CONVERSION OF GI CHARPOY NYLON NEWAR INTO GI CHARPOY WITH PLY TOP INCLUDING REPAIR / MAINT, PAINTING, POLISHING AND RECANNING OF FURNITURE ITEMS AT GE (AF) CHILODA

Amount

CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOP (Drawing No FD-220)

(a) Removing of unserviceable nylon newar and fixing with 12mm thick ply wood commercial BWR grade ISI marked make kit ply/century/Archid/National and fixing same with two nos of flat iron strip of size 900x32x5mm, bolts nuts and washers bolts of size 5x65mm 14 nos round head bolts after drlling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as specified and as directed by GE / Engr-in-charge.

Removing of unserviceable three way elbow of charpoi GI pipe and Replacement with nuts three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge.

Removing of unserviceable check nut of GI Charpoy and Replacement of new check nut 32mm bore 10mm thick suitable for charpoi GI pipe 32mm bore Med grade complete all as specified & directed.

Removing the threadless/broken long rails from chairpoy GI pipe 32mm and Replacement of new long rail of 32mm dia GI pipe medium grade 1.88 mtr long threaded at both ends and fixed to existing three way elbow 32mm dia and complete all shown on drawing.

Taking out existing old broken short rail from chairpoy GI and 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No (d) including threading on both ends complete fixing complete all as shown on drg. (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under rlevant items.)

Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 No new legs in position made out of old broken short rail obtained from taking down above item No (e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and two Nos MS clamp made out of 25x3mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel and complete all as specified and directed by GE/Engineer-in-Charge.

Taking out existing old broken legs from chairpoy GI 32mm dia and S&F new legs made out of 32 mm dia GI pipe medium grade including 3mm thickx40mm ms plate welded and bottom of legs and 02 Nos ms clamp made out of 25x3mm size Fi welded legs and threading on top end and painting of clamp with two coat of synthetic enamel paint over a coat of oxide primer and complete all as specified and directed by Enginer-in-Charge.

CHARPOY IP HARD TOP (Drawing No. FD/MAP-II/01)

Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked complete all as shown in Drg.

M&L for Painting of charpoy IP Hard top complete by removing existing paint with wire brush preparing the serface and applying two coat of spray painting so as to arrive at new look and as directed by GE Engr-in-charge .

REPAIR TO CHAIR CB STEEL WIITH / WITH OUT ARMS WITH PAINTING (Drawing No. FD-75(M) )

Removing unserviceable seats from steel chair with & w/o arms and Replacement 32mm thick IInd class hard wood seat back as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and 0.3 mm thick for seats and 3 to 3.2mm wide & 0.4mm thick border including supply of cane complete all as directed by Engineer in Charge.

Removing unserviceable seats from steel chair with & w/o arms and Replacement 32mm thick IInd class hard wood seat bottom as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and 0.3 mm thick for seats and 3 to 3.2mm wide & 0.4mm thick border including supply of cane complete all as directed by Engineer in Charge.

Taking out US arms rest from steel chair with arms and replacement of chair arms rest with suitable bolts, nuts and washer complete all as directed by Engineer in Charge.

Replacement of wornout hard rubber shoe black 20mm dia suitable for bottom of steel chair complete all as directed by Engineer in Charge.

Replacement of wornout hard rubber cap black 20mm dia at top of steel chair complete all as directed by Engineer in Charge.

M&L for Painting of Chair CB Steel With /Without Arms complete by removing existing paint with wire brush preparing the surface and applying two coat of spray painting so as to arrive at new look and as directed by GE/ Engr-in-charge .

REPAIR TO BED HARD PLY TOP (Drawing No. FD/E6/MAP/08 (R) )

Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked complete all as shown in Drg.

Removing of unserviceable 18/19 mm thick pre-laminated particle board of bed hard (Header Only) and replacement of new 18/19 thick pre- laminated paticle board of bed hard ply top ( header Only) as per shown in drg and directed by Engr -in-charge.

Removing of unserviceable 18/19 mm thick pre-laminated particle board of bed hard (Footer Only) and replacement of new 18/19 thick pre- laminated paticle board of bed hard ply top ( Footer Only) as per shown in drg and directed by Engr -in-charge.

Removing of unsv PVC Shoes of bed hard ply top and replacement of new pvc shoes of suitable size complete all as directed by Engineer in Charge.

REPAIR TO ALMIRAH MEDIUM STEEL WITH PAINTING (Drawing No. FD- 67 (M), 243, 340 & 1032 )

Removing of old unserviceable 3 way locking device complete of Almirah Med steel and replacement of new 3 way locking device made to shape as required and complete all as specified in drg and directed by Engr-in-charge.

Removing of existing old lock of Almirah Med steel and replacement of new lock of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-charge.

Removing of existing old unserviceable handle including necessary nut, bolts, washer etc of Almirah Med steel and replacement of new chromium plated handle including necessary nut, bolts, washer etc all as specified & directed by Engr- in- Charge

Removing of old unserviceable legs of Almirah Med steel and replacement of new legs made out of 1mm thick MS sheet made to shape and providing two coat of olive green or silver grey paint over a coat of red oxide primer complete all as shown on drawing and directed by Engineer-in-charge.

Removing of existing unserviceable shelves of Almirah med steel and replacement of new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer complete all as specified in drg and directed by Engr-in-charge.

M&L for painting of Almirah medium steel inside side and outside side complete by removing existing paint with wire brush preparing the surface and applying two coat of spray painting so as to arrive at new look and as directed by GE /Engr-in-charge .

REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH 1/2 HANGING 1/2 SHELF WITH PAINTING (Drawing No. FD - 67 (M), 1031,104 (M) & 1033, FD/E6/MAP/18 )

All as per Srl item No 5.01 here-in-before but Almirah 1/2 hanging 1/2 shelf (3 Way) Locking device

All as per Srl item No 5.02 here-in-before but Almirah 1/2 hanging 1/2 shelf (Lock) 5/6 leaver

All as per Srl item No 5.03 here-in-before but Almirah 1/2 hanging 1/2 shelf (Handle) steel plate

All as per Srl item No 5.04 here-in-before but Almirah 1/2 hanging 1/2 shelf (Legs)

All as per Srl item No 5.05 here-in-before but Almirah 1/2 hanging 1/2 shelf (Shelves)

M&L for Painting of Almirah Large steel inside and outside complete by removing existing paint with wire brush preparing the serface and applying two coat of spray painting synthetic enamei paintso as to arrive at new look and as directed by GE/Engr-in-charge .

RE-CANNING AND FIXING NEW PVC SEAT INCLUDING PAINTING OF CHAIR VERANDAH (Drawing No. FD-256 (FD/MAP-II / 06) )

Re-Canning with existing size of plastic cane complete with painting white color synthetic enamel paint complete all as directed by Engineer in Charge.

Replacement of old brocken PVC Seat with New PVC Seat bottom with painting of superior quaility of synthetic enamel paint complete all as directed by Engineer in Charge.

Replacement of old brocken PVC seat back with New PVC back with painting of superior quaility of synthetic enamel paint complete all as directed by Engineer in Charge.

Repair of Push Back chair (Branded Make Durian/Geeken/HOF/Methodex) as shown below :-

Repair and replacement of old unserviceable tapestry fabric with lamintion seat ply 4" thick cushion, 40 density with tapestry and fixing with new tapestry fabric with lamintion seat 4" thick cushion 40 density with tapestry cloth/synthetic cover.

Repair and replacement of old unserviceable tapestry fabric with lamintion seat Back Rest 4" thick cushion ,40 density with tapestry and fixing with new tapestry fabric with lamintion seat back rest 4" thick cushion 40 density with tapestry cloth.

Replacement of old unserviceable mechanism slider for auditorium chair with new mechanism slider for auditorium chair fitted.

Replacement of old unserviceable seat frame with new seat frame fitted.

Replacement of old unserviceable back frame with new back frame fitted.

Replacement of old unserviceable PU Arm rest complete fitted with new PU Arm rest.

Replacement of old unserviceable Spring tip off up with fitted new Spring tip off up.

Replacement of old unserviceable Push back spring with fitted new Push Back spring.

Navkar Enterprises