Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹29.0 L+₹88,769 (3.16%)Rejected-AOC | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹32.4 L+₹4.3 L (15.4%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | BAPATLA | ANDHRA PRADESH | 504214 | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹32.5 L+₹4.5 L (16.0%)Rejected-AOC DOOR NO 44 19 10 RAILWAY NEW COLONY BEHIND SIVALAYAM VISAKHAPATNAM AP 530016 | VISAKHAPATANAM | ANDHRA PRADESH | 530016 | L4 | Rejected-AOC Not being L1 | |
| 5 | L5₹33.0 L+₹4.9 L (17.5%)Rejected-AOC DOOR NO 58 1 236 6 FLAT NO A 104 SAMPATH ENCLAVE NAD KOTHA ROAD VISAKHAPATNAM 530009 | VISAKHAPATANAM | ANDHRA PRADESH | 530009 | L5 | Rejected-AOC Not being L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
21 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
REPAIRS TO JOINERY AND OTHER CONNECTED WORKS UNDER AGE BR I OF GE ND VISAKHAPATNAM
2023_MES_607351_2
8245GEND
Open Tender
Civil Works
Item Rate
240 days
VISAKHAPATNAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ND VISAKHAPATNAM
₹60,000
2 Feb 2024
23 Sept 2023
26 Oct 2023
23 Sept 2023
21 Oct 2023
7 Oct 2023
Amount
The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to visit the site and see the buildings and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.
Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed
Taking down shutters of any description exceeding 1sqm but not exceeding 2 sqm complete all as specified and directed
Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frame complete all as specified and directed
Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frame complete all as specified and directed
Resecuring or easing & adjusting without taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed
Resecuring or easing & adjusting without taking down shutters of any description exc 1sqm but not exceeding 2 sqm complete all as specified and directed
Taking down shutters of any description not exc 1 sqm each and refixing in same opening complete all as specified and directed
Taking down shutters of any description exc 1sqm but not exceeding 2 sqm each and refixing in same opening complete all as specified and directed
S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe-290 Gde-E-165 complete all as specified and directed
M&L for Plain Cement Concrete Type C1 1:3:6 (using 20mm graded crushed granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed
S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed
S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc all as per clause 8.24 (b) of SSR Part I 2009 complete all as specified and directed
S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces all as per clause 8.24 (a) of SSR Part I 2009 complete all as specified and directed
S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc complete all as specified and directed
S&F factory made solid fixed ventilator of size of frame 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with 19 x 19 mm MS tube and 50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as per specification & drawing complete all as specified and directed
S/F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F butt hinges medium weight 100 mm long cold rolled mild steel complete all as specified and directed
S&F stainless steel butt hinges medium weight 100 mm long for PVC doors complete all as specified and directed
S&F in repairs butt hinges medium weight 100 mm long cold rolled mild steel complete all as specified and directed
S&F 75mm long medium weight MS butt hinges complete all as specified and directed
S&F in repairs 75mm long medium weight MS butt hinges complete all as specified and directed
S&F 100 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed
S&F in repairs 100 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed
S&F 100 mm aluminium handles, cast type anodised complete all as specified and directed
S&F in repairs 100 mm aluminium handles, cast type anodised complete all as specified and directed
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed
S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed
S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S & F in repairs 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed
S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed
S & F Aluminium plate type II Gate and shutter, hook & eye 150 mm size complete all as specified and directed
S & F in repairs Aluminium plate type II Gate and shutter, hook & eye 150 mm size complete all as specified and directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.
S& F in repairs rubber beading 50 mm wide and 5 mm thick complete all as specified and directed.
Carefully removal of existing grill from windows and refix in new window including necessary screws and fittings complete all as specified and directed.
S & F in repairs Aluminium anodised grill of make "Deco grill" and DG - 104 model with apperture of size 105 x99 mm, suitable ''F'' or ''E'' section fixed to window/ventilator frame for securing Deco grill and interlock and secruing the frame to masonry wall with brass screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S & F framed work such as grills grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290, Gde E-165 complete all as specified and as directed
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed
S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed
Hacking out old broken glass (any thickness size, quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.
S&F in repairs 20mm dia aluminium curtain rod with brackets etc complete all as specified and directed
S & F in repairs Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets matching to curtain rod of make as as approved by GE complete all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ]
S&F in repairs Plate racks made out of 0.8 mm thick .stainless steel,, ISI MARKED of size 750x600x 250 mm complete all as specified and directed
S&F in repairs door closer hydraulically regulated designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg of aluminium (Die cast body) complete all as specified and directed.
S&F in repairs for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and as directed.
S & F in repairs 18/19 mm thick ply wood, BWR, exterior grade, commercial type, fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc complete all as specified and as directed
S & F in repairs 0.8 to 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
S&F in repairs Steel cup board shutters Godrej pattern double shutters including frame made of 1 mm thick MS sheet including stiffeners, moulding, bending, welding, necessary fittings and locking arrangement as similar to steel cup board and two coats of spray painting of synthetic enamel paint over metal putty including preparation and primer and fixing to the existing concrete wall. (Approximate size of the cup board 90 cm x 190 cm measurement to be made in Sqm incl frame) and all as specified.
S&F in repairs Steel cup board shelves Godrej pattern made of 1 mm thick MS sheet including stiffeners, moulding, bending, welding, necessary fittings and two coats of spray painting of synthetic enamel paint over metal putty including preparation and primer incl fixing to the existing concrete wall complete all as specified and directed..
Taking down old steel cup board shutter and refixing in same opening after repair with necessary welding, moulding, necessary fittings and locking arrangements complete all as specified and directed
S&F Godrej locks Ultra XL + Twinbolt -1 CK satin nickel - inside or equivalent make approved by GE and removing old lock and make good of door lock hole with plywood /wood with putty complete all as per specified and directed
M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer using airless sprayer machine complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer using airless sprayer machine complete all as specified and directed.
Demolition of brick work built in cement mortar complete all as specified and directed
M&L for brick work with fly ash bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed
Taking down cement plaster on brick work, racking out joints, hacking for key scrubbing down with water etc and removing outside MD land complete all as specified and directed. .
M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed
M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing surface even and smooth without using extra cement with necessary safety measures i.e.scaffoldings / hanging platform complete all as specified and directed
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Supply only Water proofing compound of approved make complete all as specified and directed.
Preparing old decorated surfaces of ceilings by using vaccume based hand held or long handle sander machine and applying one coat of white wash complete all as specified and directed
M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and as directed.
M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and as directed.
Complete removal of existing treatment on wall and prepration of surface by using vaccume based hand held or long handle sander machine and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Prepration of old decorated surfaces by using vaccume based hand held or long handle sander machine and applying one coat of oil bound distemper by using auto roller or airless sprayer machiner complete all as specified and directed
Prepration of newly plastered surfaces by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Prepration of new plastered surfaces by using vaccume based hand held or long handle sander machine and applying a coat of chalk whiting to achieve even and smooth surfaces and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Preparing newly plastered surfaces of ceilings by using vaccume based hand held or long handle sander machine and applying Two coats of white wash complete all as specified and directed .
Complete removal of existing Treatment and Prepration of old surfaces by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Zinc rich epoxy primer to all steel surfaces as antirust agent and welding steel wire Fabric / Mesh of size 75X25mm of weight not less then 3.0KG per Sq.m to existing reinforcement, applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions and providing pressure Guniting averaging 30mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing surface rough and finally rendering 15 mm thick in Cement Mortar 1:4 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises out side MD land complete all as specified and directed.
M&L for non skid ceramic colour tiles of size 400 x 400 x 7/8 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and directed
M&L for non skid ceramic colour tiles of size 300 x 300 x 7/8 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and directed
M&L for coloured glazed ceramic tiles of size 350 x 450 x 7 to 9 mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing of 10mm thick in cement mortar 1:4 complete all as specified and directed
M&L for coloured designed chequered cement concrete tiles of any size 300x300mm and 22 to 25 mm thick with mixture of white & grey cement in equal proportions and no pigment as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for Providing and injecting chemical emulsion for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed
M&L for Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosine based solution) @ 0.5 litre per hole by drilling 6mm dia holes at downword angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed
Taking down existing unserviceable, rusted rolling shutter of any description of size n.exc 10 sqm each (opening size) push pull or manual type including taking out all unserviceable rusted, decayed parts, portions by cutting and repairing / replacement of defective parts/portion of shutter guide channel, anchorage rod, hood cover, locking plate, profiles, springs, pulley etc. hanging and refixing in the same opening by maintaining proper alignment and greasing welding to moveable parts of shutter and providing two coat of synthetic enamel paint over one coat of red oxide primer to all parts and position before refixing complete all as specified & as directed. (Note : Cost of new replaced parts if any shall be supply only to be measured separately under relevent items).
Taking down existing unserviceable, rusted rolling shutter of any description of size exc 10 sqm each (opening size) gear operated type with chain wheel and hand chain and including fixing of lath 1.25mm thick ,including taking out all unserviceable rusted, decayed parts, portions by cutting and repairing / replacement of defective parts/portion of shutter guide channel, anchorage rod, hood cover, locking plate, profiles, springs, pulley etc. hanging and refixing in the same opening by maintaining proper alignment and greasing welding to moveable parts of shutter and providing two coat of synthetic enamel paint over one coat of red oxide primer to all parts and position before refixing complete all as specified & as directed. (Note : Cost of new replaced parts if any shall be supply only to be measured separately under relevent items).
Supply only axle / anchorage pipe 40mm dia MS black pipe heavy grade to size for full length (single piece)complete all as specified and directed
Supply only rolling hood cover 1.00mm thick MS sheet bend to shape cut to length with a coat of red oxide primer complete all as specified and directed.
Supply only MS locking plate of standard size and shape for rolling shutter of approve quality with a coat of red oxide zinc chrome primer febricated by MS sheet 3.15mm thick with MS angle iron 40x40x6mm at bottom including sliding bolts with arrangement of locking by pad lock and handle both 02 Nos at each conrner to be fitted both side by 20x6mm flat iron complete all as specified .
Supply only rolling shutter profile inter locking both section formed from cold rolled sheet strip 1.25mm thick single piece cut to length rebated with mild steel clips secured either ends minimum width of profile 75mm with and including applying a coat of red oxide zinc chrome primer complete all as specified and directed
Supply only wire spring of rolling shutters, 90mm dia and 450mm long, standard quality with MS wire not less than 8mm dia complete all as specified and directed.
Taking out old unserviceable guide channel from existing position of rolling shutters and S&F of new MS guide channel 25mm wide and 65mm depth, fixed with mild steel plate with and including providing PCC type B-1, 1:2:4 as in bed block and finishing distributed surface by cement mortar 1:4 as per existing surfaces one coat of red oxide zinc chrome primer to be applied on exposed surfaces and two coat of bituminous paint in contract with concrete/plaster surfaces before fixing of guide channel complete all as specified and directed.
Supply only pulley 40mm dia of approved made suitable for rolling shutters to be fitted in existing position complete all as specified and as directed.
Supply only ball bearing heavy duty suitable for 40mm bore MS axle/anchorage rod roller No.3206 or equivalent to suit proper functioning of rolling shutter complete all as specified and directed
sagar infra
M/S SRI VENKATA BHAVANI CONSTRUCTIONS
ANJALI ENTERPRISES
M/S EVEREST INFRA
MR ENTERPRISES
S R CONSTRUCTIONS
S A R CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .