WELCOME MAINT OF MD ACCN ,PERIODICAL SERVICES TO MD ACCN O CERTAIN BLDG AND REPAIR TO WALL FENCING, GATE ETC AT AT SRC, MH, ASC,MDC,SHO AT RAMGARH CANTT

Amount

Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc & removal of rubbish out off from site etc complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work using "B" class bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for Brick work but except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. Note: old serviceable brick as retrieved from item No.02 of BOQ here-in before.

M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished even and smooth (without using extra or cement), complete all as specified and directed.

M & L for 5 mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling surface finishing even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls/chajjas/lintel and applying two coat of distemper oil emulsion (OBD) (white or tinted) by applying by pump roller applicator over a coat of chalk whitening primer (preparatory to distempering) over a coat of 2 mm thick (minimum) wall care putty as approved complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by mechanical means/scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of alkali resistant primer and a layer of wall care putty (not less than 2.0 mm thick )applying by pump roller applicator complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of oil bound distemper (OBD) (white or tinted) on wall surface at any height applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for preparation of old decorated surfaces of ceiling including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of oil bound distemper (OBD) (white or tinted) on surfaces of ceiling at any height applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash on wall surface at any height complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash (lime) on ceiling surface at any height complete all as specified and directed.

M&L for prepartion of old painted of wooden surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint on old wooden painted surface complete all as specified & directed.

M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint on old steel painted surface complete all as specified & directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.

M & L for joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L for joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Vetrified ceramic light shade floor tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles over & including 20 mm thick screed bed in cement mortar (1:4) etc complete all as specified & directed.

M&L for Vetrified ceramic light shade tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 300 mm x 450 mm x7mm thick/350 mm x 250 mm x7mm thick ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves , cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars upto 10 mm dia grade Fe -500D , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M & L granite (of any type) work (table rubbed and polished) of any shade 18 to 20 mm thick in cooking platform, steps, window/cills, etc., over and including 15mm thick cement screed base in cement mortar (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab whete directed, complete all as specified and as directed.

S & F Vitreous China squatting pan Orissa pattern of size 580 mm x 440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage connection pipe etc complete including taking down existing pan & making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.

S & F vitreous China wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and including seat and cover for pedestal pan, complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S & F in repair vitreous China wash basin, any colour, flat back size 550 mm X 400 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.

S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed.

S & F in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chases for brick walls and making good the surfacein cement mortar 1:3 complete all as specified & directed.

Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.32 here-in -before.

Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.33 here-in -before.

S & F in repair angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repair two way angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repair stop cock of 15mm bore , chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repair 15mm dia central hole basin mixer with U shaped round cated spout with 450 mm long braided hoses (hot & cold), complete all as specified and as directed.

S&F in repair 15mm bore long body (weight not less than 400 gm) bib tap, cast copper alloy, CP fancy type with crutch or butterfly handle, screw down, screwed for iron pipe or for brass ferrule including flange complete all as specified and directed

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) including taking down of existing tank complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) including taking down of existing tank complete all as specified and directed.

S&F in repair PVC ball 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified & directed.

M&L for cleaning of PVC water storage tank of capacity exceeding 250 litres but not exceeding 500 litres on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing all scale silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and fixed in same position complete all as per specified and directed by Engr-in-charge.

M&L for cleaning of PVC water storage tank of capacity exceeding 500 litres but not exceeding 1000 litres on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing all scale silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and fixed in same position complete all as per specified and directed by Engr-in-charge.

M & L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades,shelves, lintel,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

S & F in repair 32 mm dia bore low density polyethylene (LDPE) pipe of pressure rating 6 Kg per sq.cm. complete all as specified and directed by Engineer-In- Charge.

S & F in repair 15mm dia brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S & F in repair for PVC connection pipe of 15 mm dia and 45cm long to WHB and flushing cistern, complete all as specified and as directed.

S & F in repairs brass chromium plated shower rose with swivel joints, 125 mm size in square with chromium plated long shank arm including fixing to steel pipe or union complete all as specifed & as directed.

S & F in repair flush pipe of polyethylene of low or high density or PVC of 32 mm dia & and 60cm long, for low level flushing cistern, complete all as specified and as directed.

S & F in repair PVC seat cover suitable for EWC any colour,complete all as specified and as directed.

S & F in repairs 32mm dia waste coupling of PTMT (half or full threaded), complete all as specified and directed.

S & F in repair for gun metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed.

S & F in repair for gun metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed.

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge .

Refixing of shutter of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, in the same opening, complete all as specified and directed by Engr-In-Charge .

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames, glazed with oil putty or fixed with beads complete all as specified and directed

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .

S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified & directed.

S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified & directed.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S&F in repair chromium plated (CP) soap tray /dish of size 160 mm x 160 mm x 90mm fixed to plugs with chromium plated brass screws in repairs complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 15cm wide with chromium plated bracket guard and railing 60cm long complete set complete all as specified and directed.

S&F brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S & F in repair towel ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1.00 mm thick sheet with plugs, washers & waste coupling and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm X 460 mm bowl size 410 mm X 330 mm X 160 mm or 405x355x178mm including 40 mm bore PVC flexible waste/flush pipe 800mm long with socket fixed with sink brass waste coupling complete all as specified and directed.

S & F in repair helth faucet (ABS body) mild steel chromimum plated sutable for 15mm dia pipe with 1.25 mtr long flaxible tube and ABS wall hook including making connections and fixed in position complete in all respectas specified & directed.

S & F in repairs bath room mirror cabinet PVC of size 450mm x 600mm fancy type, complete all as specified and directed ( Make Polytuf/Prayag/Pearl or as approved by GE .)

S & F in repairs stainless steel Kitchen plate rack of size 24"X36"X10" with steel shelves and hanging arrangments for utensil, complete all as specified and directed. (MAKE : Bluestar/Javana/Prayag)

M&L for demolition of cement concrete (un reinforced)in ground floor & paving not exc 15 cm thickness (aboveorbelow ground level )by mechanical tools and removing excavated material exceeding 1.50 km and not exceeding 5.0 km complete all as specified and directed

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in levelling course,kerb/ benching/ coping /window cill etc including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed.

M & L for 40 mm thick plain cement concrete (1:2:4) mix, type B-1 (using 20mm graded crushed stone aggregate ) as in sub base,flooring etc., finishing the surfaces even and fair without using extra cement including necessary form work, complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed by Engineer-in-charge.

S & F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S & F in repair, 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed by Engineer-in-charge.

S & F in repair PVC (SWR) bends for 110 mm pipe, with rubber ring joints, complete all as specified and as directed.

S&F 110 mm PVC(SWR) bends for 75mm bore with rubber ring joints, complete all as specified and as directed.

S & F in repair PVC (SWR) 110 mm bore junction singel, (Single T) equal or unequal, with rubber ring joints, complete all as specified and as directed.

S & F in repair 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F in repair for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed.

M & L for obliterating old writing of any description not exceeding 0.10 Sqm with synthetic enamel paint to match existingletter and rewriting existing letter, complete all as specified and directed by Engr.-in-charge.

M&L for preparation of newely plastered surfaces of wall/Chajjas/lintel and applying three coat of white wash on new wall surface complete all as specified & directed.

M&L for preparation of newly plaster surface of walls/chajjas/lintel and applying two coats of cement base paint white or tinted over a coat of alkali resistant primer including necessary scaffolding complete all as specified & as directed.

M&L for preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of cement base paint on wall surface at any height by applying by pump roller applicator complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of cement base paint on wall surface etc.,applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of oil bound distemper on wall surface at upto 10 Mtr height applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for preparation of old decorated surfaces of wall including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying two coat of oil bound distemper on wall surface at upto 10 Mtr height applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for preparation of old decorated surfaces of ceiling including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of oil bound distemper on ceiling surface at upto 10 Mtr height applying by pump roller applicator of any shade or tint complete all as specified & directed.

M&L for prepartion of old painted of wooden surface of any description, not otherwise described over 10 cm in width or girth and applying two coat of synthetic enamel paint (ordinary tint) over a coat of pink primer ,with & including change of existing colour with removal of scaled paint complete all as specified & directed.

M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and change of existing colour including removal of scaled paint and applying two coat of synthetic enamel paint over a coat of red oxide primer for change of existing colour complete all as specified & directed.

Removing of trees/ plants including roots of girth not exceeding 30 cm from wall / roof top surface and making good the disturbed surfaces before applying finishes, complete all as specified and directed.

Dismantling post or struts (wood,steel or RCC) any position,including taking out embedded portion and making good disturbed ground, post embedded in concrete, brick work, masonry etc & removal of rubbish out off from site etc complete all as specified and directed. (Note- Only embedded portion of post or strut will be measured and paid)

Excavation in post holes (or similar holes) not exceeding 0.5 cum, getting out, & removing surplus soil material to a distance not exceeding 50 mtr & making good surface complete all as specified & directed.

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/ pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L for plain cement concrete 1:3:6 ,type C-2 (using 40 mm graded crushed stone aggregate) as in foundations,filling & mass concrete for fencing posts, foundation of pole, struts & stay assembly etc complete all as specified and directed.

M&L for mild steel work conforming to Fe.290.Gde-E-165 as in fencing posts & struts including cutting tops to shape as required, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) and embedding in concrete complete all as specified & directed.

Dismantling of chain link fencing wire mesh any size or type complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including fixing of flat iron ,mild steel round bars & mild steel screws bolt and provision of binding wire complete all as specified & directed.

Supply only 3.15 mm dia GI wire 75 mm x 75 mm mesh (chain link fencing) made up to mattresses or cages lapped wired and laid in position including closing and tied with posts properly complete all as specified & directed..(NOTE:Unit weight of chain link fencing will be measured and paid as per BOO)

Supply only flat iron as in support/ hanging for fencing including cutting to shape as directed including suitable size mild steel screw bolt with washer & one hexagonal or sqare nut of length not exceeding 5 cm ,end all necessary drilling, bolting ,riveting etc.,and similar work conforming to Fe-290 Gde-E-165 complete all as specified & directed.

S&F in repairs mild steel round bars 10 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips conforming to Fe-410 W complete all as specified & directed.

Dismantling structural steel work of including doors ,gates but excluding framed trusses any description complete all as specified and as directed.

S&F in repairs Galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc all as specified and Directed (each line wire to be measured) complete all as specified & directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe-410 W Gde-E-250 quality B complete all as specified & directed.

S & F 1.00 mm thick mild steel, plain, black sheet in covering to door shutters, covering to door chowkhats (frames) cut to size edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc., as required, complete all as specified and as directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window & similar work etc.including necessary form work complete all as specified and directed

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in levelling course,kerb/ benching/ coping /window cill etc including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed.

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, and removal of debries from site complete all as specified and directed.

M/S SHAMBHU SHARAN SINGH (BID ID -3339565)

M/S BIJAY KUMAR SINGH (BID ID -3342513)

Modernage Constructions Pvt. Ltd. (BID ID -3339560)

upadhyay engineers and consultant (BID ID -3339362)

M/s Ray construction (BID ID -3337456)

M/S Bhushan Kumar Jain (BID ID -3339627)

M/s Manoj Kumar Gope (BID ID -3347370)