Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹7.9 L
EMD Value
₹15,833
Closing Date
25 Apr 2024, 3:00 pmClosed
Executive Engineer (Elect)
Room No 25,Ground floor, T.E. Building Kidwai Bhawan, Janpath
Providing electrical works of space allotted for CNO office at MDS Bhawan, Minto Road, MTNL, ND.
2024_MTNL_804349_1
EE(E)KBN/2024-25/19-04-24/04
Open Tender
Miscellaneous Services
Item Rate
30 days
Kidwai Bhawan
Please refer Tender documents.
10 documents required · 10 mandatory
₹590
Yes
MTNL Delhi
₹15,833
Yes
16 May 2024
19 Apr 2024
26 Apr 2024
19 Apr 2024
25 Apr 2024
19 Apr 2024
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C(WIRE MAKE :POLYCAB, HAVELS,KEI,FINOLEX)
Supplying and drawing following size of FRLS PVC insluated copper conductor, single core cable in existing surface / recessed steel/ PVC conduit/PVC chanel as required.Any Make(WIRE MAKE :POLYCAB/HAVELS/KEI/Finolex) a) 3 x 1.5 sqmm
b) 3 X 4 sqmm
c) 3X 6 sqmm
Supplying and fixing 25 mm dia PVC flexible pipe with all accessories etc complete as reqd
S/F following sizes / modules surface/recess mounting GI/PVC box along with modular base & cover plate for modular switches in recess/surface/wooden/ply board etc as reqd.(M/S Anchor/Havells/LEGRAND) make) a)3 module
b)8 Module
b) 12 module
S/F following modular switch / socket/Regulator on the existing modular plate & switch box including connections but exlcuding modular plate etc as reqd. ( ANCHOR,LEGRAND,L&T.) a) 5/6 amps switch
b) 15 / 16 amps switch
c) 5 pin 5 / 6 amps socket outlet
d) 6 pin 15 / 16 amps socket outlet
S/F HYLAM sheet to cover existing board i/c cutting fixing with screws as reqd.
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
SITC of energy efficient altera modern 595mm X 595 mm size led luminaire having following specification i/c deismantlign of existing outlived/ Faulty convention luminaire with brightness SMD LEDs , making suitable arrangement for installation etc complete as reqd. in all respected to the entire satisfaction of engineer – in –charge :-a) wattage 34 walts to 36 walt + 10% b) system luments efficacy : Note less than 100 Lumen per watt .( Make Havells Model no VENUSNE02X2PLR36W LED857 POTR )
Supplying & fixing the recessed mounting Ultra modern recess luminaire suitable for armstrong/grid/POP ceiling complete with separate electronic driver & high brightness SMD LEDs with 30 W ( 1 ft X 4 ft ) diffused type lighting system on the existing false ceiling with hanging arrangement i.e direct/by using chains ,fastner as per site requirement and minor adjustment, connections with proper connector from both sides in existing ceiling to accommodate the fitting as per the site requirement etc. complete as reqd.(Make: Havells /philips/Syska/Crompton/orient/Bajaj)
S/F 4 feet LED Batten fitting with integral electronic driver operated on 230 V 50 Hz AC Supply on surface with mounting arrangement connections etc. complete as required (System wattage 20-22 W system, lumen output-1850-2000 lumens etc.)(Make: Havells /philips/Syska/Crompton/orient/Bajaj)
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make- M/s L&T/Legrand/ABB/Havells a) 4 way (4 + 12), Double door
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator Make- M/s L&T/Legrand/ABB/Havells a)16 way, Double door
Supplying and fixing 5 A to 32/40 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make- M/s L&T/Legrand/ABB/Havells A) Single pole
b) Double pole (10 A to 40 A)
c) Four pole (63 Amp)
Supplying &Laying following ratingCopper conductor /Aluminium XLPE armoured power cable of 1.1 KV grade on wall / cable tray i/c connection etc. as required.Make-M/S Havells/Polycab/KEI/Finolex a) 3 1/2 x 35 Sq.mm.Copper
b 4 x 25 Sqmm Aluminium
c)3 1/2 X 95 Sqmm Aluminium
S/M end termination with brass compression gland & copper/aluminium lugs for following size XLPE / armoured power cable of 1.1 KV grade as required. A) 3 1/2 x 35 Sq.mm. Copper
B)4 x 50 Sqmm Copper
c) 4 x 25 Sqmm Aluminium
d)3 1/2 x 95 sqmm
S/F 4 core 50 sqmm flexible copper cable on wall/cable tray/cable duct i/c connection testing etc complete as reqd Make :-M/S Havells/Polycab/KEI/Finolex
P/F 6 SWG dia. GI wire on surface or in recess for loop earthing along with existing surface /recessed conduit/ submain / cable as required.
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) 100 A
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess/ wooden partions including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.Make-M/S AKG,BEC,MK (a)20 mm steel
(b)25 mm steel
Supplying installing of 50mmx16mm PVC batten with base and cover etc complete on wall /ceiling as reqd.(M/S AKG/SS make)
Dismantling and shifting of Electrical accessories,cables etc at present alloted room to electrical enquiry as per site requirement
Supplying and fixing 400 mm Sweep wall mounted fans suitable to work on single phase, 230 V, 50 Hz A.C Supply complete with blades, wire guard, built-in speed regulator including testing, commissioning etc. complete as required.(M/S Usha / Almonard/Crompton/Orient/Havells/Bajaj/Luminous/Kaithan make)
S/F 1200 mm sweep AC 230 volts single phase ceiling fan with all accessories including blades capacitor connection testing etc as reqd.(M/S Cromption /USHA/Orient/Bajaj/Luminous/kaithan/Crompton make)
Supplying & fixing of 24 Port Cat-6 Patch panel including 24 port switch and jack, RACK, PATCH CODE including connection testing and commissioning etc. complete as required.Make-M/s D LINK/HCL
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed conduit/partitions/ channel i/c numbering, marking, testing & commissioning etc. as required. Make-M/s D Link/Polycab/Havells/Finolex
Supplying and drawing of 2 pair 0.5mm dia. annealed copper conductor FRLS PVC insulated unarmoured telephone Cable in the existing surface/ recessed steel/ PVC conduit / partitions/ channel i/c numbering, marking, sign writing, making connections, testing & commissioning etc. as required Make-M/s D Link/Polycab/Havells/Finolex
S/F RJ 45/IO Modular type box with modular base plate & cover plate including 1 number RJ- 45 socket outlet i/c making data cable connections, 1 number twin RJ -11 socket outlet ( i.e. 2 nos. RJ-11 sockets in single outlet) i/c making telephone cable connections complete in all respect including numbering, Sign Writing, testing & commissioning etc. as required. Make- M/s ANCHOR /HAVELLS/D-LINK
Supply and fixing following size telephone MS krone box with krone plate, base etc. complete as required a)10 Pair Krone box complete with all accessories
S/F RJ-45 Connector on LAN cable by punching clipping, connection, marking, testing & commissioning etc. as required
S.I.T.C of indoor cubical type Wall/ Floor mounting Distribution panel suitable for 415 volts 3 phase 4 wire 50 Hz, AC supply system made out of 2mm M.S Sheet suitably bended and welded, separate housing for each MCCB, 300 Amp Aluminum busbar having fixing arrangement i/c powder coated, interconnection with suitable size of copper conductor wire / solid copper conductor with ferrul, lugs, crimping the lugs, Base channel, AL Earth bus-bar of size 25 X 5mm etc. complete as reqd. The panel shall incorporate of following and as per specification. INCOMMER:-(i). 1 No. 250 Amps 3 pole MCCB with 25 KA Breaking Capacity ( make : L&T) OUTGOING:- (i). 3 Nos :- 100Amp,18 KA 3 Pole MCCB ( L&T) ii) 3 Nos ;- 63 Amp TP MCCB ( L&T) iii) Pilot Lamp of 22.5 mm LED type for all three phase-1 set . (Make-L&T/ Seimens/ AE/ IMP/ Teknic/ Vaishno) (iv). Digital 96mmX96mm voltmeter (0-500) volts – 1 Set.( Make M/sL&T/AE/SYNTRON/TRINITY/ RISHABH) (v). 300 amps 4 strip alu, Bus bar,- 1 Set. (vi). 300/5 Amps C.T for sensing – 1 Set. (Make-M/s AE/KAPPA/ L&T)
Mahajan Sales Corporation
Star Electric Works
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .