8816 RENOVATION, IMPROVEMENT TO CERTAIN OMQs, PROVN OF CERTAIN WORK SERVICES AT 29 ORP END OF RUNWAY AND PROVN OF ANTI-SUICIDE FAN RODS IN CERTAIN SMQs AT AF STATION, BAREILLY

Amount

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling, inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and as directed.

S & F of solid PVC Wall Lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site as per specification etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster

M&L for rendering 15mm thick in CM (1:6) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface, and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

S&F fancy type brass chromium plated tumbler holder complete all as directed. [Make: Cat No. AQN-7741 of Jaquar or equivalent in Grohe/ Kohler/ Cera/ Kajaria]

S&F fancy type brass chromium plated Towel Rack 600mm long with lower hangers fixed with CP brass screws and plastic cleats complete all as directed. [Make: Cat No. AQN-7781 of Jaquar or equivalent in Grohe/ Kohler/ Cera/ Kajaria]

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 10 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per item No. 10 herein before but point wiring with 2.5 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade duly earthed with same cable as for wiring above and green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

S&F wall/ surface mounted type LED light fitting 1 X 9 to 12 watt (2' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. [Cat. Part No. BN 021 LED12S 6500 PSU GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS10WLED 865SPCWH of make: Havells/ Cat No. LL20-111-XXX-65NE3 of make: Wipro]

S&F Wall mounted fan 400mm sweep, 230V, AC with built-in regulator and swing function including electric connection from ceiling rose to fan connector with PVC insulated 2 core copper cable of size 0.75 sq.mm complete. [Model. 'Swing' of make: Havells or equivalent in Almonard/ Bajaj/ Crompton]

S&F Heavy duty Exhaust fan 300mm sweep, single phase 230V AC, 900 RPM metal body with louvers including electric connection from ceiling rose to fan connector with PVC insulated 2 core copper cable of size 0.75 sq.mm complete all as directed. [Model. 'Turbo Force' of make: Havells or equivalent in Almonard/ Bajaj/ Crompton]

S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.

S&F single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts complete all as directed.

M&L for sub main wiring concealed complete with two runs of single core 4 sq.mm (nominal area) 1100 volt grade single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. including provision of earth continuity wire with same cable as for wiring but in green colour all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

M&L for sub main wiring concealed complete with two runs of single core 6 sq.mm (nominal area) 1100 volt grade single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. including provision of earth continuity wire with same cable as for wiring but in green colour all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

S&F sheet steel powder coated distribution board Vertical type TPN 4 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 43 protection and double door, suitable for mounting MCCB up to 160 Amps as incomer and MCBs as out going complete including grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Cat No. 5077 45 of make Legrand/ Cat No. DBVTH004DD of Make: L&T]

S&F MCCB 125 Amp, 415 volts, 4 pole, 16 KA, Thermal magnetic release for line protection etc complete all as specified and directed.

S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.

S&F MCB SPN, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.

S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.

Supply, lay, connect, test and commissioning of LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 3½ Core 120 Sq.mm complete all as specified and directed.

Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.

Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.

Supply and spreading river sand as in cushioning for UG cable all as specified in clause 19.75 of SSR Part I. [Note: Punned down thickness shall be considered for payment]

Supply and laying dry burnt bricks, sub class ‘B’ old size in cable trenches for cable protection complete all as specified and as directed by the Engineer-in-Charge.

Horizontal Boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes up to 80mm bore and making good the disturbed surface complete all as specified and as directed. [Note: GI pipe will be measured and paid separately]

Supply and laying GI pipe of 80mm bore dia light grade for cable protection, laid in trenches for drawing cables complete all as specified and as directed.

S&F switch piano, flush type 5/6 Amps, one way, 230V AC

S&F switch piano, flush type 15/16 Amps, one way, 230V AC

S&F socket outlet 2 in 1, 6 Amp, 5 pin, 230V AC

S&F socket outlet 2 in 1, 5/6 & 15/16 Amp, 6 pin 230V AC

S&F Angle Holder, insulated body with back plate with & including LED Lamp 9 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

S&F MCCB 250 Amp, 415 volts, 4 pole, 25 KA, Thermal magnetic release for line protection etc complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to 4mm dia GI earth continuity wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion.

Supply, install, testing & commissioning of split type air conditioner, wall mounted type, working on single phase, 240 volts, 50 Hz AC supply with cordless remote control unit, built-in air ionizer and plasma filter for better air quality with BEE 5 Star rating 1.5 TR complete with copper condenser coil including fixing of indoor and outdoor unit, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC drain pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable and plug top complete all as directed by Engineer-in-Charge. [Make: Model: 185V Vectra Prism of make Voltas or equivalent in O General/ Mitsubhishi Electric/ Hitachi/ Daikin/ Carrier]

Supply and install Voltage Stabilizer Copper wound for automatic operation boost/ buck, single phase naturally air cooled indoor floor/ wall mounted type & designed for input variation between 160 V to 260 V with output voltage stabilized at 230 V with accuracy of ± 2.5 % and of capacity 5 KVA complete all as specified and as directed by Engineer-in-Charge. Make:- M/s Chime Electronics, Delhi (Brand: Sinetrac)/ M/s Vintek Electronics, New Delhi (Brand: Volina)/ M/s Vinitec Electronic Laboratory, New Delhi

M&L for disconnecting and taking down existing ceiling fan of any sweep from its location, replacing the existing down rod with 300mm long anti-suicide ceiling fan down rod with inbuilt spring of existing colour, complete including refixing the fan in its original position and reconnecting all as directed. The down road shall be of zinc plated MS Pipe of thickness 1.84 (± 0.05) mm with zinc plated spring mechanism, MSME tested for 15 Kg weight bearing capacity and breaking at impact load of 22Kg+, the fan down rod opens from its center and spring hidden in pipe expands to land person on ground safely. Make: Gold Life Mfd by M/s Safe Solutions Industries, Mumbai or equivalent as approved by the GE

M&L for disconnecting and taking down existing ceiling fan of any sweep from its location, replacing the existing down rod with 450mm long anti-suicide ceiling fan down rod with inbuilt spring of existing colour, complete including refixing the fan in its original position and reconnecting all as directed. The down road shall be of zinc plated MS Pipe of thickness 1.84 (± 0.05) mm with zinc plated spring mechanism, MSME tested for 15 Kg weight bearing capacity and breaking at impact load of 22Kg+, the fan down rod opens from its center and spring hidden in pipe expands to land person on ground safely. Make: Gold Life Mfd by M/s Safe Solutions Industries, Mumbai or equivalent as approved by the GE

S&F PVC insulated three core flexible wire with copper conductor of size 0.50 sq.mm conforming to IS-434 from ceiling fan connector to ceiling rose complete all as specified and as directed.

S&F Modular Kitchen Chimney 60cm size, including PVC/ flexible pipes for exhaust, clamps, bends/ covers etc complete all as required working accessories, Electrical driven 230 Volts, 50 Hz, Single phase with Matt black finish and curved with tempered glass along with touch controls with digital display, Auto clean technology, heavy duty baffle filter, front black glass panel and LED lights with Air flow not less than 1100 m³/ Hr, 150mm air outlet dia, with low noise level of 59 dBA (Max) complete with all accessories and fittings required for completion as working unit complete all as specified and directed. Make :- KAFF Part No OPEC TX DHC 60/70/90 or equivalent in Sunflame/ Glen/ Faber. Note :- The complete job includes core cutting of wall for exhaust etc making arrangement for outgoing exhaust, make good after doing the complete in the existing location as directed by the Engr-in-charge.

ZAIGHAM ENTERPRISES

Shikhar ji Enterprises