Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC | ₹2.3 L | L1 | Accepted-AOC LOW RATE |
| 2 | L2₹2.3 LRejected-AOC | ₹2.3 L | L2 | Rejected-AOC HIGH RATE |
| 3 | L3₹2.6 LRejected-Finance | ₹2.6 L | L3 | Rejected-Finance HIGH RATE |
| Sl No | Description | Qty | Unit | SHARAFUDHEEN M K L2 | ANIL KUMAR M L1 | ABDUL NAVAS BM L3 |
|---|---|---|---|---|---|---|
| 1.00GLPS IRIYANNI | ||||||
| 1.00 | 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.93 | cum | 10,014.76 ₹9,333.76 | 9,589.41 ₹8,937.33 | 10,839 ₹10,101.95 |
| 1.00 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | 12.24 | sqm | 790.81 ₹9,679.51 | 757.22 ₹9,268.37 | 855.89 ₹10,476.09 |
| 1.00 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 74.52 | kilogram | 88.15 ₹6,568.94 | 83.8 ₹6,244.78 | 94.72 ₹7,058.53 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 321.32 | kg | 150 ₹48,198.15 | 145.81 ₹46,851.82 | 164.81 ₹52,956.91 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 182.04 | sqm | 632 ₹1.2 L | 632.29 ₹1.2 L | 714.68 ₹1.3 L |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 10.6 | metre | 443.06 ₹4,696.44 | 424.24 ₹4,496.94 | 479.52 ₹5,082.91 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 276.36 | kg | 146.66 ₹40,530.96 | 140.43 ₹38,809.23 | 158.73 ₹43,866.62 |
Tender Value
₹2.9 L
EMD Value
₹7,197
Closing Date
15 Oct 2025, 4:00 pmClosed
REESHNA VENU
OFFICE OF ASSISTANT ENGINEER MULIYAR GP
Annual Plan-MULIYAR GP GLPS IRIYANNI IMPROVEMENT-PRO.NO 177/25-26
2025_LSGD_806415_18
05/ 25-26/AE/LID EW/MLR
Open Tender
Civil Works - Buildings
180 days
OFFICE OF ASSISTANT ENGINEER MULIYAR GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹635
Yes
₹7,197
Yes
31 Dec 2025
8 Oct 2025
17 Oct 2025
8 Oct 2025
15 Oct 2025
8 Oct 2025
Amount
GLPS IRIYANNI
5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
SHARAFUDHEEN M K (BID ID -2388138)
ABDUL NAVAS BM (BID ID -2390442)
Bidder Name
ABDUL NAVAS BM
SHARAFUDHEEN M K
ANIL KUMAR M
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1345022.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid