Pilibhit Bypass Marg par Barrier No.-2 se Bada Bypass tak sadak chaudikaran hetu prastavit divider par prakash vyavastha ki sthapana evam 05 varsh ka sanchalan evam anurakshan ka karya.

Part A Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P complete in all respect. (S.I. 21.2.9 PWD SHEDULE 2024)

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. (S.I. 21.3.1, PWD SHEDULE 2024)

Supply and fixing of LED Street Light, Fitting with mandatory with built driver set having die cast aluminium body with toughend glass/ UV stabilized PC Power and lenses Suitable for capcity of 150 Watt and Confinning to IP 66. and Ik07 and above Peoblection having Company LOGO. Engraved complete in all respect including Labour. 16800-18000 System lumens, Flight Power LED with lenses > 130 LM/W. PF>09.5. THE < 10% at Full load. GRI>70. Potted driver set in metal housing (Not Circuitory) Phase to Phase protection at <40 V &300V auto cut and re-start feature. Life time (LED Driver & electrical Circuit ary) of Moarthan 50000 Burning Hours with 70% of intial Lumen maintaned till life ends as per LM80 extrapolation IES TM-21-11 report. CCt 4000K/5700K. LM79 & LM80 Test report and all testing required. 4 KV intemal Surge Prolection, with 05 year Warrenty. (Philips, Havells, Bajaj, Surya or per repudiated manufacturer).Complete in all respects as per direction by Engineer in-charge.(Analyses Rate)

Supply and fixing of factory wired integral LED flood light luminies capcity of 200 Watt with die cast almunium housing with loughend glass/ LM/W>95, The <10%at Full load. CRI>70. Potted With build driver set in metal housing (Not Circuitory) (System lumen efficary >135 Im/Watt of Moartan 50000 Burning Hours CCT 5700K/6500K (As per ANSI Bin). Test report and all testing required for LED fixtures as per BIS shall be Submitted. Phase to Phase protection at <140 V &300V auto cut and re-start feature. 4 KV intemal Surge Prolection, with 05 year Warrenty (Philips, Havells, Bajaj, Surya or per repudiated manufacturer.).Complete in all respects as per direction by Engineer in-charge(Analyses Rate)

Supply and laying of almunium conductor PVC insulated aromoured served Sheathed cables 1100V grade in Existing RCC/Hime/Metal pipe as directed by Engineer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (S.I. 20b.1.9, 20b.1.12 LUCKNOW PWD SHEDULE 2024) 16 sqmm 4 Core

50 sqmm 3-1/2 Core

Supply and Wiring of submains with two nos. of 2.5 sq.mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. (S.I. 289, PWD SHEDULE 2018)

Trenchless boring with more than 2 mtr and upto 6mt below ground level by machine technology including laying of 11000 v HT cable 150mm Sqm to 400 sqmmm size with proper completion of the work. As per per direction of E/I. (Analysis Rate)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all aceesories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, Jointing etc.direct in ground(75cm below ground level), including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required. 63mm dia (OD-63 mm& ID-51 mm nominal (S.I. No. 15.16) CPWD/2025

Supply and laying of 25mm x 5mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bol, spring, washer etc. as required. (Jointing Shall be done by overlapping and with 2 sets of G.I. nit bolt & spring washer spaced at 50mm) complete in all respect. (S.I. 5.9, CPWD SHEDULE 2025)