Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.8 L+₹9,118.85 (5.39%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹1.7 L
EMD Value
₹4,230
Closing Date
13 Mar 2024, 5:00 pmClosed
Assistant Executive Engineer Minor Irrigation subd
Office of the Assistant Executive Engineer Minor Irrigation subdivision Kollam
GENERAL Kurungal Ela P M Urgent maintenance of pump and motor in Kurungal LI station in Chathannoor Panchayath
2024_Irrig_666541_1
IRR/IA/5370/2023-2024
Open Tender
Civil Works - Others
Item Rate
90 days
Chathanoor
Please refer Tender documents.
9 documents required · 9 mandatory
₹555
₹4,230
6 Aug 2024
2 Mar 2024
16 Mar 2024
2 Mar 2024
13 Mar 2024
2 Mar 2024
Amount
Detailed Estimate
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
OD38072/2023-2024:Supplying good quality gear oil incliuding all cost etc complete as per the direction of department officer at site.
OD38073/2023-2024:Supplying good quality Gland Packing
OD38074/2023-2024:Supplying good quality packing grease including all cost of labour, conveyance etc complete as per the direction of officers at site.
OD38075/2023-2024:Supplying good quality transformer oil for starter including all cost, conveyance etc complete as per the direction of officer at site
OD38076/2023-2024:Supplying good quality of IR sheet for foot valve
OD38079/2023-2024:Setting 30HP pump and motor, suction and delivery pipe in position line and level ,providing IR Sheet in between joints of pipes including all cost of materialsexcluding IR sheet, labour charges etc complete as the direction from departmental officers at site
OD38070/2023-2024:Fabricating and erecting foot valve of size 250mm with 12mm MS plate flange plate, supporting plate with 12mm MS sheet including welding facing step cutting and providing 12mm MS nut and bolt etc and all other allied works including painting and convey to pump house and fitting to suction pipe and trail run etc as per the direction of officers at site.
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
13.65.1:Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD38362/2023-2024:Fabricating, supplying and fitting 75mm dia MS pipe (1.20m length) with end flange using 8mm thick MS plate including painting two coats synthetic enamel paint over a coat of iron primer,drilling holes including all cost, labour charges etc complete.
OD38363/2023-2024:Fabricating, supplying and fitting 250mm dia MS pipe (1.20m length) with end flange using 8mm thick MS plate including painting two coats synthetic enamel paint over a coat of iron primer,drilling holes including all cost, labour charges etc complete.
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
K J SIMON
Bidder Name
SREEKESHKUMAR
K J SIMON
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1035462.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .