PROVN OF PCC DRAIN INCLUDING COVERED SLAB AT TRANSIT CAMP AND SPL REP TO REPLACE UNSERVICEABLE CFL STREET LIGHT/SECURITY LIGHT FITTINGS TO LED FITTINGS AT VARIOUS UNIT AT DRASS

Amount

Excavation in trenches, not exceeding 1.5mtr wide and not exceeding 1.5 mtr depth, for foundation, etc, or for shafts, wells, cesspits, manhole, pier holes etc not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-charge.

M&L for Plain cement concrete 1:4:8 type D-2, (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed by Engineer-in-charge.

M&L for Precast cememt concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge.

M & L for rendering 15 mm thick on vertical surfaces in CM 1:4, finished even and fair, complete all as specified and directed by Engr-in-Charge.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engineer-in-charge.

Removal surplus soil not exceeding 50mtr and depositing where directed at level not exceeding 1.5mtr above the starting point, complete all as specified and directed by Engineer-in-charge.

Providing plain cement concrete B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in coping, bed plates, seismic bands, lintels upto 1.5 m clear span, plinth courses and other similar bands the like finished fair & even, including necessary form work, complete all as specified and directed by Engr-in-Charge.

M & L for Reinforced concrete pipes 600 mm dia, class NP2, laid and jointed complete with collars all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant priming coat , complete all as specified and directed by Engr-in-Charge.

M&L mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips.

Providing precast cement concrete Type B-1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water oughs, mangers, shelves and similar articles with plain frames set in CM1:6 , all as specified and directed.

M&L for cement 1:2:4 type B-2 (Using 40 mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed by Engr-in-Charge.

M&L for forming fair finishes drain or channel 30 cm inner girth in cement concrete using extra cement all as specified and directed.

S&F Street light bracket made out of GI pipe 35 mm dia light grade 1.2 mtr duly bended in position as per site requirement and including 2 Nos and 2 set MS flat iron clamps of suitable size complete with 03 set nut , bolts and washers for mounting street lights including taking down existing bracket, complete all as specified and directed by the Engr-in-Charge.

Dismantling of existing old unsv light fittings of any make, type /capacity complete all as specified and directed by the Engr-in-Charge.

Supply anf fixing of LED street light fittings 1x40 W with pressure die cast alumunium housing comprising of epoxy powder coated enclosed with glass cover in frame IP-65 protection mounted on MCPCB complete. Make Philips Cat Part No. BRP 409 LED040CW HO MRFG S1PSU GR or equivalvent in Bajaj, Havells, complete all as specified and directed by the Engr-in-Charge.

Supply anf fixing of LED street light fittings 1x90 W with pressure die cast alumunium housing comprising of epoxy powder coated enclosed with glass cover in frame IP-65 protection mounted on MCPCB complete. Make Philips Cat Part No. BRP 410 LED091CW HO MRPC S2PSU GR or equivalvent in Bajaj, Havells, complete all as specified and directed by the Engr-in-Charge.

Cable junction box of size not more than 250x150x75 mm with 6 Amp MCB SPN and bus bar fixed along the wall/pole without removing and preparation of surfaces for painting externally. Painting the cable junction box complete externally by applying one coat of synthetic enamel paint of approved colour , complete all as specified and directed by the Engr-in-Charge.

S&F PVC cable 1.5 sqmm for controlling street light including fixing arrangments

S&F MCB single pole 5-32 Amp 240 Volt

S&P PVC insulated, armoured heavy duty electric cable with aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed for size 10 Sqmm 3 core laid in trenches/ducts, passing through pipes or along poles complete all as specified and directed by the Engr-in-Charge.

All as per above but size 4 Sqmm 3 core -ditto-

Sch 'A' Part - II (Credit Schedule) Rs.6850.00 as listed in Schedule of credit shall be deducted from BOQ amt while awarding of contract.

M/S BALI CONSTRUCTIONS

M/S B K ENTERPRISES