INTERLINKING MALAYAMMA FEEDER FROM KARUVARAPATTA COMPANY MUKKU TO MUDOTTUPOYIL USING COVERED CONDUCTOR UNDER ELECTRIC SECTION KATTANGAL

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading HT A type pole to Hand cart from the stacking place and unloading the same at work site.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Providing bridging at Cut points for 3 PH 11kV line with XLPE Insulated ACSR Raccoon

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon

Dismantling (without damage) one LT TW/RSJ/Rail Strut pole incl. removal of clamps and stacking

Dismantling one damaged LT TW/RSJ/Rail pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one LT 2 line cross arm from existing pole.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion

Redoing /renewal of damaged/old/joined 3 phaseWP service wire cmplete including lowering down the guy wire and WP portion (cost index(e) : 1 included in Rate)

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Erection of suspension clamp for LT ABC of any size

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Fitting one set AB switch and giving connection

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm.

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads

Please Enable Macros to View BoQ information