Notified Area office Panoli

Excavation for foundation upto 1.5m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

directed by Engineer in charge from the end of the

cutting with all required lead and lift within the

Excavation for foundation from 1.5m to 3.0m

depth including sorting out and stacking of useful

materials and disposing off the excavated stuff

directed by Engineer in charge from the end of the

cutting with all required lead and lift within the

P/L PCC 1:3:6 (1-cement : 3 coarse sand : 6 M/c

stone aggregate 40mm nominal size) in foundation

concrete / floor concrete incl. machine mixing,

2 ramming, consolidation & curing etc. incl. cost of 515.00 2965.76 cum

form work if required etc. complete at all levels

(Cement make for all concrete work-

Ultratech,Hathi,Ambuja,J K laxmi)

Providing and casting in situ controlled cement

concrete M-250 for R.C.C. return as per drawings

including centering shuttering, scaffolding where

necessary, laying vibrating, curing and finishing

complete But excluding cost of reinforcement for

3 reinforced concrete work in foundation, footings, 971.00 4290.48 cum

base of columns and mass concrete CC M25 FOR

BASE (Only Fresh Play & Steel props shall be

(Cement make for all concrete work-

Ultratech,Hathi,Ambuja,J K laxmi)

Providing and casting in situ controlled cement

concrete M-250 for R.C.C. return as per drawings

including centering shuttering, scaffolding where

necessary, laying vibrating, curing and finishing

complete But excluding cost of reinforcement for

4 reinforced concrete work in foundation, footings, 769.00 7470.97 cum

base of columns and mass concrete CC M25 FOR

WALL (Only Fresh Play & Steel props shall be

(Cement make for all concrete work-

Ultratech,Hathi,Ambuja,J K laxmi)

Filling available excavated earth (excluding rock)

in trenches. Plinth, sides of foundation, etc. in

layers not exceeding 20 cm in depth condolidating

each diposited layer by rammimg and watering.

Providing TMT Bar fe 500D reinforcement for

RCC work including bending,binding and placing

6 in position complete up to floor two level 121800.00 76.21 kg

Tata,Kamdhenu,ET.Nilkanth,JSW,Utkarsh,Mono)

Demolition and disposal of unserviceable

7 936.00 1030.81 Cumtr

materials with all lead and lift. (ii) RCC Work

Suply of Factory made Precast Box Culvert &

Precast SWD units of Different Size. Product

should be confirming to IS Requirement, made by

using advanced precast technology having High

Perfomance Self Compacting Concrete of M-40

cylinder strenght using Fe500D reinforcement bar.

The Precast Box culvert should have special

provisions at appropriate location for mechanical

installation. The Rate are include all kindes of

Material, Joining bolts, labour and Transportation

factory to site of work and Taxation charges except

site unloading and installation.

Box Culvert 2000x 2000mm 16 39850.00 meter

Box Culvert 1000x 1000mm 216 16400.00 meter

Lowering, Laying & Installation of Factory made

9 precast Box Culvert & Precast SWD units with

cement mortar 1:3 of required size etc. complete

Box Culvert 2000x 2000mm 16 1500.00 meter

Box Culvert 1000x 1000mm 216 800.00 meter

GSB-Construction of granular sub-base by

providing & laying of compacted Grading 5th

Granular sub base (GSB) in layers of of graded

granular material consisting of machine cut black

trap stone aggregate as per grading - V given in

table 400-1 of the specification MORT&H and

compactor to the required density with vibratory

roller in all seasons as per MORT&H , maintaining

the required slope & grade during the operation as

approved by the engineer in charge & watering to

the proper moisture content and sprinkled with the

help of truck mounted water tank fitted with

suitable arrangement. (fully saturated having CBR

value minimum 30)

TOTAL Rs.