Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹67.5 L
EMD Value
₹68,000
Closing Date
19 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Deputy Municipal Commissioner
FURNITURE WORK OF ADMINISTRATIVE BUILDING AT DR.SHYAMAPRASAD MUKHERJEE ZOOLOGICAL GARDEN (SARTHANA NATURE PARK) IN NEW EAST ZONE (SARTHANA), SURAT.
350931
DMC/NEZ/10/2026-2027 Work No. 09
Open
Furniture/ Fixture
Works
Surat
3 documents required · 3 mandatory
₹2,832
Commissioner, Surat Municipal Corporation
₹68,000
3 Oct 2026
3 Oct 2026
3 Oct 2026
19 Oct 2026
3 Oct 2026
NAME OF WORK : FURNITURE WORK OF ADMINISTRATIVE BUILDING AT DR.SHYAMAPRASAD MUKHERJEE
ZOOLOGICAL GARDEN (SARTHANA NATURE PARK) IN NEW EAST (SARTHANA) ZONE, SURAT.
SR. NO. DESCRIPTION QUANTITY UNIT AMOUNT
Providing & fixing L- type table with table top would be 38mm
thick, made out 18mm Commercial Plywood. All outer surfaces to
be finished using 1mm thick laminate and bottom surface to be
finished with 1mm thick laminate as approved by architect.The
vertical support of table would be 18mm thick Commercial
Plywood. The surface would be finished using 1mm thick
laminate as approved by architect. Front of the table is made
using 18mm thick Commercial Plywood. Work Table Top Borded
and edged should be made valsadi teak wood borders with french
polish. It should have 2 nos. of drawer units made out of 12mm
thick Commercial Plywood on all side &12 mm thick Commercial
Plywood at bottom. It should have 2 shutters made out 18mm
thick Commercial Plywood. All Exterior surfaces of the table
would be finished in 1mm thick laminate & all internal surfaces
would be finished with 1mm thick laminate as approved by
architect. including all necessary hardware & fittings like screw,
lock, drawer channel, handle, key board tray, cable manager,
magnet, chain, foot rest etc. completed as per architect drawing &
Instructed By Site Engineer. Commercial Plywood Make-
(Echotech, Century, Green), Laminate Make- (Century, Green,
Royal Touch). (Basic rate:- Outer Laminate-1600 Rs/sqft & Inner
Laminate-560 Rs/sqft)
As Per Approved Rate of Health Centre For South East Zone
at D.T.P Scheme No.-69 (Godadra-Dindoli). F.P-R18, Surat -
Providing & Fixing Superitent & Assi. Veternary officer table
(Size:- 3.000m/2.400 x 0.900m x 750mm) with 18mm thick
Commercial Plywood with 1.0mm thick lamination sheet fitting
with ghana beading patti. Vertical support should be made by
Commercial Plywood & make 1 nos. drawers and shutter on one
side including keyboard try & cable manager with french polish
labour work with nescessary hardware etc. completed as per site
incharge instruction and as per details drawing. Commercial
Plywood Make- (Echotech, Century, Green), Laminate Make-
(Century, Green, Royal Touch)
As per SMC Approval Rate -
Providing, Making & Fixing Table of Size Required Size using
40mm MS pipe frame structure. All M.S frame structure should be
powder coated. The table top would be 38mm thick, made out
18mm commercial plywood. Work Table Top Borded and edged
should be made valsadi teak wood borders with french polish. All
outer surface to be finished using 1mm thick laminate & bottom
surface to be finished with 1mm thick as approved by architect
including with necessary hardware like screw, khilli, Pop up box,
table stud etc. completed as per site in charge instruction and as
per details drawing. Commercial Plywood Make- (Echotech,
Century, Green), Laminate Make- (Century, Green, Royal Touch)
(Size:- 2.000m x 0.900m x 0.750m) (Basic rate:- Laminate-1600
As Per Interior Work for Health Centre DTP Scheme 69. FP-18
SR. NO. DESCRIPTION QUANTITY UNIT AMOUNT
Providing & fixing Cupboard made out of 18mm commercial
plywood, the upper surface would be finished using 1mm thick
laminate and bottom surface would be finished using 1mm thick
laminate as approved by architect. Borded and edged should be
made valsadi teak wood borders with french polish.The vertical &
horizontal shelves are to be made with 18mm thick commercial
plywood. The surface would be finished using 1mm thick
laminate as approved by architect, 26mm thick cupboard
shutters are made using 18 mm thick commercial plywood
openable shutter with good quality handles including all
necessary premium quality hardware & fittings like screw,
4 buffer, hinges, handles, channels, stoppers, chains, bonding 64.00 SM 11,917.00
material etc. as per architect’s drawing & Instructed By Site
Engineer. (size: 2.100m x 0.900m x 0.450m) Commercial
Plywood Make- (Echotech, Century, Green), Laminate Make-
(Century, Green, Royal Touch). (Mode of Measurement: For
Measurement, Height of Storage * Length of Storage will be
Calculated) (Basic rate:- Outer Laminate-1600 Rs/sqft & Inner
Laminate-560 Rs/sqft)
As Per Approved Rate of Health Centre For South East Zone
at D.T.P Scheme No.-69 (Godadra-Dindoli). F.P-R18, Surat -
Storage Unit with table top would be 38mm thick, made out
18mm Commercial Plywood, central partition of 18mm. 20mm
thick shutters made with 18 mm thick, back side surface of the
unit is to be made with 12 mm thick , the outer surfaces would be
finished using 1mm thick laminate and all internal surfaces would
be finished using 1mm thick laminate as approved by architect.
Storage unit as per measurement from drawer and shutter side,
including all necessary premium quality hardware & fittings like
screw,bonding material, lock, drawer channel, handle,magnets,
chain etc. completed as per architect’s drawing & Instructed By
Site Engineer. Commercial Plywood Make- (Echotech, Century,
Green), Laminate Make- (Century, Green, Royal Touch).
As per Approved Rate of Library Interior For South East Zone
at D.T.P Scheme No.-62 (Dindoli-Bhedwad-Bhestan). F.P-R19, -
Providing & fixing L- type table (Size:- 1.800m x 1.600m x
1.050m) with table top would be 38mm thick, made out 18mm
Commercial Plywood. All outer surfaces to be finished using 1mm
thick laminate and bottom surface to be finished with 1mm thick
laminate as approved by architect.The vertical support of table
would be 18mm thick Commercial Plywood. The surface would
be finished using 1mm thick laminate as approved by architect.
Front of the table is made using 18mm thick Commercial
Plywood. It should have 2 nos. of drawer units made out of 12mm
thick Waterproof Commercial Plywood on all side &12 mm thick
Commercial Plywood at bottom. It should have 2 shutters made
out 18mm thick Commercial Plywood. All Exterior surfaces of the
table would be finished in 1mm thick laminate & all internal
surfaces would be finished with 1mm thick laminate as approved
by architect. including all necessary hardware & fittings like
screw, lock, drawer channel, handle, key board tray, cable
manager etc. completed as per architect drawing & Instructed By
Site Engineer. Commercial Plywood Make- (Echotech, Century,
Green), Laminate Make- (Century, Green, Royal Touch).
As per Approved rate of at D.T.P Scheme No. 62 (Dindoli-
Bhedwad-Bhestan), FP - 219, Surat
Providing & fixing Storage unit as per engineering In charge
SR. NO. DESCRIPTION QUANTITY UNIT AMOUNT
Personal Lockers: Providing & Fixing Readymade Locker Units
of Approved Brands (Nilkamal, Godereje Interio, Monarch Ergo,
Shilpa Classic or Eq.) having 15 Compartments made out of
SWG CRCA Sheets and Door Profile made out of 22 SWG CRCA
Sheets. The whole body shall be Powder Coated as per Colour
Selected by Architect. Each Locker Shall be of Size 31 cm W *
8 cm H * 38 mm D (Aprx.) and Shall have individual Locks with 2 5.00 Each 26,366.00
Set of Keys. The whole Unit shall be Fixed in the Place as per
Location Finalised by Architect and as per Direction of Engineer
As per Approved Rates of New ED-1 (Hospital Block) of
SMIMER Campus -
Providing and constructing sandwitch type Granite stone
platform 0.6 mt. wide & 0.75 mt. height, including one end side
granite stone (Double Polish) of 1.25 mt. height & front granite
stone patti of 10 cm wide, vertical partitions of half B.M. wall in
C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with
9 cement slurry as required and Stainless Steel sink of 0.45 mt x 3.00 Rmt 3,128.00
0.45 mt size of approved quality and make with required all
fitings & fixitures etc. comp as per instruction given by site in
charge at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)
SMC SOR IT no. 128 PAGE NO. 11 -
Below Granite Platform Shutter: Prov. & Fixing Laminated
shutter of Marble / wall storage shutter with 3"x1.5"
teakwood frame using with 18mm th. commercial plywood,
1mm th. laminate, teakwood edge biding, ss handles, hinges,
10 magnate, lock & necessary hardware, serews materials etc. 11.00 SM 5,000.00
complete as per instruction by engineer in charge.
Ref Rate From Renovation & Repairing of Furniture Works in
various Properties of Surat Municipal Corporation in West
Zone (Rander).(ITEM RATE TENDER) -
Prov. & Fix wooden Notice board with Righting laminate
board finish using 12mm th. Back commercial plywood
aprooved make, 01mm th. SF finish laminate, teakwood
framing & necessary hardware materials etc. inside and
liping french polish finish complete in all respects by
engineer in charge complete.
Ref Rate From Renovation & Repairing of Furniture Works in
various Properties of Surat Municipal Corporation in West
Zone (Rander).(ITEM RATE TENDER) -
SR. NO. DESCRIPTION QUANTITY UNIT AMOUNT
Providing and fixing of approved quality Roller blinds using
phifer fabric of premium grade, with roller tube, bottom bar
leveller made of extruded aluminium alloy an Idler, Insert Type-
Brackets, PVC chain etc. all complete at all floor and heights as per
approved specification. Roller Tube Control, Clutch, Idler Side by
side or single Roller Tube of extruded Aluminium 38mm inner
dia - 41mm outer dia minimum wall thickness of 1.6mm.
Roller blind - roller blind fabric should be made up of 35%
FibreGlass, 65% PVC, it should have specific low emissivity
treatment and lead free with Greenguard gold certification. It
should have 3% to 5% openness, fabric thickness should be
12 mm, mesh weight approx 400 gms/ sqmtr. It should cut UV rays, 195.00 SM 2,124.62
with antimicrobial properties preferably with Microban. The
fabirc should be Flame retardant and Lead Free. It should be
GreenGuard certified with Gold Standard for low chemical
emissions for indoor use. (Basic rate of Roller blinds-
rs/sq.ft.)including all accessories, material, labour,installation
etc..and complete the work satisfactorily as per instruction of
architect or Engineer-in charge..
Ref Rate from Valak Health Centre, East Zone-B -
Plain Gypsum Sheet Ceiling: Providing and fixing of Plain
Gypsum Sheet Ceiling using 80 mm. x 26 mm. x 0.50 mm. thick g.
i. Ceiling Sections, 15 mm. x 45 mm. x 15 mm. x 0.90 mm. thick
Intermediate Channels, 20 mm. x 28 mm. x 30 mm. x 0.50 mm.
thick Perimeter Channels and 25 mm. x 10 mm. x 0.50 mm thick
Ceiling Angles, as per IS 513 & 150 GSM Galvanised finish as per
IS 277, including 8 mm Dia. 45 mm long, Zinc coated, CR1 grade
Rawl Plugs, 27 mm x 37 mm x 25 mm x 1.60 mm thick Soffit
Cleats, 2.64 mm Dia. High Carbon Spring Steel Wire Connecting
Clip, confirming to IS 513, 12.50 mm Th. Tapered Edge Gypsum
Board Plain, conforming to IS 2095- Part 1: 2011 Certified
Boards, Screw Fixed to Ceiling Sections, using 25 mm Drywall
13 Screws [material-carbon steel EN-ISO 7049/50, finish-case 35.00 SM 800.00
hardened Grey Phosphating] at 230 mm c/c on Ceiling Sections &
150 mm at Periphery of Ceiling. Square and tapered Edges of the
boards shall be jointed and finished so as to have a flush look,
including filling and finishing with Jointing Compound,
conforming to ASTM C475, & Joint Paper Tape etc. complete with
all Material, Labour with all Lead, Lift and Transport and
complete the work satisfactorily as per instruction of Architect &
Engineer-in charge, as per "Architecture" detail.
As per Approved Rates of New ED-1 (Hospital Block) of
SMIMER Campus -
Acoustical Grid Ceiling: Providing & Fixing of 600 x
Armstrong, Optra Soft Fibre Acoustical Suspended Ceiling System
with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm
Exposed Grid. The tiles should have Humidity Resistance (RH) of
14 95%, NRC 0.9 -, Light Reflectance ≥85%, Colour White, Fire SM 3,262.00 -
Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module
size of 600 x 600 x 15mm.
Metal Rack: Providing and fixing of storage rack of angle slotted
type of size 2000 x 36”900 x 18” 460 with 6 shelfs(20 swg)
,including all hardware,colours,powder coating, channels, etc.and
complete the work satisfactorily as per instruction of architect or
Engineer-in charge.
SR. NO. DESCRIPTION QUANTITY UNIT AMOUNT
Ref Rate from Valak Health Centre, East Zone-B -
GANG CHAIR - 3 SEATER: Providing and fixing 3-seater gang
sitter with moulded foam, with Aluminium casting and metal
waterfall seats, PU 10mm thick pads on seat & back (chargeable),
P.C. frame & with perforation. as per architects selection,and
complete the work satisfactorily as per instruction of architect or
Engineer-in charge.BRANDS : COHUMAN , FEATERLITE
Ref Rate from Valak Health Centre, East Zone-B -
High Back Executive Chairs : Providing and Supplying highback
office chair of Aluminium dia cast base and armrest,50 density
high mould foam in seat and back, multi funtional mechenism,
bifma class IV gas lift and p.a castors. Liven HB Chair, Backrest
and headrest shell finish in high gloss black, Headrest height can
be adjusted, Armrest pad finish in polish finish, Armrest height
and width can be adjusted, backrest and seat cushion in single-
stitched semi-aniline artificial leather, Seat shell finish in high
gloss black, Seat depth and height of sitting can be adjusted,
Mechanism cover in silver smooth powder coating. as per
selection and complete the work satisfactorily as per instruction
of architect or Engineer-in charge. Brands: Bristol Liven, Como,
Couhman, Sunon, Featherlite, Steelcase, Amber Luxor, Hayworth
As per Approved Rates of SMC HQ -
MID BACK CHAIR FOR RECEPTION TABLE: Providing and fixing
of mid back office chair of good quality Curved fiber and nylon
body with adjustable lumber support, Reinforced mesh & knee
tilting mechanism, 4 way adjustable arms, 5 prong nylon base as
per selection and complete the work satisfactorily as per
instruction of architect or Engineer-in charge.Basic rate of chair is
2975/- per chair BRANDS : BRISTOL, COHUMAN STORM FIX
Ref Rate from Valak Health Centre, East Zone-B -
Plastic Chairs with Cusioning : Providing and sulppying plastic
chair with cusining of High-grade 100 percent virgin polymers
which ensure its longevity,Ergonomically designed plastic chair
for home with a lacquered finish, heavy-duty armrest, back and
seat cushion made up of velvet upholstery and PU material for
maximum comfort as per selection and complete the work
satisfactorily as per instruction of architect or Engineer-in
charge.Basic rate of chair is 2200/- per chair BRANDS :Supreme
Ref Rate from Valak Health Centre, East Zone-B -
Executive Sofas: Providing and fixing 3 - seater sofa sets, as per
drawings or selection using base White Ash Wood for framing
with molded foam, and high density foam warwick brand rexine
(as per architects selection) in sofa upholstery and Teak Wood
20 legs with 5 years warranty and instructions provided, and ,and -
complete the work satisfactorily as per instruction of architect or
Engineer-in charge. BASIC RATE : Rs. 7500 / R.FT.
(a) 2,700 mm L x 1,000 mm W Three-Seater Sofa 2.00 Each 79,500.00
(b) 2,000 mm L x 1,000 mm W Two-Seater Sofa 1.00 Each 59,360.00
(c) 1,200 mm L x 1,000 mm W One-Seater Sofa 1.00 Each 31,800.00
As per Approved Rates of New ED-1 (Hospital Block) of
SMIMER Campus -
SR. NO. DESCRIPTION QUANTITY UNIT AMOUNT
CENTER TABLE : Providing and fixing center table of brand as
per architects selection,and complete the work satisfactorily as
21 per instruction of architect or Engineer-in charge. 8.00 Each 5,750.00
As per Approved Rates of New ED-1 (Hospital Block) of
SMIMER Campus -
Outdoor Floor Mat: Providing and fixing outdoor floor matt of
brand comforts or as per selection and complete the work
22 satisfactorily as per instruction of architect or Engineer-in 4.00 No 2,995.76
charge.(basic size of matt is 1.80 x 1.20 mt)
Ref Rate from Valak Health Centre, East Zone-B -
Indoor Floor Mat: Providing and fixing indoor floor matt of
brand my floor or as per selection and complete the work
23 satisfactorily as per instruction of architect or Engineer-in 21.00 No 1,069.92
charge.(basic size of matt is 1.20 x 0.60 mt)
Ref Rate from Valak Health Centre, East Zone-B -
PVC Dustbin: Providing & Supplying of 8 to 10 in dia and 12 to
15 inc ht P.V.C. Dustbin of brand cello,pigeon etc. complete as
24 per selection & directed by the Architect and approved by the 21.00 No 855.93
Engineer in Charge.(BASIC RATE OF DUSTBIN IS RS 850/- )
Ref Rate from Valak Health Centre, East Zone-B -
S.S 304 Grade Dustbin: Providing & Supplying of S.S 304 GRADE
. Dustbin of brand SATYAKI,pigeon etc,having size of 10 In.
Diameter & 14" Height etc. complete as per selection & directed
25 by the Architect and approved by the Engineer in Charge.(BASIC 21.00 No 1,403.73
RATE OF DUSTBIN IS RS 1550/- )
Ref Rate from Valak Health Centre, East Zone-B -
Soft Board: Providing and fixing of soft board of size 1 x
Quartet White Frame Cork Board, Bulletin Display Board, Pin
Board, Lightweight Board for offices with backing of wood with
complete installation and mounting with other hardwares, waste
of materials etc and complete the work satisfactorily as per
instruction of architect or Engineer-in charge.
Ref Rate from Valak Health Centre, East Zone-B -
WOODEN PARTITION: Providing and fixing of full height solid
sandwitch partitions (AS PER DRAWINGS) using 50 x 50 mm
aluminium pipe for framing (minimum grid size of 600 mmx
600mm ), 12mm ply (both sides)of brand greenply ecotech
mr,century sainik mr,srg etc, teak wood beading patti etc. making
of rebates and including all hardware items, groove (if shown)50
MM TK , 24 kg density insulation if required,with all
materials,hardwares,ss or powdercoated screws, labour, lead and
wastage,scaffolding etc. complete. And Finished with different
materials,and complete the work satisfactorily as per instruction
of architect or Engineer-in charge.
Ref Rate from Valak Health Centre, East Zone-B
SR. NO. DESCRIPTION QUANTITY UNIT AMOUNT
ACCOUSTIC PANEL FINISH: Providing and fitting of acoustic
panels with Standard size & thickness of 1220*2420*9mm.of
brand Artois,smart pannel,senses akustik,trnaquil ,only.IN
GRADIENT PATTERN,including synth pf of 24kg density,Panels
should have Sound Absorption coefficient (NRC) 0.84.
Formaldehyde emission standards of GB18580-2001 class E1, it
should be a green material with asbestos-free, non-toxic and
tasteless gas under extreme temperature, protecting the ozone
layer, non-irritant and recyclable. acoustic panels have to be Fire-
resistant as per China standard class B1. Good insulation
properties, to prevent transmitting the heat from outdoor to
indoor directly as partition or and ceiling, saving 35% of energy,
extending the life of air conditioning.including all acceessories,
material,cutting work of approved finishing,adhesives,paint work
, labour etc. and complete the work satisfactorily as per
instruction of architect or Engineer-in charge.(Basic rate of
PANNEL-160 rs/sq.ft.)
Ref Rate from Valak Health Centre, East Zone-B -
Providing & fixing Aluminium Composite panel of Alum Decor,
Indobond & Flexibond make to all sufaces . 4mm thick in required
colours of exterior consisting of two layers of aluminium skins of
0.25mm thick sandwiching a thermo plastic core in continuous
lamination process with PVDF coating of exterior grades ensuring
long life colour and fungal resistance .Base frame work with
aluminium sections shall be fixed over the all surfaces,ACP shall
29 be fixed to the frame work as cladding it includes cost of labour 0.00 Sqft 220.00 -
,Materials ,accessories ,adhesive ,scaffolding ,wastages ,transport
taxes, fixing into a neat finish in aesthetic point of view, without
any undulations in facias all complete as per drawing and
instruction of engineer in-charge.(M.R)
TOTAL AMOUNT :-
TOTAL AMOUNT :-
EXECUTIVE ENGINEER,
NEW EAST (SARTHANA) ZONE
SIGNATURE OF CONTRACTOR SURAT MUNICIPAL CORPORATION
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Technical Bid PDF Admin Furn.pdf
Price Bid PDF Admin Furn.pdf
D128-01-INTERIOR LAYOUT_(SARTHANA)-Model.pdf
D128-02-INTERIOR LAYOUT_(SARTHANA)-Model.pdf
D128-03-INTERIOR LAYOUT_(SARTHANA)-Model.pdf
D128-04-INTERIOR LAYOUT_(SARTHANA)-Model.pdf
TECHNICAL BID PDF.pdf
CORRIGENDUM
NEW PRICE BID PDF.pdf
CORRIGENDUM
ADDENDA-CORRIGENDUM-1 PDF.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .