Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹17.6 L
EMD Value
₹18,000
Closing Date
6 Nov 2026, 6:10 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Sabarkantha Irrigation Division, Himatnagar
Providing, Laying and Fixing Thermoplastic Road Marking with Reflective Road Solar Studs on Dam Crest Road and approach road of Harnav Dam of Harnav reservoir Project village-Vanaj ,ta -Vijaynagar Dist- Sabarkantha
358046
Tender Notice No 17 of 2026-27
Open
Civil Works
Works
Sabarkantha
10 documents required · 9 mandatory · 1 optional
₹900
Executive Engineer Sabarkantha Irrigation Division Himatnagar
₹18,000
23 Oct 2026
23 Oct 2026
23 Oct 2026
6 Nov 2026
23 Oct 2026
120 days
BILL OF QUANTITIES
(A) Percentage Rate Tender (Upto INR 50Cr.)
Providing, Laying and Fixing Thermoplastic Road Marking with Reflective Road Solar Studs on Dam Crest Road and approach road of Harnav Dam of Harnav reservoir
Project village-Vanaj ,ta -Vijaynagar Dist- Sabarkantha
Item No Unit Description of Item (with brief specification and reference to book of specifications) Qty Rate Amount
Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and
laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area,
thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color
1 Sqm marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be 352.35 367.720
min 100 mcd/m2/lux during the service life during the day time. The marking should meet the performance criteria for
night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warranty for
the Retro reflectivity should be two years.
Solar Stud: Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar
powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens
capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall
support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water
ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting
could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should
2 Each be current losses of less than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a 746.00 2088.680
full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not
be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm
respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for
the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and
complete as directed by the engineer
Providing and filling hot applied blown bitumen in existing expansion joints, including cleaning of joint, heating,
3 Rmt pouring and filling of approved quality bitumen, complete as directed by Engineer-in-Charge. 430.00 164.630
Rupees Seventeen Lakh Fifty-Eight Thousand Five Hundred Twelve and Thirty-Two Paise Only.
I/We am/are willing to carry out the work at……................ % above/below percent (Should Be written in figures and words) of the estimated rate mentioned above. Amount of
my/our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Inwords Inwords
The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R. :PRC-10 / 2017 Cement Consumption / 16 / C Date:11/05/2017 as stated in
S.O.R. there fore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original
item at the rate of input rate mentioned in all the tender.
Signature of Contractor Deputy Executive Engineer Executive Engineer
Vijaynagar Irrigation Sub Division Sabarkantha Irrigation Division
Vijaynagar Himmatnagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD Thermoplast Harnav dam.pdf
BOQ.pdf
PA.pdf
Tender Notice 17 of 2026-27.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .