GE/SMB/T-26/2020-21

Amount

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) from PVC/matelic conduit,on surface wiring, on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc complete all as specfied and directed.

M & L for point wiring for one light controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)(Make of 1.5 sqmm copper wire:Grandlay/SSK /RR cable and GM, PVC conduit Make: Finolex/Plaza/Kamplast).

All as per srl item No 2 above but for one fan/exhaust fan point controlled by one switch complete all as specified and directed.

All as per srl item No 2 above but for one call bell point controlled by one bell push switch complete all as specified and directed.

All as per srl item No 2 above but for one light point controlled by two way switch complete all as specified and directed.

All as per srl item No 2 above but for 3 pin 5 amps switch socket independent board complete all as specified and directed.

All as per srl item No 2 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)(Make of 2.5 sqmm copper wire:Grandlay/SSK /RR cable and GM, PVC conduit Make: Finolex/Plaza/Kamplast).

S & F for switch piano flush type single pole one way 5 amps SP complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM.

S & F for switch piano flush type two way 5 amps SP complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM.

S & F for switch piano flush type single pole, one way 6/16 amps SP complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM.

S & F for socket outlet 2in 1 ,5 pin 6 amps flush type AC 230 volts complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM.

S & F for socket outlet 2in 1 ,5 pin 6 and 16 amps flush type AC 230 volts complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM.

M & L for ceiling rose 65 x 50mm three terminals complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM .

Supply and fix bell push flush type 5 Amps complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of cona /SSK .

Supply and fixing electric bell ding-dong AC 230 Volts single pole complete all as specifed and directed,make : Havells (REO) or technocommerically equivalent make of cona /SSK .

Supply and fixing for LED smart Lamp, B22 type ,18 watt,make : Wipro or technocommercially equivalent of make :Osram/Philips/Crompton.

S & F for lamp holder/batton holder/angle holder insulated body(Metal ring) with back bakelite plate suitable for batten fittings,make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM .

Supply and fixing for decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of 18 watt ,230 volts including connecting up with three core twisted flexible copper conductor cable of 1.5 sqmm complete all as specified and directed of make :Havells ,cat part no: LHEXACP7PN1W018 or technocommerically equivalant make of Crompton/Philips. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion.

Supply and fixing for Bulk head fitting suitable for 10W ,make : Crompton ,cat part no :LBHP-10-CDL or technocommerically equivalant make of Havells/Philips/Halonix.

Supply and fixing ceiling fan regulator electronic type 5 stage speed variation,socket type is size, ISI marked complete all as specified and directed,,make : Havells (REO) or technocommerically equivalent make of Cona /SSK/GM .

S & F of sheet metal enclosures distribution boards, double door ,TPN, 415 volts 4 ways with IP-43 protection for MCBs comprising insulated copper bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCB FOUR POLE =01 No (for incoming ) (b) MCB SP 6 to 63 amps = As per load requirement 08 Nos (for outgoings) .Four pole MCBs will be paid under seperate items and SP MCBs will be included demeed is quoted rates of DB. Note :- (i) The DB shall be TPN series of Make : Schneider ,cat part no: A9HTND04 or equivalent make of L&T/ ABB /Legrand. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii) Connection of the MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .

Supply and fixing sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 08 ways complete all as specified and directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens.

Supply and fixing for MCB TPN 63 amps ,415 Volt ,'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens.

Supply and fixing for MCB SPN 63 amps 240 Volt 'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens.

Supply and fixing for MCB SP 6 to 32 amps 240 Volt 'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens.

Supply and fixing single pole and neutral enclosure with 2 pin earth plug and socket complete with one single pole MCB 20 Amp, 240 V complete all as specified and as directed,make :Hager cat part No.VYA2200 or technocommircally equivalent make of Havells/Legrand.

Taking down the unservicable /brunt sub main wiring from wooden batten or PVC conduit and M & L for submain wiring in and including PVC conduit 1.8 mm thick ,20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 4 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 4 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 4 sqmm plus one run 4 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)(Make of 4 sqmm copper wire: Grandlay/SSK /RR cable and GM

Supply and fixing GI water tubing medium grade of bore 15 mm dia with all fittings on wall complete all as specified and directed by Engr in chagre .

Supply and fixing Bib tap of 15 mm dia cast copper alloy with crutch or butterfly nuts screwed for iron pipe and fixed in 20mm bore dia pipe complete all as specified and directed by Engr-in-charge.

Supply and fixing for stop valve of 15 mm dia cast copper alloy with crutch or butterfly nuts screwed for iron pipe and fixed in 20mm bore dia pipe complete all as specified and directed by Engr-in-charge.

Supply and fixing water heater storage type ,electric ,capacity 25 lites ,BEE 5 star rated with set of hot and cold flexible connection pipe and connnecting electrically complete all as specified and directed Make: Standred, Cat Part No : Amazer-H 25 ltr white or technocommerically equivalant make of Crompton /Bajaj.

Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is included in the quoted rate. 2. Soil should be free from stone, boulders, aggregate, gravels etc.

M/S INDIAN ELECTRICAL

SIDDAHANT ENTERPRISES

M/S VERMA ENTERPRISES

Jiwan Singh