L062 Bhandari Gaon Maundari Paryan Motor Road Stage I and II

Earth work in hill road (hill side cutting):- Excavation in hilly area for construction of road in all types of soils, rocks & E&B etc. As met at site true to lines as per plan, L section cross slope, super elevation as required also including uprooting & cutting of bushes dressing of road surface to the required level and slopes with all lift & lead, required for safe disposal of surplus excavated material at suitable dumping places indicated in the drawing by mechanical means/ manual means and including construction of required coolie walling of minimum height of 0.60 mt with the stone available from the required hill side cutting for retaining of the muck , without damaging forest , forest land , utility and private properties ,including slip clearance and its safe disposal (same as per mentioned above for safe disposal of surplus excavated material ), till the completion of the work as per part II special conditions of contract , MORD Specification Clause 1601, 1602 & 1603 and as directed by Engineer-in-charge.

Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side complete as directed by the Engineer-in-charge.

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (For Super Elevation)

Construction of Embankment with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5(Ptrie Filling)

Stabilized Sub-Base: Providing, laying and spreading soil on a prepared sub-grade, pulverising, adding the designed quantityof cement and CCS to the spread soil, mixing in place with rotavator, grading with the Tractor mounted grader and compacting with the vibratory roller 80-100kN at OMC to achieve the desired unconfined compressive strength anD to form a layer of sub-base as per Technical Specification Clause 404. (For 3 per cent quantity of cement by weight of soil), (CCS: 75ml per cubic meter)

Stabilized Base: Providing, laying and spreading soil on a prepared sub-grade, pulverising, adding the designed quantity of cement and CCS to the spread soil, mixing in place with rotavator, grading with the Tractor mounted grader and compacting with the vibratory roller 80-100kN at OMC to achieve the desired unconfined compressive strength and to form a layer of base as per Technical Specification Clause 404. (For 4 per cent quantity of cement by weight of soil), (CCS: 125ml per cubic meter)

Prime Coat Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.