Revamping of Rest rooms at T3 Phase 1

Civil & Interior Works Providing and laying in position cement concrete of specified grade at all levels excluding the cost of centering and shuttering 1:3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size derived from natural sources) As per standards, specifications and directed by the Engineer-in-Charge.

Providing and laying in position ready mixed or site batched design mix cement M25 concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. with minimum cement content 400 Kg per Cum

Providing and placing reinforcement for RCC work including straightening, cutting, bending, placing in position and binding with 16 gauge GI binding wire etc complete including cost, conveyance, lead, lift of all materials for all types of RCC works at all levels as per drawing/specification and as directed by Engineer-in-charge . Thermo-Mechanically Treated bars of grade Fe-500D or more.As per standards, specification and directed by the Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. As per standards, specification and directed by the Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers at all levels. As per standards, specification and directed by the Engineer-in-charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete at all heights. Painting steel work with two or more coats of Synthetic enamel paint of Ist quality and approved colour to give an even shade over two coats of zinc rich apoxy primer (70 micron) including, filling the joint welding with metal paste and cleaning the surfaces, Working platfrom/scaffolding & the DFT test of primer & paint etc; complete all as per specifications.Rate is inclusive of the primer and painting works . Complete at all levels and locations.As per standards, specification and directed by the Engineer-in-charge.

Supplying, Drilling/Cleaning hole and injecting anchoring bolts with approved chemical with the help of dispenser, into a hole of dia & depth as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Rate to Inclusive of Drilling in Blockwork / RCC etc. as per the requirement at all levels,complete., as per standards, specifications and as directed by the Engineer in charge. 10mm Dia rebar, 125mm to 150mm in depth

Supplying, Drilling/Cleaning hole and injecting anchoring bolts with approved chemical with the help of dispenser, into a hole of dia & depth as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Rate to Inclusive of Drilling in Blockwork / RCC etc. as per the requirement at all levels,complete., as per standards, specifications and as directed by the Engineer in charge. 12mm Dia rebar, 150mm to 180mm in depth

Supplying, Drilling/Cleaning hole and injecting anchoring bolts with approved chemical with the help of dispenser, into a hole of dia & depth as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Rate to Inclusive of Drilling in Blockwork / RCC etc. as per the requirement at all levels,complete., as per standards, specifications and as directed by the Engineer in charge. 16mm Dia rebar, 200mm to 240mm in depth

Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 100 mm/ 125 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. m/ 125 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level at all levels in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. As per standards, specification and directed by the Engineer-in-charge.

Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 150mm/230mm/300 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level at all levels with RCC band at every 1.2m with approved block laying polymer modified adhesive mortar all complete As per standards, specification and directed by the Engineer-in-charge.(The payment of RCC band and reinforcement shall be made for separately).

Providing and laying 12mm thick cement plaster on surfaces with fine sand including curing etc for internal walls .As per standards, specification and directed by the Engineer-in-charge. 1:6 (1 cement : 6 fine sand)

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)/ with adhesive laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge (The purchase price should be taken as Rs.800/Sft excluding GSTand any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.)

Providing and fixing machine cut, mirror/ eggshell polished ,Marble stone work for wall lining including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture for dadoing using specified adhesive over a prepared surface, ensuring line, level, and plumb; all joints filled with matching grout; the surface shall be machine-polished including 3 coat of grinding, 2 coat of honing, 2 coats of polishing using recommended chemicals/elements to achieve a uniform finish etc lead , lifts at all levels, . all complete as per Architectural drawings, and as per standards, specification and directed by the Engineer-in-charge. (The purchase price should be taken as Rs.800/Sft excluding GST and any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.)

Providing and laying vitrified floor tiles in different sizes & thickness of the tiles should be 9/10mm with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shade laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477,(average thickness as per manufactures' specification) having spacers 3mm with spacer filling with resin based epoxy grout with high degree of resistance to chemical attack,abrasion and resistance confirming to British Standards 5980:1980 and matching pigment etc. complete.The rate is inclusive of labour, material , tools, lead, lifts at all levels and transportation and in required pattern As per standards, specification and directed by the Engineer-in-charge. Size of tiles shall be 600mmx600mm (The purchase price should be taken as Rs.80/Sft excluding GSTand any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.)

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive thickness of minimum 4mm applied at the rate of 4 kg per sqm and grouting of the same. The rate is inclusive of all labour, material , tools, all lead, lifts at all levels, transportation and in required pattern as per standards, specification and directed by the Engineer-in-charge. (The purchase price should be taken as Rs.1500/Sft excluding GST and any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.)

Providing and fixing Vanity counter of size in various Lengths , D-600mm with front facia of 50mm made by fixing 18mm fiber cement board boxing to the toilet wall with adequate supports in form of MS bracket. Fixing 12mm thick corian ( paid seperately ) with araldite epoxy adhesive on top and sides of the counter, with mitered joints making provision in the counter top for fixing counter sunk wash basin and for fixing tap and soap dispenser. Including filling of matching colour epoxy mastic joining compound in all joints and cracks and polishing all edges and joints to a mirror polish. The work shall include all materials, labours, scaffolding, tools & tackles, any cut-out for services, Lead lifts at all levels MS brackets to be painted with two coats of Enamel paint over a coat of approved Zinc chromate primer(Rate shall be inclusive of the MS structure and the painting), leads and lifts etc. all complete as per approved shop drawings and as per standards, specifications and directed by the Engineer-in-Charge. Mode of Measurement : Plan area

Supplying, handling, and installing 12mm thick solid acrylic sheets for counters, including cutting, edge profiling, jointing, buffing, provision for cut-outs, adhesives, sealants, and all necessary consumables, complete as per approved design, manufacturer’s guidelines, and instructions of the Engineer-in-Charge. The rate shall include transportation, lead, lift at all levels ,storage, wastage, protection of finished surfaces, cleaning, and disposal of debris. The base purchase price of Corian shall be considered as ₹950/Sft excluding GST and any variation in approved shade price shall be adjusted (extra or deduction) at the time of billing. Work shall conform to relevant standards and ensure seamless finish and proper alignment.

Providing and fixing of 12mm thick flexiply cladding on mild steel (MS) frame structures (MS work paid separately), comprising 12mm thick flexiply panels securely fixed to cleaned, fabricated, and primed MS frames using stainless steel screws and suitable adhesives as per standards. 6mm solid acrylic cladding is provided over the flexiply (shall be paid separately). Provision of openable shutter with necessary hardware and accessories like handles , hinges , locks etc. with MS framing work, ensure water-resistant, termite-proof, and durable surface finish. All works shall include fabrication, cutting, fixing, alignment, edge finishing, and providing necessary supports and reinforcement for stability and uniformity, complete as per detailed drawings and engineer's instructions. The unit rates shall include materials, labor, tools, transportation, scaffolding, and finishing, ensuring a neat, maintenance-free, and aesthetically pleasing cladding system at all levels & Lead complete the work as per the detailed drawings & as per standards, specification and directed by the Engineer-in-charge Mode of Measurement : Elevation area

Supplying, handling, and installing 6mm thick solid scrylic sheets for counters, including cutting, edge profiling, jointing, buffing, provision for cut-outs, adhesives, sealants, and all necessary consumables, complete as per approved design, manufacturer’s guidelines, and instructions of the Engineer-in-Charge. The rate shall include transportation, lead, lift at all levels ,storage, wastage, protection of finished surfaces, cleaning, and disposal of debris. . The base purchase price of Corian shall be considered as ₹650/Sft excluding GST and any variation in approved shade price shall be adjusted (extra or deduction) at the time of billing. Work shall conform to relevant standards and ensure seamless finish and proper alignment.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing dry cladding as per per the Architectural Drawing with 20mm thick mirror polished marble cladding with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of SS 304 grade cramps, pins etc.(Rate shall be inclusive of all cramps and pins) and and jointed with pigment of matching shade, including rubbing, curing, polishing etc. all complete . The rate are inclusive of all materials , labour, all lead , lifts at all levels, transportation etc completed as per Architectural drawings, and as per standards, specification and directed by the Engineer-in-charge (The steel frame work,shall be paid for separately). The purchase price should be taken as Rs.800/Sft excluding GST and any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.

Providing and fixing structural steel frame (for dry cladding with 20 mm thick mirror polished marble cladding with machine cut edges) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm,including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes, stainless steel cramps/ pins etc.shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer in- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment and nothing extra shall be paid). Complete the all work as per standards, specifications and directed by the Engineer-in-Charge.

Supplying , providing and fixing Sliding 35mm thick flush door shutter in position shutters phenol bonded with both side cladded with 1mm thick laminate of approved shade, all as per design shown on the drawing including cost of teak wood lipping and if any,complete. The rate should be inclusive of laminate for shutter to approved shade & complete. Door Hardware & Iron mongery shall be under the scope of contractor for smooth installation and is inclusive in the rates. All hardware shall be approved by the EIC. The job shall be completed in all aspects as shown in the architecture drawing and as specified by the Engineer in Charge including all other necessary related works as specified and as per standards, specifications and directed by the Engineer-in-Charge. The rate inclusive of providing a) 1 No - Aluminium slide Channels - Rs 4000 /Each b) 2 No - Bottom Guide channels c) 2 No - Catch fitings for the ends d) 1 No - PVC Door Bush - Rs.100 / Each e) 2/4 No - Rollers - Rs.500 / Each f) 1 No - Door lock with handle per drawing - Rs.1100 / Each. SD - 1200 mm x 2400 mm . The purchase price ( excluding GST ) is mentioned in basic price and any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.

Supplying , providing and fixing in position of 35mm thick Marine grade Flush shutters phenol bonded with both side cladded with 1mm thick laminate of approved shade, all as per design shown on the drawing including cost of beading , teak wood lipping and if any,complete. The rate should be inclusive of laminate for shutter to approved shade & complete. Door Hardware & Iron mongery shall be under the scope of contractor for smooth installation and is inclusive in the rates, All hardwares to be approved by the EIC. The job shall be completed in all aspects as shown in the architecture drawing and as specified by the Engineer including all other necessary related works as specified and as per standards, specifications and directed by the Engineer-in-Charge. The rate inclusive of providing a) 2 Nos - of SS patch fittings - Rs 1000/Each b) 1 No - Concealed Door Closer slide Arm channel - 01 no's - Rs. 6800/ Each c) 1 No - Door Stopper - Rs.300 / Each d) 1 No - Flush tower bolt - Rs.100 / Each e) 1 No - Door lock with handle per drawing - Rs.1100 / Each. DD - 900 mm x 2400 mm . The purchase price ( excluding GST ) is mentioned in basic price and any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.

Providing & fixing Cubicle self-supporting 12mm thick compact laminates, manufactured through high pressure and temperature processes in accordance with EN 438- Part 4 standards. The panel's core comprises a specified number of Kraft papers impregnated with thermosetting phenolic resin, while the decorative layer is impregnated with thermosetting Melamine resin. These panels offer exceptional resistance to scratches, abrasions, heat, cigarette burns, chemicals, impacts, graffiti, and moisture, as well as possessing anti-bacterial properties. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 304/316 ) as per manufacturer’s specifications & Architects instructions like (1) Door Knob (2) Spring Loaded Hinges (3) Thumbturn lockset with occupancy indicators (4) U-Channels (5) Shoe Box (6) Rectangular box type toprail (7) Floor Anchor (8) Rubber noise deafening tape (9) Screws & wall Plugs. The top fitting should consists of brush type finish rectangular box type toprail which will get fixed with pilasters and the bottom should be placed on the floor All screws will of 304 Grade in stainless steel . All pilasters are supported by stainless steel shoe box. Note : Shop drawings for the Cubicle to be submitted before starting the production and get approval from Client / Architect ) Toilet cubicle shape and size as per the GFC drawing

Providing and fixing suspended false ceiling (Seamless gypsum false ceiling), at all levels which includes providing and fixing G.I Perimeter channels of size 0.50mm thick with unequal flanges of 20mm and 30mm and a web of 28mm along the perimeter of ceiling, screw fixed to brick or RCC wall /partitions with the help of nylon sleeves and screws, at 230mm centres. Then suspending G.I. Intermediate channels of size 45x15mm, 0.9mm thick from the structural roof members as per drawing at 1220mm centres (maximum) with ceiling angle of 25mmx10mmx0.5mm bolted to structural roof members with suitable arrangement for proper fastening. Ceiling section of 0.5mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457mm centres. 12.5mm moisture resistant tapered edge Gypsum board (conforming to IS-2095- part 1: 2011)is then screw fixed to ceiling section with 25mm dry wall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment.The boards shall be jointed and finished to a flush finish of tapered and square edges of gypsum board (including providing V grooves in cut tiles wherever necessary )with recommended jointing compound filler ( 2 coat putty) with paper tapes, control joints and finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and finished on the bottom side with two coats of approved putty,two coats of approved primer suitable for gypsum board as per manufacturers specifications and two coats of plastic emulsion paint of approved brand and two coats of approved quality water sealant on the top surface of gypsum board. The ceiling shall be provided with recessed portions/coffers/cove as per drawing. Nothing extra shall be paid for providing specified number of recesses at different levels. The vertical/slanting portion between different levels shall also be provided with 12.5mm Moisture resistant gypsum board panels fixed by means of 25x10x0.5mm GI angle sections and ceiling sections as specified.The rate shall also include the cost of making openings of any shape for light fittings, grills, diffusers, cut-outs etc. made with frame of perimeter channels as per drawing and finishing the edges as directed by Engineer-in-charge.The rate shall include cost, lead, lift of all materials, labour, scaffolding charges, painting etc.complete as per drawings, specifications and direction of Engineer-in-charge. The measurement shall be in square metres and deductions shall be made for all openings exceeding 0.4 sqm in area.The exposed vertical area also will be measured and paid along with horizontal area.

Painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. As per standards, specification and directed by the Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.As per standards, specification and directed by the Engineer-in-charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. (for internal wall). As per standards, specification and directed by the Engineer-in-charge.

Providing and fixing of Trap door for a gypsum false ceiling typically features a durable aluminium or galvanized steel perimeter frame fitted with a 12.5 mm thick moisture-resistant gypsum board panel, ensuring lightweight and seamless integration with the surrounding ceiling surface for an unobtrusive appearance. The panel is usually flush-mounted, finished smooth, and can be powder-coated or painted to match the ceiling; provision of door sizes as per drawing. Operation is generally via a concealed push latch or magnetic catch mechanism, allowing easy access without visible handles—hinges may be hidden or feature a safety chain for larger panels. These access doors are non-fire rated , quick to install, and well-suited for maintenance access to MEP services above the ceiling all complete as per drawing & as per standards, specifications and directed by the Engineer-in-Charge.The rate shall include all the labour, materials including all hardwares and fixtures , all lead, lifts at all levels, transportation etc.

Supply, fabrication, and installation of a double-sided hanging mirror unit suspended from the ceiling using two stainless steel (SS) tubes of 50mm diameter with pvd finish of approved color/shade from architect, securely anchored to the ceiling structure as per approved details. The mirror panel shall be framed on all four edges with a 50mm wide SS frame (pvd finish), enclosing 5mm thick clear float mirrors on both sides. The internal structure shall consist of a 25x25mm thick aluminum box section framing to provide rigidity and support to the mirror assembly. All metal components must be corrosion-resistant, finished to high aesthetic standards, and installed plumb, aligned, and securely fixed.The rate inclusive of Cladding of Mirror allround with the side beadings, required Hanging supportsfrom true ceiling as per standards, finishing joints, Material, Labour, providing & removing necessary Scaffolding, making cut out for electrical, cove lights & switches etc., complete at all levels as per the Detailed drawings & As per standards, specification and to the satisfaction Engineer-in-charge. Mode of Measurement : Front Elevation of the mirror

Providing & fixing Mirror Paneling including Marine ply confirming to IS -710 paneling made out of 12mm thick ply wood board fixed over Aluminium framework of 20mm X 50mm sections at approximately 600 mm c/c both ways with adequate supports from the wall. The ply shall be fixed with 6mm thick clear mirror with all sides CNC machine polish using 3M mirror tape on sides and clear neutral silicon in center. The work shall include all materials, labours, scaffolding, tools & tackles, any cut-out for services, leads and lifts etc. all complete as per approved shop drawings and as per standards, specification and directed by the Engineer-in-charge.

Supply, fixing and installation of Storage Unit of Size as per the drawing on floor with 18mm thick marine plywood confirming to IS -710 with inside finished with 1 mm laminate, and all exposed surface finish with 2mm thick marble finish laminate . Post form shutters of 12mm thick grade plywood with 2mm laminate in facia as specified in drawings and 1 mm laminate on backside.. laminate design and pattern as per the detailed dwg , including with necessary hardware and accessories like conceald handles , hinges etc with all tools, labour , providing & removing scaffolding ,etc all complete as per the specification and design drawing and as instructed by the Engineer-in-Charge. Note : Shop drawings to Produce before production. 1. Plain unit with shutter and adjustable Shelves divided equally as shown in the drawing The rate inclusive of 75mm high from floor and 50mm recessed for Skirting, Material, Labour, providing & removing necessary Scaffolding,provision for placing sink bowl, making cut out for electrical, cove lights & switches etc., complete at all levels as per the Detailed drawings & As per standards, specification and directed by the Engineer-in-charge. Mode of Measurements : Elevation area

Providing mixing and applying a two component acrylic reinforced cementitious waterproof coating over the surface after removing all the loose matter, minor repair, honeycombed area and treat construction joints with non-shrink fibre reinforced mortar including appropriate primer as specified by the manufacturer.The water proofing shall be applied at a total consumption as directed by the manufacturer and allowed to cure. The second coat shall be sprinkled / Broadcast with sand while in tacky state to provide bond, all complete as per the instruction of manufacturer and as directed by the engineer incharge.The above costing is inculsive of bore packing with grouting material recommended by EIC.Complete the work as per standards, specifications and directed by the Engineer-in-Charge. Waterproofing shall have following performance property. The rate shall include all materials , labour, Elongation upto 40% (28 days curing) Water penetration resistance @ 5 Bar as per DIN 1048 - NIL, all complete as per the instruction of manufacturer and As per standards, specification and directed by the Engineer-in-charge.

Demolishing brick / block work / wall plastering in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material upto 5Kms lead as per standards, specification and directed by the Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material upto 5Kms lead of Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) as per standards, specification and directed by the Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material upto 5Kms lead as per standards, specification and directed by the Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking upto 5Kms lead :Of area 3 sq. metres and below as per standards, specification and directed by the Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking upto 5Kms lead :Of area beyond 3 sq. metres as per standards, specification and directed by the Engineer-in-charge.

Dismantling MS & SS Steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking upto 5Kms. as per standards, specification and directed by the Engineer-in-charge.

Dismantling tile work in floors/Walls and roofs laid in cement mortar including stacking material upto 5Kms lead.For thickness of tiles 10 mm to 25 mm , as per standards, specification and directed by the Engineer-in-charge.

Dismantling stone slab/corian laid in cement mortar including stacking of serviceable material and disposal of unserviceable material upto 5Kms as per standards, specification and directed by the Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundupto 5Kms lead. as per standards, specification and directed by the Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing,fabrics and false ceiling including disposal of unserviceable material and stacking of serviceable material upto 5Kms lead as per standards, specification and directed by the Engineer-in-charge.

Dismantling W.C. Pan/Urinals/Wash basins of all sizes including disposal of dismantled materials all complete as per standards, specification and directed by the Engineer-in-charge.

Providing and fixing of Barricading works using plywood typically involve plywood panels supported by galvanized steel or tubular steel legs, with necessary braces for stability. A common specification includes barricades with plywood boards of 19mm thickness finished with 0.8mm laminate on one side, lengths varying as per the site conditions, and legs made from galvanized steel or PSST (painted steel square tubing) with dimensions as per the site. The barricades are equipped with reflective sheeting for visibility, meeting standards. The plywood panels are fixed center-to-center at 600c/c minimum, with support braces or anti-rotation stabilizers for enhanced stability. The barricades may have breakaway bases for safety and detachable feet for transport efficiency. complete the work as per standards, specifications and directed by the Engineer-in-Charge.

PHE Supplying, Fixing, testing & commissioning of approved make glazed European water closet wall mounted type with concealed cistern. The quoted price shall also include all internal parts of the cistern with colour plastic solid seat and cover with rubber buffers and flap, heavy duty plastic hinges, CP brass wall plate complete including 110mm dia WC connector, SS304 extension bolts & silicone sealant .(For all toilets) basic price of Wall Mounted EWC - Rs 50,000 Excluding GST, Concealed Cistern 8 cm thickness, Flow pressure - 0.1-10 bar, Maximum operating temperature, water - 25 °C, Flush volume - 6 and 3 L. - 10900,Chrome finish flush plate - 2900, Actuation force - < 20 N - 1200. (The purchase price should be taken as Rs 50,000/- excluding GST and any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make physically handicapped toilet set consisting of floor mounted EWC with seat cover, wall hung washbasin, single lever clinical faucet, wall mounted grab bar, hinged hand rail, bottle trap, waste coupling & paper holder. The quoted price shall also include 1no. 15mm CP brass angle cock,CP brass Inlet connection pipe, CP brass wall flange, all internal parts of the cistern colour plastic solid seat and cover with rubber buffers and flap, heavy duty plastic hinges, complete including 110mm dia WC connector & silicone sealant. ( For Physically Challenged Toilet ).basic rate of Differently Abled floor mounted one piece EWC with Soft Seat Cover suitable - Rs 60,000, flush Tank - Rs 10,900, Wall Hung Clinical Wash basin - Rs 7500, Chrome Plating Clinical single lever faucet with 200 mm lever - Rs 2500, Wall Mounted SS with anti slip coating Grab Bar - 3 Nos. - Rs 7050, U Shaped Wall mounted rail (with hinge) 600 x 100mm - 1 No. - Bars made from SS with anti slip coating -Rs 8000, U ShapedWall mounted rail (without hinge) 600 x 100 mm - 1 No. - Bars made from SS with anti slip coating - Rs 5000, CP Bottle Trap - 1 No, Waste Coupling - 1 No, CP Angle Cock - 2 Nos, CP Toilet Roll Holder - 1 No, SS304 extension bolts etc.All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make glazed oval wash basin below counter 15mm Long body C.P. pillar wall mounted sensor based Cock, 32mm dia CP waste coupling, 32mm dia C.P.bottle trap with C.P. extension pipe,C.P.spreader unit GI expansion bolts, supporting bracket with necessary steel to support basin 1 No.15mm CP angle valve with 450mm long CP connection pipe, Silicone Sealant and CP wall flanges all of approved make etc., complete.basic rate of Below Counter Oval Washbasin - Rs 30,000, CP Single lever basin mixer Fine wall-mounted with spout - Rs39,740, CP Bottle Trap - Rs 1200/- , CP Angle Cock- Rs 600/- , CP Waste Coupling- Rs 500/- , SS304 Extension Bolts etc. All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price in the approved shade will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make colored large flat back sensor based urinals with 40mm C.P. dome type waste coupling 40mmC.P. bottle trap with C.P. extension pipe, etc., C.P.spreader unit GI expansion bolts etc., complete.( Bottle trap & waste coupling contractor to be check with model while installing.), Base rate of Sensor Based Urinals - Rs 90,013/-, Bottle Trap- Rs 1200/-, Waste Coupling- Rs 500/- , SS304 Extension Bolts etc. All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make 15mm CP health faucet of approved make with necessary CP flexible hose 1000mm long nozzle,CP wall flange, CP angle cock etc., complete.Base price of Health Faucet - Rs 6000/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make 15mm CP bib cock with CP flanges with SS/matte finish wall flange and accessory all nut and Bolt are SS 304 to be considered all complete as per specifications.and direction of the Engineer-in-charge.including necessary fixing materials etc.,complete..Base price of Bib Cock - Rs 1000/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make 15 mm dia CP angle cocks fSupply, installing, testing and commissioning of 15mm Dia Cp Angle Cock cost shall include brackets, cutting and making good the wall and floor wherever required, including cost of materials, labourincluding lead and lift charges,all nut and Bolt are SS304 to be considered allcomplete as per specifications and direction of theEngineer-in-charge. Base price of angle cock - Rs 600/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make Push ABS liquid Soap dispenser of 1000ml of capacity of approved make with necessary fixing materials etc.complete, basic rate of Liquid Soap Dispenser - Rs 22,440/-. All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, fixing, testing and commissioning of approved make Electric Hand Drier twin blower integrated with timer (0-3 minutes) and infrared arrangement. The drier shall be fully automatic.base rate of Wall Flushed Electric Hand Drier - 1,19,400/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make Water cooler comprising with necessary accessories including suitable extension pipe etc… for drinking water point area.Body. - SS 304, Unit Dim (WxDxH) in mm - 550x525x1450, Pre-Filter + Pre Carbon + Post Filteration + UV - Yes, No. of Faucets - 3 (N+C+H)**, Storage Tank Capacity - 80 Lts, Hot Water - 5 Lts, Cold Water - 40 Lts, Normal Water - 35 Lts, base rate of despenser 65000. All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make Surface-Mounted Klutch Mobile Device Holder, Satin Finish with necessary screws, Clamps etc., complete. Base Rate of Mobile holder Rs 10,560/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make SS body Tissue Roll Dispenser with necessary screws, Clamps etc., complete. Base Rate of Tissue Roll Dispenser Rs 3240/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make SS body Tissue Bin as per the approved size and shape etc., complete. Basic Rate of Tissue Bin Rs 5100/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make SS Floor Trap as per the approved Drawing etc., complete. Basic Rate of SS floor trap Rs 1200/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make SS Robe Hook with necessary screws, Clamps etc., complete. as approved by architect and Engineer in charge.base rate of twin coat - Rs 3600/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, Fixing, testing & commissioning of approved make 110mmx110mm dia low noise PVC 'P' trap with bose pipe arrangements & and slotted type floor grating bronze chrome plated ring and grate with SS screws with necessary pipe support fixed below or above slab with GI suspenders. base price of Cockroach Trap - Rs 1300/- All the base prices are exclusive of GST and any any deviation plus or minus in the purchase price will be adjusted ( paid extra or deducted ) at the time of billing.)

Supplying, installing, fixing, jointing, testing and commissioning of approved make Chlorinated Polyvinyl Chloride pipes & fittings (CPVC) SDR.11, The fittings and specials such as tees, elbows, couplers, bends, enlargers etc, with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1:1 restore the same original condition neatly as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846.above 50mm dia CPVC sch-80 pipes & Fittings confirming ASTM F441 & fittings confirming ASTM F 439. ( only cold & flushing Water Supply) Diameter 15mm

Supplying, installing, fixing, jointing, testing and commissioning of approved make Chlorinated Polyvinyl Chloride pipes & fittings (CPVC) SDR.11, The fittings and specials such as tees, elbows, couplers, bends, enlargers etc, with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1:1 restore the same original condition neatly as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846.above 50mm dia CPVC sch-80 pipes & Fittings confirming ASTM F441 & fittings confirming ASTM F 439. ( only cold & flushing Water Supply) Diameter 20mm

Supplying, installing, fixing, jointing, testing and commissioning of approved make Chlorinated Polyvinyl Chloride pipes & fittings (CPVC) SDR.11, The fittings and specials such as tees, elbows, couplers, bends, enlargers etc, with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1:1 restore the same original condition neatly as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846.above 50mm dia CPVC sch-80 pipes & Fittings confirming ASTM F441 & fittings confirming ASTM F 439. ( only cold & flushing Water Supply) Diameter 25mm

Supplying, installing, fixing, jointing, testing and commissioning of approved make Chlorinated Polyvinyl Chloride pipes & fittings (CPVC) SDR.11, The fittings and specials such as tees, elbows, couplers, bends, enlargers etc, with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1:1 restore the same original condition neatly as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846.above 50mm dia CPVC sch-80 pipes & Fittings confirming ASTM F441 & fittings confirming ASTM F 439. ( only cold & flushing Water Supply) Diameter 32mm

Supplying, installing, fixing, jointing, testing and commissioning of approved make Chlorinated Polyvinyl Chloride pipes & fittings (CPVC) SDR.11, The fittings and specials such as tees, elbows, couplers, bends, enlargers etc, with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1:1 restore the same original condition neatly as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846.above 50mm dia CPVC sch-80 pipes & Fittings confirming ASTM F441 & fittings confirming ASTM F 439. ( only cold & flushing Water Supply) Diameter 40mm

Supplying, installing, testing and commissioning approved make Forged brass ball valves PN16 , IS 1703-1977 with screwed ends, necessary unions etc., complete.20mm Dia

Supplying, installing, testing and commissioning approved make Forged brass ball valves PN16 , IS 1703-1977 with screwed ends, necessary unions etc., complete.40mm Dia

Supplying, installing, testing and commissioning approved make CI butterfly valves standard lever type PN16 confirming to IS 13095 with necessary flanges nuts & bolts, Noeprene rubber gaskets etc., complete. 50mm dia

Supplying, installing, testing and commissioning approved make CI butterfly valves standard lever type PN16 confirming to IS 13095 with necessary flanges nuts & bolts, Noeprene rubber gaskets etc., complete. 65mm dia

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Fire Alarm & Detection System Supplying, installing,testing and commissioning approved make analogue addresable multisensor smoke detector with mounting based LED address switch to programme the detectors complete as req,

Supply,Installation,Testing & Commissioning of response indicator as per standards.

Supplying, installing, testing and commissioning approved make twin core 1.5 sq.mm cross-section armoured control cables made of PVC insulated copper conductor, PVC sheathed, confirming to IS 694 etc., complete as per detailed specification.

HVAC Supply, Fabrication, Installation and testing of 120GSM Galvanised Sheet Steel metal ducts (FACTORY FABRICATED DUCTS) in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods, anchor bolts, GI bolts & nuts, canvas connections, duct dampers & splitter dampers etc., and as required by the specifications. All size duct should be with TDF / duct mate joints. The gauges shall to be as per SMACNA standards. 24 Guage Galvanised sheet steel

Supply, installation, testing & commissioning of Round Spigot Butterfly Dampers with 22G Frame& 24G Blade and quadrant operated with one side flange and one side. Single flap, necessary stopper, flanges for fastening on to the duct surface and with grooves for clamping the flexible ducts securely. 150mm dia

Supply & installation of 24G GI Circular duct with one end Circular flange & another end with spigot connection for flexible duct connection 150mm Dia

Supply, Fabrication, installation and testing of the Uninsulated flexible duct shall be made of double lamination of metalized polyester film permanently bonded to a coated spring steel wire helix. Duct shall be in tear and puncture resistant construction. The cost should be including jubliee clamp 150mm dia

Supply and installation of Exhaust Valves constructed from steel spinning's / plastic/MS with powder coating finish with subframe for easy installation with round flange on one side and groove on other side for fixing of flexible duct. 150mm dia

Supply, installation, testing and balancing of GSS Volume Control Dampers with operating handle for Supply air duct branches in accordance with the approved shop drawings and specifications.

Electrical Works Supply of 20mm dia medium duty ISI marked 2mm thick FRLS PVC conduit including all accessories like bends, junction boxes, couplers, saddles screws etc ,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit as required complete as detailed in technical specification.

Laying of 20mm dia medium duty ISI marked 2mm thick FRLS PVC conduit including all accessories like bends, junction boxes, couplers, saddles screws etc ,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit as required complete as detailed in technical specification.

Supply of 25mm dia medium duty ISI marked 2mm thick FRLS PVC conduit including all accessories like bends, junction boxes, couplers, saddles screws etc ,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit as required complete as detailed in technical specification.

Laying of 25mm dia medium duty ISI marked 2mm thick FRLS PVC conduit including all accessories like bends, junction boxes, couplers, saddles screws etc ,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit as required complete as detailed in technical specification.

Supply of 4 Runs of 6 Sqmm 1100V gradePVC insulated copper wire along with 1 run of 2.5 Sqmm PVC insulated copper wire for earthing, run in a 25mm dia, 2mm thick FRLS PVC conduit. Note: Outer plate for UPS socket is Black, Lighting & Raw Power is White

Laying of 2 Runs of 6 Sqmm PVC insulated copper wire along with 1 runs of 2.5Sqmm PVC insulated copper wire for earthing, run in a 25mm dia PVC conduit.The rate shall be included for laying all accessories like bends, collars, junctions boxes, clamps, GI wire/fish wire,chasing of wall,chicken mesh insertion & rough plastering etc., all complete as required.

Supply of 2 Runs of 4 Sqmm 1100V gradePVC insulated copper wire along with 1 run of 2.5 Sqmm PVC insulated copper wire for earthing, run in a 25mm dia, 2mm thick FRLS PVC conduit. Note: Outer plate for UPS socket is Black, Lighting & Raw Power is White

Laying of 2 Runs of 4 Sqmm PVC insulated copper wire along with 1 runs of 2.5Sqmm PVC insulated copper wire for earthing, run in a 25mm dia PVC conduit.The rate shall be included for laying all accessories like bends, collars, junctions boxes, clamps, GI wire/fish wire,chasing of wall,chicken mesh insertion & rough plastering etc., all complete as required.

Supply of 2 Runs of 2.5 Sqmm 1100V gradePVC insulated copper wire along with 1 run of 1.5 Sqmm PVC insulated copper wire for earthing, run in a 20 mm dia, 2mm thick FRLS PVC conduit. Note: Outer plate for UPS socket is Black, Lighting & Raw Power is White

Laying of 2 Runs of 2.5 Sqmm PVC insulated copper wire along with 1 runs of 1.5Sqmm PVC insulated copper wire for earthing, run in a 20mm dia PVC conduit.The rate shall be included for laying all accessories like bends, collars, junctions boxes, clamps, GI wire/fish wire,chasing of wall,chicken mesh insertion & rough plastering etc., all complete as required.

Supply of Single light point controlled by a 6A modular type switch with 2 runs of 1.5 PVC insulated copper wire along with 1 run of 1Sqmm PVC insulated FRLSH copper wire of 1100V grade in 2mm thick FRLS PVC conduits of min size 20mm dia. A separate neutral shall be run for each circuit. The rate shall be included for all accessories like bends, collars, junctions boxes, clamps, ceiling rose, holder switches, sockets switches, MS boxes , GI wire/fish wire etc., of approved make, all complete as required. Note:The light points controlled directly by MCB in LDB shall be considered under the Sub main/Circuit main)

Fixing of Single light point controlled by a 6A modular type switch with laying (flat/false ceiling) of 2 runs of 1.5 PVC insulated copper wire along with 1 run of 1Sqmm PVC insulated FRLSH copper wire of 1100V grade in 2mm thick FRLS PVC conduits of min size 20mm dia. A separate neutral shall be run for each circuit. The rate shall be included for mounting MS boxes , GI wire/fish wire,chasing of wall,chicken mesh insertion & rough plastering etc., of approved make, all complete as required. Note:The light points controlled directly by MCB in LDB shall be considered under the Sub main/Circuit main)

Supply of Two light points controlled by a 6A modular type switch (combined rate for two light points) with 2 runs of 1.5 PVC insulated copper wire along with 1 run of 1Sqmm PVC insulated FRLSH copper wire of 1100V grade in 2mm thick FRLS PVC conduits of min size 20mm dia. A separate neutral shall be run for each circuit. The rate shall be included for all accessories like bends, collars, junctions boxes, clamps, ceiling rose, holder switches, sockets switches, MS boxes , GI wire/fish wire etc., of approved make, all complete as required. Note:The light points controlled directly by MCB in LDB shall be considered under the Sub main/Circuit main)

Fixing of Two light points controlled by a 6A modular type switch (combined rate for two light points) with laying (flat/false ceiling) of 2 runs of 1.5 PVC insulated copper wire along with 1 run of 1Sqmm PVC insulated FRLSH copper wire of 1100V grade in 2mm thick FRLS PVC conduits of min size 20mm dia. A separate neutral shall be run for each circuit. The rate shall be included for mounting MS boxes , GI wire/fish wire,chasing of wall,chicken mesh insertion & rough plastering etc., of approved make, all complete as required. Note:The light points controlled directly by MCB in LDB shall be considered under the Sub main/Circuit main)

Supply of 16A modular type, 5-pin plug socket with suitable front plate &metal box on surface or in recess of approved make of material mounted on wall/grouted to walls, cutting, chases and necessary arrangements required as per the site condition, etc., using necessary fixing accessories like GI boxes etc., complete as required. Note: Outer plate for UPS socket is Black, Lighting & Raw Power is White

Erection, testing and commissioning of 16A modular type, 5-pin plug socket with suitable front plate &metal box on surface or in recess of approved make of material mounted on wall/grouted to walls, cutting, chases and necessary arrangements required as per the site condition, etc., using necessary fixing accessories like GI boxes etc., including inter connections, cutting the wall if required, making good the surface etc. as required complete.. Note: Outer plate for UPS socket is Black, Lighting & Raw Power is White

Supply of 6A modular type, 3-pin plug socket with suitable front plate &metal box on surface or in recess of approved make of material mounted on wall/grouted to walls, cutting, chases and necessary arrangements required as per the site condition, etc., using necessary fixing accessories like GI boxes etc., complete as required. Note: Outer plate for UPS socket is Black, Lighting & Raw Power is White

Erection, testing and commissioning of 6A modular type, 3-pin plug socket with suitable front plate &metal box on surface or in recess of approved make of material mounted on wall/grouted to walls, cutting, chases and necessary arrangements required as per the site condition, etc., using necessary fixing accessories like GI boxes etc., including inter connections cutting the wall if required, making good the surface etc. as required complete. Note: Outer plate for UPS socket is Black, Lighting & Raw Power is White

Supply of Occupancy Sensor light with Control option - vacancy, walk-through, daylight control. Range- 6m, angle- 360° Mounting height & Type : 3.0 mtr ceiling mount.

Fixing of Occupancy Sensor light with Control option - vacancy, walk-through, daylight control. Range- 6m, angle- 360° Mounting height & Type : 3.0 mtr ceiling mount.

Please Enable Macros to View BoQ information