direction of Engineer-in-Charge . including carriage of material within all leads, lifts and other incidentals .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.

Back filling with granular material behind abutments, wing walls, return walls and retaning walls complete as per drawing and M.O.R.D. technical specification section 1200, 1600 and as per the directions of Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government.

Providing weep holes in brick masonry/stone masonry/plain or reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimetre) dia P.V.C. pipe extending through the full width of the structures with slope of 1(V): 20(H) towards draining face complete as per drawing and M.O.R.D.technical specification section 700 & 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete using plain cement concrete grade M-10 ( M ten) with minimum nominal mix 1:3:6 (one cement is to three sand is to six crushed stone aggregate 40mm( forty millimetre) nominal size) on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work in toe wall etcetra as per drawings and M.O.R.D. technical specification section/ clause 802, 803, 900 and 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete using plain cement concrete grade M-10 ( M ten) with minimum nominal mix 1:3:6 (one cement is to three sand is to six crushed stone aggregate 20mm( twenty millimetre) nominal size) on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work in drain as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure for all type of structure complete using plain cement concrete grade M-15 ( M fifteen) design mix with cement contents not less than 275 kg (two hundred seventy five kilograme) per cubic metre on ground or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work in Parapet and toe wall etcetra as per drawings and M.O.R.D. technical specification section 800, 900 & 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated concrete for reinforced concrete in substructure using reinforced concrete grade M-20 ( M twenty ) design mix with cement contents not less than 330 kg (three hundred thirty kilogram) per cubic metre with 20mm (twenty millimetre) nominal size graded crushed stone aggregate as per drawing and M.O.R.D. technical specification section 800,900 and 1200. Including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block, dirt wall etcetra and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D.. technical specification section 800, 900 and 1400 using R.C.C. grade M-25 ( twenty five) design mix with cement contents not less than 400 kg (four hundred kilogram) per cubic metre with 20mm (twenty millimetre ) nominal size graded crushed stone aggregate and curing complete including cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab and to the entire satisfaction and as per the direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals .The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structures complete as per drawings and MORD technical specifications section1000 and 1400, including cutting, bending, binding and placing in position complete in all respect including the cost of binding wire upto all heights / depths or as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete M-15 (M- fifteen) nominal mix 1:2.5:5 (one cement is to two and half sand is to five graded crushed stone aggregate 40mm (forty millimetre) nominal size) on ground or under water and curing complete for 14 (fourteen) days , in cradle bedding for hume pipe including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights / depths including the cost of form work complete as per drawings and M.O.R.D. technical specification section 800,900 and 1100 as directed by the Engineer-in-Charge including carriage of material within all leads ,lifts and other incidentals. The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying rubble stone flooring in cement morter 1:3 ( one cement : three sand) laid over cement concrete bedding of grade M-15 ( M-fifteen) inclusive of its cost complete as per drawing and MORD technical specification section 1300 to the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate is including octroi, royality, GST, tolltax or other taxes imposed by the government.

Filling in foundation trenches as per drawing & MORD technical specification section 300 earth filling as per direction of the Engineer-in-Charge including carriage of materials within all leads , lifts and other incidental. The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying ( to level or slope) 900mm dia (nine hundred millimetre ) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding of granular materials in single row including fixing collar with cement mortar 1 : 2 ( One cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications section 1100 and as per direction of Engineer - in- Charge including carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government.

Construction of granular sub-base by providing well graded material as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 ( eighty to hundred) KN static roller to achieve the desired density, complete as per drawing and MORD technical specification section 400 for grading 1 material and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing laying spreading and compacting by mechanical means 75 mm (seventy five millimetre) compacted thickness broken /crushed of stone aggregate of size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to hundred ) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.20 cum (zero point two zero cubic metre) per ten square metre and binding material at the rate of 0.06 (zero decimal zero six) cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per drawing and M.O.R.D. technical specifications section 405 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing laying spreading and compacting by mechanical means 75 mm (seventy five millimetre) compacted thickness broken /crushed stone aggregate of size 53mm to 22.4mm (fifty three millimetre to twenty two point four millimetre) nominal size Grading-III to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.18 cum(zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per drawing and M.O.R.D. technical specifications section 400 and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. per Sqm. ( zero point eight five kilogram) per square metre using mechanical means as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.275 kg. (zero point two seven five kilogram) per Square metre on the prepared granular surface treated with primer and cleaned with hydraulic broom as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.225 kg. (zero point two two five kilograms) per Square metre on the prepared bituminious surface treated with primer and cleaned with hydraulic broom as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying bitumenous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site in all leads and lifts laid over previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and laying 30mm (Thirty millimetre) compacted thickness bituminous concrete with minimum 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading -II using crushed aggregates 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading, premixed with bituminous binder VG-10 (viscosity grade ten) at the rate of 5.40 to 5.60 (five decimal four zero to five decimal six zero ) per cent of mix weight of transported to site, laid with a censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth three wheeler 8-10 (eight to ten) tonne capacity or pneumatic type roller of 12-15 (twelve to fifteen ) tonne with type pressure of at list rolling with 6-8 ( six to eight) tonne smooth wheeled tandem rollers to achieve the desired compaction as per MORTH specification section 500 as per the direction and entire specification of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, GST, Malkana, toll tax or other taxes imposed by the Government.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design and laid over a prepared sub base with 43(forty three) grade cement or any type as per clause 1501 M-30 (M- thirty) grade, design mix cement concrete, coarse and fine aggregates conforming to IS:383(three hundred eighty three), maximum size of coarse aggregate not exceeding 25mm(twenty five millimetre ) mixed in a concrete mixer of not less than 0.2 (zero point two) cubic meter capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work ( steel channel), laying and fixing of 125(one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing, spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators and finished in continuous opreation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant,dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days (Fourteen) using curing compound (where specified) and water, finishing to line and grade as per drawing and M.O.R.D. technical specification section 1500 as per directions of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation with in all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete M-15 (M- fifteen) grade of standard design as per IRC:8, (8) fixing in position including painting etcetra as per drawing and MORD technical specification section 1700 including mechanically mixed and vibrated (fifth killometre stone precast) including houling /carriage of material to various location through all modes of transporation within all leads ,lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete M-15 (M- fifteen) grade of standard design as per IRC:8, (8) fixing in position including painting and printing etcetra as per drawing and MORD technical specification section 1700 including mechanically mixed and vibrated Ordinary Killometre stone precast including houling /carriage of material to various location through all modes of transporation within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete M-15 (M- fifteen) grade of standard design as per IRC:8, (8) fixing in position including painting and printing etcetra as per drawing and MORD technical specification section 1700 including mechanically mixed and vibrated 200 metre (two hundred metre) stone precast including houling /carriage of material to various location through all modes of transporation within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 (six hundred) millimeter equilateral triangle as per IRC:67 made of 1.5 mm(One decimal Five millimeter) thick MS sheet duly stove enamalled white colour in front and gray colour on back with red reflective border of 65 mm (Sixty Five millimeter) width and required letters and figures with reflective tape engineering grade required shade and colour supported and welded on 47mm x 47mm x12(Forty seven into forty seven into twelve) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450 x450 x 600 mm, (Four Hundred Fifty into Four Hundred fifty into Six Hundred millimeter), 600 mm (six Hundred millimeter) below ground level as per approved drawing and MORD specification section 1700 as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

Providing and fixing Semi Reflective Traffic Signs Direction and place indentification signs more than 0.90 sqm (Zero decimal nine zero square metre) size board as per IRC:67 made of 2mm (Two millimeter) thick M.S. Sheet duly stove enameled paint white colour in front and gray colour on back with reflective border of 70mm (Seventy millimeter) width and required message, letters, figures with reflective engineering grade tape of required shade and colour. Supported and welded on 47mm x 47mm (Forty Seven into Forty seven millimeter) of 12 SWG Square tube of 3050 mm height duly strengthened by 25mm x 5 mm (Twenty five into five millimeter) Mild Steel flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450mm x 600 mm (Four Hundred Fifty into Four Hundred fifty into Six Hundred millimeter), 600 mm (Six hundred millimeter) below ground level as per approved drawing and MORD specification section 1700 including hauling/ carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete and as per direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Providing and fixing Semi Reflective Traffic Signs Direction and place indentification signs board as per IRC:67 made of 2mm (Two millimeter) thick M.S. Sheet duly stove enameled paint white colour in front and gray colour on back with reflective border of 70mm (Seventy millimeter) width and required message, letters, figures with reflective engineering grade tape of required shade and colour. Supported and welded on 47mm x 47mm (Forty Seven into Forty seven millimeter) of 12 SWG Square tube of 3050 mm height duly strengthened by 25mm x 5 mm (Twenty five into five millimeter) Mild Steel flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450mm x 600 mm (Four Hundred Fifty into Four Hundred fifty into Six Hundred millimeter), 600 mm (Six hundred millimeter) below ground level as per approved drawing and MORD specification section 1700 as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government.

G.P.ACHARYA

VISHAL RAJPUT