WIDENING AND STRENGTHENING WORK OF AONLA ALIGANJ GAINI ROAD IN KM. 01 TO 14 IN DISTT. BAREILLY FIN. YEAR 2024-25

Amount

Excavation for road way in soil by mechanical means including cutting and transporting the earth to site of embankment/dumping area with lead upto 1000m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Construction of granular sub-base by providing close graded material mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density,complete as per clause 401.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing, laying, spreading and compacting graded stone aggregate mixed with cement to crushed stone treated base specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.. (3.50% Emulsion + 1% Cement)

Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared granular surface cleaned with hydraulic broom .

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications

M-20 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and as per MORT&H Specification Clause 1500, 1700 & 2100.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & Concrete pump

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

Supply and Laying of RCC pipe/collar of 1000 mm dia NP-3 for culverts including pointing at ends including supply of all material, labour T&P etc, for proper completion of work.

Stoneb ballast 40mm gauge filling behind abutment, wing wall and return wall complete as per drawing and technical specification

Providing and laying of factory made 80mm thick interlocking cement concrete tiles (30mpa) including 25mm thick compacted bed of fine sand compacting and proper embedding/ laying of interlocking tiles levelling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material labour T&P etc. required for proper completion of work as directed by Engineer-in-Charge.

M/S A B INFRAZONE PRIVATE LIMITED (BID ID -4719159)

M/s Hanu Infrastructure Pvt Ltd (BID ID -4720277)

M P SINGH TOMAR (BID ID -4821725)

SHARMA CONSTRUCTION PROJECT PVT LTD (BID ID -4719356)

RAJEEV TRADERS (BID ID -4733269)

M/s Juneja Construction Pvt Ltd (BID ID -4718285)

M/s Raj Laxmi Enterprises (BID ID -4825417)

M/S R K CONSTRUCTION (BID ID -4825236)