Renovation of ASG floor and Maintenance of Windows in room no. 214

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and fixing 3M Make Scotchcal 7725 Series or equivalent series plain frosted film on glass partitions/surfaces, including surface cleaning, cutting to required size/pattern, and fixing by wet application method to obtain smooth, bubble-free finish with neat edges, complete with all materials, labour, tools, ladder, transportation and incidental charges, as per approved design and directions of Engineer-in-Charge. Measurement shall be taken for actual applied area in square metres. Make :3M Note : The work shall be carried out only by manufacturer approved applicator

Providing and fixing 3M Make Scotchcal 7725 Series or equivalent series approved design frosted film strips on glass partitions/surfaces, including cleaning of glass surface, cutting to required size/pattern, and fixing by wet application method to obtain smooth, bubble-free finish with neat edges, complete with all materials, labour, tools and incidental charges, as per manufacturer’s specifications and directions of Engineer-in-Charge. Measurement shall be taken for actual applied area in square metres. Make :3M Note : The work shall be carried out only by manufacturer approved applicator

Internal walls - Dr. Fixit Fastflex Providing and applying 1.2–1.5 mm thick (approx. 2.5 kg/sqm) two-component acrylic/polymer modified cementitious flexible waterproof coating (Dr. Fixit Fastflex) in two coats at mix ratio 1:1.4 (liquid:powder), on prepared surface after removing existing paint/plaster up to sound masonry by mechanical means, cleaning and brushing to remove loose particles, laitance and flaking material, including repairing damaged plaster with polymer modified cement mortar in 1:3 (cement:sand) admixed with Dr. Fixit Pidicrete URP @ 6-7.5 kg per 50 kg cement and 10 litres water per 50kg cement, along with grouting, bore packing and making good, applying first coat uniformly followed by second coat after 6–8 hours interval; the system shall be elastomeric and seamless with elongation ≥120% (ASTM D 412), crack bridging up to 2 mm (ASTM C 836), tensile strength ≥1.0 N/mm², resistance to 5 bar water pressure (BS EN 12390) and ≥90% reduction in chloride permeability (ASTM C1202), Curing for 3–5 days after second coat, complete as per manufacturer’s specifications including all materials, labour and incidental works. Note : The work shall be carried out only by a Dr. Fixit-approved waterproofing applicator