REPAIRS/MAINT TO INTERNAL ELECTRIFICATION, REPAIRS/ MAINT/ SERVICING TO VARIOUS TYPES OF FANS AND GEYSER AND REPAIRS/ MAINT/ SERVICING TO COOLING APPLIENCES AT ALONG MIL STN UNDER GE 872 EWS

Amount

REPAIRS & MAINT TO INTERNAL ELECTRIFICATIONS

M&L Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets (but excluding Light Fittings of any descrip-tion), etc, Making Good Disturbed Surfaces of Walls/Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wher-ever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down/out Unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including providing Surface Treatment to match the Existing Treatment/ Finishes on Ground, complete all as specified and as directed.

M&L Taking down Unserviceable Service Connection Cable with Suspension Wire of any description from any Situation, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accom-modating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accom-modating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE BELL/ BUZZER POINT controlled by One Bell Push on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 6 AMP 5 PIN SOCKET OUTLET POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 6 AMP, 3/5 PIN SOCKET POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 6/16 AMP, 3/5 PIN SOCKET POINT on INDEPENDENT BOARD, complete all as specified and all as directed.

M&L Point Wiring with 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3 PIN SOCKET 16 AMP POINT on INDEPENDENT BOARD, complete all as specified and all as directed.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping will deemed to be included in the Quoted Unit Rate and the same also Measured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wire required for looping, etc. as ordered will deemed to be included in the Quoted UNIT RATE.

S&F PVC Casing Capping of Size 25mm, ISI Marked, including all Fitting/ Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. including Taking down/ out Unservice- able PVC Casing Capping, complete all as specified and as directed.

S&F PVC Casing Capping (ISI Marked) of Size 32mm including all Fitting/ Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. including Taking down/ out Unservice-able PVC Casing Capping, complete all as specified and as directed.

S&F PVC Conduit of Size 25mm (External Dia), ISI Marked, including all Fitting/ Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. including Taking down/ out Unserviceable PVC Conduit, complete all as specified and as directed.

S&F Rigid Non-metallic PVC Conduit of Size 40mm (External Dia), ISI Marked, Exclusive of Boxes (Junction/ Terminal) but inclusive of all Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends and Fixing Accessories such as Couplers, Lock Nuts, Saddles, Pipe Hooks, etc. including Taking down/ out Unserviceable PVC Conduit, complete all as specified and as directed.

S&F PVC Rectangular Block of Size 100x100x50mm deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out Unserviceable PVC Block, complete all as specified and as directed.

S&F PVC Rectangular Block of Size 200x150x50mm deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out Unserviceable PVC Block, complete all as specified and as directed.

S&F PVC Rectangular Block of Size 250x200x50mm deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out Unserviceable PVC Block, complete all as specified and as directed.

S&F PVC Rectangular Block of Size 350x300x50mm deep with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out Unserviceable PVC Block, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Switch Piano, complete all as specified and as directed.

S&F Switch Piano Flush type, 16 Amp, Single Pole, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Piano Flush type, 16 Amp, Single Pole, 1-way, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Switch Piano, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Socket Outlet, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Socket Outlet, complete all as specified and as directed.

S&F Socket Outlet 16 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Socket Outlet 16 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Socket Outlet, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp, 3 Pin, 3-in-1, Multi-Plug, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp, 3 Pin, 3-in-1, Multi-Plug, Flush type, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Switch Socket Combination, complete all as specified and as directed.

S&F Lamp/ Angle Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and Connecting up including Taking down/out Unserviceable Holder, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm, 3 Terminal suitable for 230 Volt AC, 6 Amp and Connecting up, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm, 3 Terminal suitable for 230 Volt AC, 6 Amp and Connecting up including Taking down/ out Unserviceable Ceiling Rose, complete all as specified and as directed.

S&F Ceiling Fan Regulator 230 Volt AC, Rotary Stepped Electronic type 120/280 Volt and Connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator 230 Volt AC, Rotary Stepped Electronic type 120/280 Volt and Connecting up including Taking down/ out Unserviceable Fan Regulator, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Dimmar Switch type, 230 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and Connecting up including Taking down/ out Unserviceable Fan Regulator, complete all as specified and as directed.

S&F Bell Push 6 Amp, Single Pole, Flush Type 230/240 Volt AC for operating Bell/ Buzzer and Connecting up, complete all as specified and as directed.

S&F Bell Push 6 Amp, Single Pole, Flush Type 230/240 Volt AC for operating Bell/ Buzzer and Connecting up including Taking down/ out Unserviceable Bell Push, complete all as specified and as directed.

S&F Bell Ding Dong, Single Pole, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Bell Ding Dong, Single Pole, 230 Volt AC and Connecting up including Taking down/out Unserviceable Bell, complete all as specified and as directed.

S&F Modular Switch 6 Amp, 1-Module, Single Pole, 1-way, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Switch, complete all as specified and as directed.

S&F Modular Switch 16 Amp, 1-Module, Single Pole, 1-way, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Switch, complete all as specified and as directed.

S&F Modular Socket Outlet 6 Amp, 2-Modules, 2/3 Pin, Single Pole, Multi-purpose, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Socket Outlet, complete all as specified and as directed.

S&F Modular Socket Outlet 6/16 Amp, 2-Modules, 2/3 Pin, Single Pole, Multi-purpose, 230 Volt AC and Connecting up including Taking down/ out Unserviceable Socket Outlet, complete all as specified and as directed.

S&F Modular Fan Regulator, 2-Modules, Stepped type, 120 Watt suitable for Ceiling Fan 48"/56" and Connecting up including Taking down/ out Unserviceable Fan Regulator, complete all as specified and as directed.

S&F Modular Bell Push 6 Amp, 1-Module, Single Pole, Flush type, 230 Volt AC for operating Bell/ Buzzer and Connecting up including Taking down/ out Unserviceable Bell Push, complete all as specified and as directed.

S&F LED Driver, 8 Watt to12 Watt (as per Existing One/ as approved) and fixing to existing LED Light Fitting, Round/ Square and Connecting up including Taking down/ out Unserviceable Driver, complete all as specified and as directed.

S&F LED Driver, 18/20 Watt (as per Existing One/ as approved) and fixing to existing LED Light Fitting, Round/ Square and Connecting up including Taking down/out Unserviceable Driver, complete all as specified and as directed.

S&F LED Driver, 34 to 42 Watt (as per Existing One/ as approved) and fixing to existing LED Panel Light Fitting, 2'x2' Square and Connecting up including Taking down/out Unserviceable Driver, complete all as specified and as directed.

S&F LED Lamp 5 Watt, 230 Volt, Self-ballasted and fixing to existing Light Fitting including Taking down/out Unserviceable Lamp, complete all as specified and as directed.

S&F LED Lamp 7 Watt, 230 Volt, Self-ballasted and fixing to existing Light Fitting including Taking down/out Unserviceable Lamp, complete all as specified and as directed.

S&F LED Lamp 10 Watt, 230 Volt, Self-ballasted and fixing to existing Light Fitting including Taking down/out Unserviceable Lamp, complete all as specified and as directed.

S&F LED Lamp 15 Watt, 230 Volt, Self-ballasted and fixing to existing Light Fitting including Taking down/out Unserviceable Lamp, complete all as specified and as directed.

S&F LED Battern with Ultra Bright, Glass Shell, Glare Free, Wide Angle, Single Side connection for Retofit LED Tube with G13 Lamp Holders including Taking down/out Unserviceable Battern/Tube, complete all as specified and as directed.

S&F LED Tube Light 20 Watt with Single Side Connection, 6500K including Taking down/out Unserviceable Tube Light, complete all as specified and as directed.

S&F LED Light Fitting 1x12 Watt, Slim Surface Mounted, Round LED Panel Aluminum Die Cast Body with Premium Diffuser to ensure Glare Free and Even Distribution of Light, 230 Volt, Indoor Recess mounting Down Light Circular type with Reflector and Detachable Tray with LED Lamp, Electronic Driver, Connector Blocks, etc., complete with all Accessories, Pre-wired, Connecting up with and including suitable Size 2/3 Core Twisted Flexible Copper Conductor Cable including Taking down/out Unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Light Fitting 1x18 Watt, Slim Surface Mounted, Square LED Panel Aluminum Die Cast Body with Premium Diffuser to ensure Glare Free and Even Distribution of Light, 230 Volt, Indoor Recess mounting Down Light Circular type with Reflector and Detachable Tray with LED Lamp, Electronic Driver, Connector Blocks, etc., complete with all Accessories, Pre-wired, Connecting up with and including suitable Size 2/3 Core Twisted Flexible Copper Conductor Cable including Taking down/out Unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Tube Light Fitting 1x20 Watt with 20 Watt LED Strip and Driver having Aluminium Extruction Housing, complete with all Accessories, Pre-wired and connecting up with suitable Size 3 Core Twisted Flexible Copper Conductor Cable including Taking down/ out Unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Tube Light Fitting 1x20 Watt with 20 Watt Inverter LED Batten with Square Profile and Polycarbonate Channel. Lithium Ion Battery with Charging Time 8 Hours to 10 Hours and Back-up Time upto 4 Hours and Connecting up with suitable Size 3 Core Twisted Flexible Copper Conductor Cable including Taking down/out Unserviceable Light Fitting, complete all as specified and as directed.

S&F LED Luminaire 600x600 mm, 35/36 Watt, 220 Volt AC Recessed type with High efficiency PMMA Diffuser Soft Glare Free Light complete with Driver, Holders, LED Lamp suitable for Roof Ceiling, Connecting up with 3 Core Flexible Copper Conductor Cable of suitable Size including Taking down/ out Unserviceable Light Fitting, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'B' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole & Neutral, 'B' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB, complete all as specified and as directed.

S&F MCB 40 Amp, Single Pole & Neutral, 'B' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB, complete all as specified and as directed.

S&F MCB 40 Amp, Triple Pole & Neutral, 'B' Curve, 50 Hz, 10 kA, 415 Volt and Connecting up including Taking down/out Unserviceable MCB, complete all as specified and as directed.

S&F MCB 63 Amp, Triple Pole & Neutral, 'B' Curve, 50 Hz, 10 kA, 415 Volt and Connecting up including Taking down/out Unserviceable MCB, complete all as specified and as directed.

S&F Factory made Sheet Metal Enclosure for DB's when MCBs to be used SPN 2-way, 240 Volt AC, Single Door, Front Openable, IP-43 Protected, Epoxy Based Powder coated without Bus-bar and Connecting up including Taking down Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Factory made Sheet Metal Enclosure for DB's when MCBs to be used SPN 4-way, 240 Volt AC, Double Doors, Front Openable, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Factory made Sheet Metal Enclosure for DB's when MCBs to be used SPN 6-way, 240 Volt AC, Double Doors, Front Openable, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Factory made Sheet Metal Enclosure for DB's when MCBs to be used SPN 8-way, 240 Volt AC, Double Doors, Front Openable, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Factory made Vertical Sheet Metal Enclosure for DB's when MCBs to be used TPN 8-way, 415 Volt AC, Single Door, Front Openable, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, Heavy duty Cable with PVC insulated Stranded Aluminium Conductor Served with an inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and overall PVC Sheathed, Nominal Cross Section 6.0 Sqmm, 2 Core in Service Connections, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, Heavy duty Cable with PVC insulated Stranded Aluminium Conductor Served with an inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and overall PVC Sheathed, Nominal Cross Section 10 Sqmm, 2 Core in Service Connections, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, Heavy duty Cable with PVC insulated Stranded Aluminium Conductor Served with an inner Sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and overall PVC Sheathed, Nominal Cross Section 16 Sqmm, 2 Core in Service Connections, complete all as specified and as directed.

REPAIRS & MAINT TO FANS

M&L Taking down Unserviceable Ceiling Fan, Exhaust Fan, Wall Mounted Fan, Air Circulator Fan of any Make & Size after disconnecting and removing to AGE E/M Store Yard at ALONG for Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Re-hanging the same in Original Position after repaired and Providing Electric Connection, complete all as specified and as directed. NOTE :- (a) Any Minor Items and/or Any Repair Works involves to Make the Fan Functional, even if not notified by the Board of Officers, the same will be carried out by the Contractor without any Extra Cost to the Department. (b) Rewinding & Other Parts required to be replaced will be Measured and Paid separately as "S&F"/"M&L" under relevant Items here-in-after.

S&F Ball Bearing (Size as per existing one/ as approved) suitable for Ceiling Fan 1200/ 1400mm Sweep including Taking down/out Unserviceable Ball Bearing, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF

S&F Condenser 2.0/2.5 mfd suitable for Ceiling Fan & Wall Mounted Fan of any Make and Size including Taking down/out Unserviceable Condenser, complete all as specified and as directed. MAKE : AMCAP/ EPCOS/ HAVELLS

S&F Condenser 3.15/4.0 mfd suitable for Exhaust Fan/ Air Circulator Fan of any Make and Size including Taking down/out Unserviceable Condenser, complete all as specified and as directed. MAKE : AMCAP/ EPCOS/ HAVELLS

S&F Fan Blade Aluminium suitable for Ceiling Fan 1200mm Sweep of any Make/Model, Aero dynamically balanced and screwed with suitable Size Mild Steel Screws including Taking down/out Unserviceable Fan Blade, complete all as specified and as directed.

S&F Fan Blade Aluminium suitable for Ceiling Fan 1400mm Sweep of any Make/Model, Aero dynamically balanced and screwed with suitable Size Mild Steel Screws including Taking down/out Unserviceable Fan Blade, complete all as specified and as directed.

M&L Frame suitable for Exhaust Fan 380/400mm Sweep with Mild Steel Flat and fixing with Bolts, Nuts, Washers, etc. as required/ordered including Taking down/out Unserviceable Frame, complete all as specified and as directed.

M&L Grill, Spoke type (Sizes as per existing/ as approved) and fixing with Mild Steel Bolts, Nuts, etc. including Taking down/out Unserviceable Grill, complete all as specified and as directed.

S&F Gun Metal Bush (Size as per existing One/ as approved) suitable for Ceiling/ Exhaust/ Cabin Fan of any Make/Model and any Size including Taking down/out Unserviceable Bush, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF

M&L Louver Shutter suitable for Exhaust Fan 380mm Sweep of any Make/ Model, fixing with Bolts, Nuts, Washers, etc. and grouting to Brick/PCC Block Walls including Taking down/out Unserviceable Louver Shutter, complete all as specified and as directed.

M&L Louver Shutter suitable for Exhaust Fan 400mm Sweep of any Make/ Model, fixing with Bolts, Nuts, Washers, etc. and grouting to Brick/PCC Block Walls including Taking down/out Unserviceable Louver Shutter, complete all as specified and as directed.

M&L Mild Steel Down Rod 15mm Nominal dia and 18" long, Heavy duty, duly Painted to match the Colour of the Fan including Taking down/out Unserviceable Down Rod, complete all as specified and as directed.

M&L Mild Steel Down Rod 15mm Nominal dia and 24" long, Heavy duty, duly Painted to match the Colour of the Fan including Taking down/out Unserviceable Down Rod, complete all as specified and as directed.

M&L Mild Steel Down Rod 15mm Nominal dia and 36" long, Heavy duty, duly Painted to match the Colour of the Fan including Taking down/out Unserviceable Down Rod, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1200mm Sweep from AGE E/M Store Yard at ALONG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1400mm Sweep from AGE E/M Store Yard at ALONG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Exhaust Fan 300/380mm Sweep from AGE E/M Store Yard at ALONG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Wall/ Cabin Fan 400mm Sweep from AGE E/M Store Yard at ALONG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Pedestal Fan of any Sweep from AGE E/M Store Yard at ALONG to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Taking down Ceiling Fan of any Sweep from any Situation after disConnecting, Preparing old Painted Surfaces of Fan including Cleaning, Washing, Rubbing and Filling Cavities with Filler, applying One Coat of Synthetic Enamelled Paint (as approved) with Spray Painting Machine and Writing MES No. with Black Paint, Re-hanging the Fan in Original Postion & Re-Connecting and Testing, complete all as specified and as directed.

REPAIRS & MAINT TO WATER HEATER

M&L Taking down/Lowering Defective/ Unserviceable Electric Water Heater (Geyser) of any Capacity/ Make/ Type from any Height by disconnecting all Water and Electric Supply Connections, Opening & Checking in Presence of a Board of Officers to ascertain the quantum of Defects and Repair Works involves, Repairing/ Replacing of Unserviceable Accessories, Replacing of all Rusted Nuts, Bolts including Tightening of Nuts, Bolts, De-scaling Inner Tank & Inter Connection Assembly, Cleaning thoroughly with Diluted Acid, Brazing/ Gas Welding of Inter Connection Assembly, Checking of Inner Tank to make Fully Leakeage Proof and Testing the same with Water Filling/Air Pressure, Check & Maint of Thermostate Switch, Pressure/ Safety Valve Check & Connecting Earth Conti-nuity to Electric Water Heater, Re-fixing/ Re-mounting the same in Original Position and Providing all Water all Electric Supply Connections and Testing, complete all as specified and as directed. NOTE :- (a) Any Minor Items and/or Any Repair Works involves to Make the Water Heater (Geyser) Functional, even if not notified by the Board of Officers, the same will be carried out by the Contractor without any Extra Cost to the Department. (b) Unserviceable Parts need to be replaced will be Measured and Paid separately as "S&F" under relevant Items here-in-after.

S&F Base Assembly Gasket of any shape and Size, suitable for Electric Water Heater 25 Litre Capacity of any Make/Model including Taking down/out Unserviceable Base Assembly Gasket, complete all as specified and as directed.

S&F Base Assembly (Inner), Brass Chromium plated complete of any shape and Size with Inlet, Outlet, Thermostate Slot, drain plug, Clamp or Bolts to fixing Heating Element as existing Shape suitable for Electric Water Heater 25 Litre Capacity of any Make/Model including Taking down/out Unserviceable Base Assembly (Inner), complete all as specified and as directed.

S&F Brass Chromium plated Connection with Brass Chromium plated Adaptor 350mm long, making connection to in Inlet & Outlet suitable for Electric Water Heater 25/50 Litre Capacity of any Make/Model including Taking down/ out Unserviceable Connection with Adaptor, complete all as specified and as directed.

S&F Fusible Plug in existing Shape suitable for Electric Water Heater 25 Litre Capacity of any Make/Model and Testing including Taking down/out Unserviceable Fusible Plug, complete all as specified and as directed.

S&F Glass Wool (Insulation Materials) superior quality (as approved) suitable for Electric Water Heater 25 Litre Capacity of any Make/Model including Taking out Unserviceable Glass Wool, complete all as specified and as directed.

S&F Heating Element 1.5 KW 230 Volt AC suitable for Electric Water Heater 25 Litre Capacity of any Make/Model including Taking down/out Unserviceable Heating Element, complete all as specified and as directed. MAKE : BAJAJ/ DITZ/ POWER PACK/ THEETA

S&F Heating Element 2.0 KW 230 Volt AC suitable for Electric Water Heater 50 Litre Capacity of any Make/Model including Taking down/out Unserviceable Heating Element, complete all as specified and as directed. MAKE : BAJAJ/ DITZ/ POWER PACK/ THEETA

S&F Indication Lamp Assembly consisting Red & Green in Colour of any shape and Size, 230 Volt suitable for Electric Water Heater 50 Litre Capacity of any Make/Model including Taking down/out Unserviceable Indication Lamp, complete all as specified and as directed.

S&F Inner Shell (Inner Tank), ISI marked, made out of Copper Sheet 22 Gauge thick suitable for Electric Water Heater 25 Litre Capacity of any Make/Model in existing Shape & Size including Taking down/out Unserviceable Inner Shell, complete all as specified and as directed.

S&F Inner Shell (Inner Tank), ISI marked, made out of Stainless Steel Sheet 20 Gauge thick suitable for Electric Water Heater 25 Litre Capacity of any Make/ Model in existing Shape & Size including Taking down/out Unserviceable Inner Shell, complete all as specified and as directed.

S&F Outer Body complete with Top & Bottom Cover, Inspection Plate suitable for Electric Water Heater 25 Litre Capacity of any Make/Model and applying Two Coats of Synthetic Enamelled Paint (as approved) ove a coat of Red Oxide Zinc Chrome Primer with Spray Painting Machine including Taking down/out Unserviceable Outer Body, complete all as specified and as directed.

S&F Safety Valve, ISI marked suitable for Electric Water Heater 25 Litre Capacity of any Make/ Model including Taking down/out Unserviceable Safety Valve, complete all as specified and as directed.

S&F Thermostate Switch with Thermal Setting 40 °C to 90 °C Capacity and Relay 240 Volt AC suitable for Electric Water Heater 25/50 Litre capacity of any Make/Model including Taking down/out Unserviceable Thermostate Switch, complete all as specified and as directed.

M&L Taking down Electric Water Heater 25 Litre Capcity of any Make/ Model from the Existing Location after disconnecting all Connections, Cleaning Entire Body with Wire Brush for Removal of Old Paints, Making the Body Surfaces Smooth Finishing for Repainting, applying Two Coats of Synthetic Enamel Paint (as per existing Colour Code) over a coat of Red Oxide Zinc Chrome Primer including Removal of unwanted Paints from Glass & Rubber Items, Re-installation Electric Water Heater in Original Position, complete all as specified and as directed.

REPAIRS & MAINT TO AIR CONDITIONERS

M&L Taking down/ Lowering Defective Split AC 1.5 TR /2.0 TR Capacity of any Make from any Height by disconnecting all Electric Connections, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects & Repair Works involves, Repairing/Replacing of Unserviceable Parts, Cleaning thoroughly Condensing Unit to achive Proper Cooling effect, Checking of Electronic Circuit of Machine, Changing of Wiring with proper Size PVC insulated Copper Wires, Brazing the Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof, Re-install the Same in Original/ New Position and Providing Electric Connection, Testing on Completion, complete all as specified and as directed. NOTE :- (a) Any Minor Items and/or Any Repair Works involves to Make the Split AC 1.5 TR /2.0 TR Capacity Functional, even if not notified by the Board of Officers, the same will be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items here-in-after.

M&L Compressor Rotary type (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split AC 1.5 TR Capacity with All Accessories includ- ing necessary Gas Charging, Welding, Brazing to Stop Leakage & Testing including Taking down/ out Unserviceable Compressor, complete all as specified and as directed. MAKE : CARRIER/ HITACHI/ KIRLOSKAR/ TECUMSEH

M&L Compressor Rotary type (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split AC 2.0 TR Capacity with All Accessories includ-ing necessary Gas Charging, Welding, Brazing to Stop Leakage & Testing including Taking down/ out Unserviceable Compressor, complete all as specified and as directed. MAKE : CARRIER/ HITACHI/ KIRLOSKAR/ TECUMSEH

M&L Condensor Fan Blade Assembly, Heavy duty for Fan Motor (as per Existing One/ as approved) suitable for Split type AC 1.5 TR/ 2.0 TR Capacity, Providing Connection & Testing including Taking down/ out Unserviceable Condensor Fan Blade Assembly, complete all as specified and as directed. MAKE : CARRIER/ FEDDERS LLOYED/ VOLTAS

M&L Copper Pipe 1/2" (as per Existing One/ as approved) to match the Same Model & Capacity AC with necessary Connection & Testing including Taking down/ out Unserviceable Pipe, complete all as specified and as directed.

M&L Copper Pipe 3/8" & 5/8" (as per Existing One/ as approved) to match the Same Model & Capacity AC with necessary Connection& Testing including Taking down/ out Unserviceable Pipe, complete all as specified and as directed.

M&L Insulation On & Around Suction and Discharge Copper Piping with 6.0mm thick Flexible Thermocool Heat Resistant duly scrapped with Sticking Tape & Testing include-ing Taking down/ out Unserviceable Insulation, complete all as specified and as directed.

M&L Flare Nut made out of Brass for Copper pipe 1/2" & 3/8" (as per Existing One/ as approved) including Taking down/ out Unserviceable Nut, complete all as specified and as directed.

M&L Indoor Motor, Single Phase, 230 Volt (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split type AC 1.5 TR /2.0 TR Capacity, Providing Connection & Testing including Taking down/ out Unserviceable Condensor Fan Blade Assembly, complete all as specified and as directed. MAKE : AUE/ USHA or equivalent as approved by GE

M&L Outdoor Motor, Single Phase, 230 Volt (as per Existing One/ as approved) to match the Same Model & Capacity suitable for Split type AC 1.5 TR/ 2.0 TR Capacity, Providing Connection & Testing including Taking down/ out Unserviceable Condensor Fan Blade Assembly, complete all as specified and as directed. MAKE : AUE/ USHA or equivalent as approved by GE

M&L PCB (Power Circuit Board) suitable for Split type AC 1.5 TR Capacity (as per Existing One/ as approved), Providing Connections & Testing including Taking down/out Unserviceable PCB, complete all as specified and as directed.

M&L PCB (Power Circuit Board) suitable for Split type AC 2.0 TR Capacity (as per Existing One/ as approved), Providing Connections & Testing including Taking down/out Unserviceable PCB, complete all as specified and as directed.

M&L Sensor Set Dry Cool (as per Existing One/ as approved) suitable for Split type AC 1.5/2.0 TR Capacity, Providing Connections & Testing including Taking down/out Unserviceable Sensor Set, complete all as specified and as directed.

M&L Complete Servicing Indoor & Outer Unit of Split type AC 1.5 TR /2.0 TR Capacity of any Make & Model in Situ by Cleaning including Changing of Air Filter in Indoor Unit and Testing, complete all as specified and as directed. NOTE: Any Minor Items if required on Servicing to make the Split type AC Functional, the same will be provided by the Contractor without any Extra Cost to the Department.

Supply & Charging Gas F-22 to Split type Air Conditioner 2.0 TR Capacity including necessary Servicing, Brazing to Stop the Leakage of required Pressure & Testing, complete all as specified and as directed.

M&L Shifting Split type AC 1.5 TR /2.0 TR Capacity Outer Unit with All Accessories including necessary Gas Charging, Welding, Brazing to Stop Leakage Vacum Test Pressure, Testing, insisting thick Flexible Thermocool and Servicing of Indoor and Outdoor Unit, complete all as specified and as directed.

REPAIRS & MAINT TO REFRIGERATORS

M&L Opening Defective Refrigerator of any Capacity/ Make/Model/ Type, Removal of Blockage by Flushing out, Brazing (as required) and making the System Fully Leakeage Proof, Replacing Unserviceable Compressor & Other Parts and Re-assembling after necessary repaired and Testing, complete all as specified and as directed. NOTE :- (a) Any Minor Items and/or Any Repair Works involves to Make the Refrigerator Functional, even if not notified by JE/ Engineer-in-Charge, the same will be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items here-in-after.

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity, Providing necessary Connections & Testing includ-ing Taking down/out Unserviceable Compressor, complete all as specified and as directed MAKE : KIRLOSKER/ TECHUMSHEH/ WHIRLPOOL

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved) suitable for Refrigerator 286/ 310 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Compressor, complete all as specified and as directed. MAKE : KIRLOSKER/ TECHUMSHEH/ WHIRLPOOL

M&L Door Gasket, Magnetic type (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity including Taking down/ out Unserviceable Door Gasket, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L Door Gasket, Magnetic type (as per Existing One/ as approved) suitable for Refrigerator 286/ 310 Litre Capacity including Taking down/ out Unserviceable Door Gasket, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L Freeze Assembly Complete (as per Existing One/ as approved) suitable for Refriger-ator 255 Litre Capacity, Providing necessary Connections & Testing including Taking down/out Unserviceable Freeze Assembly, complete all as specified and as directed

M&L Freeze Assembly Complete (as per Existing One/ as approved) suitable for Refrigerator 286/ 310 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Freeze Assembly, complete all as specified and as directed.

M&L Over Load Protector 1/6 HP Capacity (as per Existing One/ as approved) suitable for Refrigerator of any Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Over Load Protector, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L Over Load Protector 1/8 HP Capacity (as per Existing One/ as approved) suitable for Refrigerator of any Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Over Load Protector, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L Relay Open type, 1/6 HP (as per Existing One/ as approved) suitable for Refrigerator of any Capacity & Testing including Taking down/ out Unserviceable Relay, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L Relay Open type, 1/8 HP (as per Existing One/ as approved) suitable for Refrigerator of any Capacity & Testing including Taking down/ out Unserviceable Relay, complete all as specified and as directed. MAKE : HITECH/ RENUTRAL/ USHA

M&L Pigmy Lamp 15 Watt, 230 Volt AC (as per Existing One/ as approved) suitable for Refrigerator of any Capacity & Testing including Taking down/ out Unserviceable Lamp, complete all as specified and as directed. MAKE : CROMPTON/ PHILIPS

M&L Power Circuit (PC) Plate (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Power Circuit (PC) Plate, complete all as specified and as directed.

M&L Power Circuit (PC) Plate (as per Existing One/ as approved) suitable for Refrigerator 286/ 310 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Power Circuit (PC) Plate, complete all as specified and as directed.

M&L PVC/Plastic Chilled Freezer Tray Complete (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity including Taking down/ out Unserviceable Chilled Freezer Tray, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L PVC/Plastic Chilled Freezer Tray Complete (as per Existing One/ as approved) suitable for Refrigerator 286/ 310 Litre Capacity including Taking down/ out Unserviceable Chilled Freezer Tray, complete all as specified and as complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L PVC/ Plastic Ice Tray, Superior quality of Large Size with PVC Separator Complete (as per Existing One/ as approved) suitable for Refrigerator of any Capacity, Providing necessary Connections including Taking down/ out Unserviceable Ice Tray, complete all as specified and as directed.

M&L PVC/ Plastic Vegetable Tray Complete (as per Existing One/ as approved) suitable for Refrigerator 255 Litre Capacity including Taking down/ out Unserviceable Vegetable Tray, complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L PVC/Plastic Vegetable Tray Complete (as per Existing One/as approved) suitable for Refrigerator 286/ 310 Litre Capacity including Taking down/out Unserviceable Vegetable Tray, complete all as specified and as directed. MAKE : KELVINATORS/ LG/ SAMSUNG

M&L Opening Defective Refrigerator 255 Litre Capacity of any Make/ Type, Removing Blockage by Flushing Out, Brazing (as required) to Stop Leakage, Replacing Unserviceable Liquid Line Filter including Supply & Re-charging with Freon-22 Refrigerant to obtain desired Cooling (Temperature) & Testing, complete all as specified and as directed.

M&L Opening Defective Refrigerator 286/310 Litre Capacity of any Make/ Type, Removing Blockage by Flushing Out, Brazing (as required) to Stop Leakage, Replacing Unserviceable Liquid Line Filter including Supply & Re-charging with Freon-22 Refrigerant to obtain desired Cooling (Temperature) & Testing, complete all as specified and as directed.

REPAIRS & MAINT TO WATER COOLER, DEEP FREEZERS

M&L Opening Defective Water Cooler of any Capacity/ Make/ Model/ Type for Checking/ Repairing, Removal of Blockage by Flushing Out, Brazing (as required) Suction & Discharge Pipes for Making the System Fully Leakeage Proof, Cleaning thoroughly Cooling Coil to achive Proper Cooling effect, Replacing unserviceable Compressor & Other Parts and Re-assembling after necessary repaired & Testing, complete all as specified and as directed. NOTE :- (a) Any Minor Items and/or Any Repair Works involves to Make the Water Cooler Functional, even if not notified by JE/ Engineer-in-Charge, the same will be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items here-in-after.

M&L Capacitor 10 mfd Capacity suitable for Water Cooler 40/80 Litre or 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Capacitor, complete all as specified and as directed. MAKE : ASAIN/ KEL/ SPEED/ UNISTAR

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved), Single Phase suitable for Water Cooler 40/80 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Compressor, complete all as specified and as directed. MAKE : KIRLOSKAR/ SHRIRAM/ TECHEMSHAH

M&L Compressor Unit Hermetically Sealed (as per Existing One/ as approved), Single Phase suitable for Water Cooler 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Compressor, complete all as specified and as directed. MAKE : KIRLOSKAR/ SHRIRAM/ TECHEMSHAH

M&L Fan Blade Assembly Complete, Heavy duty (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre & 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Fan Blade Assembly, complete all as specified and as directed. MAKE : SIDHWAL/ USHA/ VOLTAS

M&L Fan Motor 1/35 HP or 1/32 HP Capacity (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre & 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Fan Motor, complete all as specified and as directed. MAKE : AUE/ CROMPTON

M&L Over Load Protector 2613 (as per Existing One/ as approved) suitable for Water Cooler of any Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Over Load Protector, complete all as specified and as directed MAKE : HITACHI/ TECHEMSHAH

M&L Starting Capacitor 40/60 mfd suitable for Water Cooler 40/80 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Starting Capacitor, complete all as specified and as directed. MAKE : ASAIN/ EPCOS/ SPEED/ UNISTAR

M&L Starting Capacitor 80/100 mfd suitable for Water Cooler 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Starting Capacitor, complete all as specified and as directed. MAKE : ASAIN/ EPCOS/ SPEED/ UNISTAR

M&L Starting Kit comprising of Relay & Over Load Protector (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Starting Kit, complete all as specified and as directed. MAKE : RENUTRAL/ SHRIRAM

M&L Thermostatic Switch (as per Existing One/ as approved) suitable for Water Cooler 40/80 Litre & 60/120 Litre Capacity, Providing necessary Connections & Testing including Taking down/ out Unserviceable Thermostatic Switch, complete all as specified and as directed. MAKE : GODREJ/ INDOFOSS/ RENUTRAL

M&L Denting, Welding to Water Cooler 40/80 Litre Capacity including applying Two Coats of Synthetic Enameled Paint (1st quality/ grade) over a Coat of red Oxide Zinc Chrome Primer with Spray Painting Machine after necessary Preparation of Surfaces including Sencil Writing MES No. with Paint, complete all as specified and as directed.

Supply & Charging Gas F-12 to Water Cooler 40/80 Litre Capacity including necessary Servicing, Brazing to Stop the Leakage of required Pressure and Testing, complete all as specified and as directed.

M&L Opening Defective Deep Freezer of any Capacity/ Make/ Model/ Type Removal of Blockage by Flushing Out, Brazing (as required) Suction & Discharge Pipes for Making the System Fully Leakeage Proof, Cleaning thoroughly Cooling Coil to achive Proper Cooling effect, Checking of Electronic Circuit of Machine, Changing of Wiring with proper Size PVC insulated Copper Wires, Replacing unserviceable Compressor & Other Parts and Re-assembling after necessary repaired & Testing, complete all as specified and as directed. NOTE :- (a) Any Minor Items and/or Any Repair Works involves to Make the Deep Freezer Functional, even if not notified by JE/ Engineer-in-Charge, the same will be carried out by the Contractor without any Extra Cost to the Department. (b) Compressor & Other Parts and Charging of Refrigerent as required will be Measured and Paid separately as 'S&F'/ 'M&L' and 'Supply & Charging' under relevant Items here-in-after.

M&L Compressor Sealed Unit (as per existing One/ as approved) suitable for Deep Freezer 310/320 Litre Capacity of any Make/ Type Providing necessary Connections & Testing including Taking down/ out Unserviceable Compressor, complete all as specified and as directed. MAKE : EMERSON/ HITACHI/ KIRLOSKAR/ SHRIRAM/ TECHEMSHAH

M&L Complete Servicing Deep Freezer 280/310/320 Litre Capacity of any Make/ Type in Situ by Cleaning Condenser Unit, Fan Motor with Blade, Base Plate, etc. Complete Testing for Proper Functioning, achiving Proper Cooling effect including necessary Repairs to Deep Freezer and Testing, complete all as specified and as directed. NOTE : Any Minor Items required on Servicing to make the Deep Freezer Functional, the same will be provided by the Contractor without any Extra Cost to the Department.

Supply & Charging of Refrigerant F-22 to Deep Freezer 280/310/320 Litre Capacity of any Make/ Type after Cleaning of Condenser Unit, Evoporator Unit, Brazing to Stop the Leakage of Suction/ Discharge Tubes (as required) and Making the System Fully Leakeage Proof and Vaccuming and Testing, complete all as specified and as directed.

REPAIRS & MAINT TO VOLTAGE STABLIZERS & MISC ITEMS

M&L Dismantling Voltage Stabilizer 3.0 KVA Capacity, Single Phase, 240 Volt AC, Repairing as required, Replacing burnt Transformer Copper wounded, Electronic Circuit, Relays, Indicator Light, Voltmeter, Display, Switch & Socket, etc. to provide Correct Stabilised 130-240 Voltage, Re-assembling the Voltage Stabilizer after Repaired, Re-installed & Testing, complete all as specified and as directed. NOTE : Cost of All Materials & Labour Elements required for Making the Stabilizer Functional, will deemed to be included in the Quoted Unit Rate.

M&L Dismantling Voltage Stabilizer 5.0 KVA Capacity, Single Phase, 240 Volt AC, Repairing as required, Replacing burnt Transformer Copper wounded, Electronic Circuit, Relays, Indicator Light, Voltmeter, Display, Switch & Socket, etc. to provide Correct Stabilised 130-240 Voltage, Re-assembling the Voltage Stabilizer after Repaired, Re-installed & Testing, complete all as specified and as directed. NOTE : Cost of All Materials & Labour Elements required for Making the Stabilizer Functional, will deemed to be included in the Quoted Unit Rate.

S&F PVC insulated, Sheathed Flexible Copper Conductor Cable of Size 40/39, Multi-stranded, 1100 Volt grade and Providing Electric Connection including Taking down/ out Unserviceable Cable of any description, complete all as specified and as directed.

M&L PVC insulated, Sheathed Copper Conductor Cable of Size 40/0076, 3 Core, Multi-stranded, 1100 Volt grade (Colour White or Black) and Providing Electric Connection including Taking down/out Unserviceable Cable of any description, complete all as specified and as directed.

S&F PVC insulated, Sheathed, Multi-stranded, Flexible Copper Conductor Cable of Size 4.0 Sqmm, 3 Core, 1100 Volt grade and Providing Electric Connection including Taking down/ out Unserviceable Cable of any description, complete all as specified and as directed.

S&F Plug Top 6 Amp, 3 Pin, ISI marked, 230 Volt AC and Connecting up including Taking down/out Unserviceable Plug Top, complete all as specified and as directed.

S&F Plug Top 16 Amp, 3 Pin, ISI marked, 230 Volt AC and Connecting up including Taking down/out Unserviceable Plug Top, complete all as specified and as directed.

S&F Metal Clad Top 2 Pole & Earth 20 Amp, ISI marked and Connecting up including Taking down/out Unserviceable Metal Clad Top, complete all as specified and as directed.

S&F Factory made Sheet Metal Enclosure, Single Pole & Neutral, with 2 Pin & Earth Plug Top and Socket 20 Amp rating, IP-43 Protected with and including MCB 20 Amp to 32 Amp, Single Pole (1 No.) and Connecting up including Taking down/out Unservice-able Sheet Metal Enclosure, complete all as specified and as directed.

M&L Push Cock 15mm bore (dia) Brass Chromium plated, high pressure, screwed down for Socket/ Unions or GI Pipe including Taking down/ out Unserviceable Push Cock, complete all as specified and as directed. MAKE : JAINSON/ NIXON or equivalent as approved by GE

S&F PVC Connection in Inlet, 15mm bore (dia) and 450mm in length with PTMT Nuts suitable for Cold/Hot Water including Taking down/out Unserviceable PVC Connection, complete all as specified and as directed.

M&L PVC Drain Pipe 32mm bore (dia), Heavy duty of Length 1.00 Metre with 2 Nno. Galvanized Adjustable Clamps, Providing necessary Connections including Taking down/ out Unserviceable Drain Pipe, complete all as specified and as directed.

M&L PVC Float Valve Assembly 15mm bore (dia) comprising Valve Assembly, Aluminum Rod, PVC Ball, suitable Water Cooler/ Desert Cooler including Taking out/ down Unserviceable Float Valve Assembly, complete all as specified and as directed.

M/s PRABIR ENTERPRISE

FREEZCON