COMPREHENSIVE REPAIR INCLUDING DAY TO DAY MAINT FOR B/R AND E/M COMPLAINTS IN MD ACCN OF SHIKARGARH ENCLAVE UNDER THE AREA OF AGE B/R-II AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 02

Attending complaints of leaking / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as specified and directed by Engr-in-charge. Note: Major parts such as Spindles / phases of CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any shall be measured and paid for separately under respective item.

Attending complaints of leaking / unserviceable , low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as specified and directed by Engr-in-charge.

Attending complaints of internal water supply pipes,fittings and bottle traps for removing of blockages etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and directed by Engr-in-charge. Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. This item includes for labour part only for removal of blockages of air lock etc.

Checking and Attending to Carpenter work in repairs to Joinery ,(wooden/ steel/aluminium)of iron alumunium mongery , pelmet box ,door spring ,rooling shutter etc requring carpenter work and carrying out minor repair such as tighting of screw nails ,wire of false celling ,easening of joinery,door spring etc including replacement of glass panes,wire cloth to joinery or any defective items /materials complete all as specified and directed by Engr-in-charge.

Checking and Attending to welding work in repairs to steel windows, handles,door spring,iron frame of doors,rolling shutter garrages and other iron misc works, welding (run or spot welding as per site require maint) including replacement of defective items/material alongwith and including welding machine gloves ,welding glass welding rodany other tools required ,as per requirement complete all as specified and directed by Engr-in-charge.

S&F sheet glass ordinary quality 3.0 mm thick and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane including Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips fixed in repair complete all as specified and directed by Engr-in-charge.

S&F sheet glass ordinary quality 3.0 mm thick and glazing with alluminium beads in square but exceeding 0.5 sqm in each pane including Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips fixed in repair complete all as specified and directed by Engr-in-charge.

S&F sheet glass 3.0 mm thick frosted glass, pin headed type, in square n exc 0.5sqm each pane glazing with oil putty including Hacking out old broken glass from metal frames incl punching or drilling out old glazing pins or spring clips fixed in repair complete all as specified and directed by Engr-in-charge.

Re-securing glass of any description, thickness, size not exc 0.50 Sqm each pane in existing metal frames glazed with oil putty, incl removal of old putty, replacement of unserviceable glazing pins/ spring clips, securing glass with glazing pins and oil putty complete all as specified and directed by Engr-in-charge.

Resecuring/ re-fixing of wooden / PVC shutters of any description and size not exceeding 2.00 Sqm each including taking down (if reqd), easing and adjusting and refixing where ever required and fixing new steel screws complete all as specified and directed by Engr-in-charge.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Incl removal of old unserviceable wire cloth complete all as specified and directed by Engr-in-charge.

Dismantling boarding, any description, fixed in any position with nails or screws complete all as specified and directed by Engr-in-charge.

S&F prelaminated particle board interior grade 18/19 mm thick prelaminated one sides with decorative choice lamination as in kitchen cup boards, CB Shutters,, Shelves, partitions, any type of built-in-furniture etc. fixed with screws to timber frame work or with wooden gutties or with PVC Rawl plugs, fixed in repairs ccomplete all as specified and directed by Engr-in-charge.

S&F prelaminated particle board interior grade 18/19 mm thick prelaminated both sides with decorative choice lamination as in kitchen cup boards, CB Shutters,, Shelves, partitions, any type of built-in-furniture etc. fixed with screws to timber frame work or with wooden gutties or with PVC Rawl plugs, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F block board 18/19mm thick grade 2 quality, interier grade, commercial type, fixed with screws to timber frame work fixed in repairs complete all as specified and directed by Engr-in-charge.

M&L second class hard wood timber framed work ie; plain fillets square, rectangular or triangular in section, wrought, bullnosed, rounded or chamferred on one edge or face complete fixed in repairs complete all as specified and directed by Engr-in-charge.

Providing and fixing (WPC) Wood polymer composite sheet (WPC) Wood polymer composite coated Pre-laminated (one side decorative & other side balancing lamination sheet) density 600 kg/m3, frame of width 150mm & 18mm thickness made out of extruded 18mm WPC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using(WPC) Wood polymer composite fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, fixed in repairs complete all as specified and directed by Engr-in-charge.

S & F for Providing Kitchen Cabinet anti fungal,moisture resistence,anti borer,100% water Proof,flame retardant. in required sizes at site made out of 18mm thick 100% Solid WPC Plain board of required size 18mmthick(WPC) Wood polymer composite sheet & provision of shutters made out of 18 mm thick 100% Solid WPC Plain board all required brackets SS screws etc. fixed in repairs The panels shall be fabricatedusing adhesive and screws where ever required. complete all as specified and directed by Engr-in-charge.

S&F Self Closing (Auto)Hydrolic hinges, stainless steel, complete assembly fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc fixed in repairs complete to obtain smooth movement of the drawers. complete all as specified and directed by Engr-in-charge.

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished fixed in repair complete all as specified and directed by Engr-in-charge.

S&F drapery (Curtain) rod 20mm dia pipe mild steel powder coated/ PVC Coated fancy type with matching MS brackets of approved design with and incl one pair of Finale/ End Cups (All as per Sample) as in curtain rods fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F continuous (Piano) hinges width of flap 40 mm (when open) , mild steel, bright finish or electro galvanised fixed in repair. complete all as specified and directed by Engr-in-charge.

S&F mild steel sliding door bolts length 250mm, clip type/ bolt type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on clips and two on staple plate and fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F mild steel barrel tower bolts 200 mm long, stove enamalled black, with bright bolt supplied and fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F mild steel barrel tower bolts 150 mm long, stove enamalled black, with bright bolt supplied and fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F mild steel barrel tower bolts 100 mm long, stove enamalled black, with bright bolt supplied and fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F mild steel pressed handles 150mm size, oval type, stove enamelled black supplied and fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolts 200 mm long of extruded section fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolts 150 mm long of extruded section fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F aluminium anodized barrel tower bolts 100 mm long of extruded section fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F aluminium alloy anodized, sliding door bolts 250mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F in repair mild steel cold rolled, medium weight butt hinges100mm size fixed in repair complete all as specified and directed by Engr-in-charge.

S&F mortice Locks, cupboard, grade I, size 50mm brass with four levers fixed in repair complete all as specified and directed by Engr-in-charge.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 23cm wide with chromium plated bracket guard and railing complete all as specified and directed by Engr-in-charge.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150.00mm complete all as specified and directed by Engr-in-charge.

S&F in repair buffer stopper (Rubber) fixed with screw in wooden door complete all as specified and directed by Engr-in-charge.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 250 litres and not exc 500 litres complete all as specified and directed by Engr-in-charge.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 500 litres and not exc 1000 litres complete all as specified and directed by Engr-in-charge.

S&F in repair PVC covers for water tanks incl hingeing device & hasp and staple for locking of capacity 500 liters to 1000 liters tanks complete all as specified and directed by Engr-in-charge.

S&F PVC waste pipe 32 mm to 40 mm dia size with PVC adopter of length between 60 cm to 120 cm as per site requirement suitable for WHBs / Sinks / urinalsetc fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F in repair shower rose of 125mm with arm (195mm long with bend of 45 degree with flange) of Brass chromium plated shower rose with any colour for fixing with 15mm pipe complete all as specified and directed by Engr-in-charge.

S&F bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs i.e., incl taking down and removal of old unserviceable bib cock complete all as specified and directed by Engr-in-charge.

S&F bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F bib taps long body Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F two way bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F stop valves/ cocks cast copper alloy with crutch or butterfly handle, screwed down, screwed both ends for 15mm bore iron pipe or for unions complete fixed in repairs. complete all as specified and directed by Engr-in-charge.

S&F stop cocks Chromium plated brass/ cast copper alloy with capstain head screwed down, screwed both ends for 15mm bore iron pipe or for unions complete fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F in repair Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 20mm bore irone pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 25mm bore irone pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F angle cock with flange, cast copper alloy chromium plated with capstain head, fancy type screwed down high pressure, screwed for 15 mm bore iron pipe or for unions, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F in repair nipple suitable for HDPE Water tanks minimum weight 15mm -38grms complete all as specified and directed by Engr-in-charge.

S&F basin mixer (center hole) cast copper alloy chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed by Engr-in-charge.

S&F wall mixer (side Hole) telephonic with provn of flexible tube & hook cast copper alloy Chromium Plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed by Engr-in-charge.

S&F wall mounted sink mixer with brass casted spout for kitchen sink cast copper alloy chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs complete all as specified and directed.

S&F stop cock cast copper alloy cast copper alloy, chromium plated, screwed down high pressure, fancy type with long shank and cup (concealed type), screwed both ends for 15mm bore iron pipe or for union and fixed in repair complete all as specified and directed by Engr-in-charge.

S&F vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling with and incl a pair of suitable mild steel brackets, fixed all in repairs, including cutting for or pinning in and making good disturbed portion as reqd complete all as specified and directed by Engr-in-charge.

S&F Sink (Kitchen sink) made of Stainless steel 1.00mm thick with plugs, washers and PVC waste pipe & CP Waste 40mm/ 32mm size as approved incl bedding in cement mortar on to dwarf walls or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm with bowl size 410 x 330 x 160mm with drainage board fixed in repair incl removal of old unserviceable sink of any description & size complete all as specified and directed by Engr-in-charge.

S&F vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed in repair complete and making good the disturbed portion etc. complete all as specified and directed by Engr-in-charge.

S&F PVC valveless, syphonic action type flushing cistern, low level 10 ltr capicity Dual Flush Mechanic incl, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified incl taking down any type of flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed by Engr-in-charge.

S&F 600 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete and fixed in repair complete all as specified and directed by Engr-in-charge.

S&F 450 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete and fixed in repair complete all as specified and directed by Engr-in-charge.

S&F plastic water closer seat, white colour, closed pattern with flat or recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete fixed in repairs. complete all as specified and directed by Engr-in-charge.

S&F hinging device chromium plated for plastic water closet seat suitable for existing size and design fixed in repair complete all as specified and directed by Engr-in-charge.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site. complete all as specified and directed by Engr-in-charge.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-charge.

Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-charge.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-charge.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-charge.

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-charge.

Dismantling water tanks Exc 250 & n exc 500 and removing to store complete all as specified and directed by Engr-in-charge.

Dismantling water tanks Exc 500 & n exc 1000 and removing to store complete all as specified and directed by Engr-in-charge.

S&F in repair CP bottle traps 40mm bore dia complete all as specified and directed by Engr-in-charge.

S&F brass spindle / phase for 15mm dia CP wall mixer, CP WHB mixer, CP two way bib taps,CP bib cocks/ CP pillar cocks / CP angle cocks etc fixed in repair complete all as specified and directed by Engr-in-charge.

S&F Brass spindle / phase for 15mm dia CP concealed stop cocks etc fixed in repair complete all as specified and directed by Engr-in-charge.

S&F in repair PVC bath mirror cabinate box type with shutter of overall size 450mmx350mm complete all as specified and as directed by Engineer in charge.

S&F in repair deco door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc; complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store, complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store, complete all as specified and directed by Engr-in-charge.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store, complete all as specified and directed by Engr-in-charge.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting, complete all as specified and directed by Engr-in-charge.

S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates fixed in repair including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed by Engr-in-charge.

S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates fixed in repair including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed by Engr-in-charge.

M&L for cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified and directed by Engr-in-charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work, complete all as specified and directed by Engr-in-charge.

S&F of factory made 35 mm thick plain framed, panelled shutters (two panel) with 2nd class hard wood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, fixed in repair complete all as specified and directed by Engr-in-charge.

M&L for fabrication of aluminium powder coated window any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position, fixed in repair complete all as specified and directed by Engr-in-charge. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch 'A'.

S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repair complete all as specified and directed by Engr-in-charge.

S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing fixed in repair. Make : Rajshree Doors or equivalent as approved by GE. complete all as specified and directed by Engr-in-charge.

S&F of alluminium anodised handles 150 mm long fixed to windows, complete all as specified and directed by Engr-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, fixed in repair complete all as specified and directed by Engr-in-charge.

S&F of mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding, fixed in repair complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work), complete all as specified and directed by Engr-in-charge.

S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165), fixed in repair complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site complete all as specified and directed by Engr-in-charge.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:2:4) 25 mm thick Type B-1, using 20 mm graded stone aggregate as in floors in bed to receive top layer of tiles etc. complete all as specified and directed by Engr-in-charge.

M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding/ roof kerbs rounded or chamfered on edges coping etc; complete all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 with water proofing compound complete all as specified and directed by Engr-in-charge.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and directed by Engr-in-charge.

M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L for mirror polished machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and directed by Engr-in-charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and directed by Engr-in-charge.

M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction including demolition of existing cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and directed by Engr-in-charge.

¤  M&L for cement concrete type E-2, 1:5:10 (40mm graded crushed stone aggregat

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed.

Per compliant slip

Point

Point

Point

Point