GENERAL-Cheramangalam scheme-2023-24 Improvements to Sluice Shutters between 13/400km to 15/540km of main canal - General Mechanical Work

Amount

Dismantling existing Shutters, Hoisting Bridge, Demolishing Cement concrete manually, Form work and Concreting

OD35854/2023-2024:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting unit / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery, labour etc. complete as directed by the departmental officer at the site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60 % and unserviceable hoisting unit as 80%).

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply, Fabrication, Painting and Erection of Embedded Parts, Shutter and Hoisting Mechanism

OD35855/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges.

OD35856/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

OD35857/2023-2024:Supply of MS round bar including cost of conveyance charges.

OD35858/2023-2024:Supply of BOLT and NUT up to 300mm Length including cost of conveyance. (Data for 1Qtl)

OD35859/2023-2024:Providing EN-8 screw rod with one number of EN -8 scerw shaft, hand operation including cost of all materials, labour, hire charges and conveyance. (50 mm)

OD35860/2023-2024:THREAD LESS portion of the screw rod (per metre rate).

OD35861/2023-2024:Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc complete.

OD36154/2023-2024:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance.

OD35862/2023-2024:Fabrication and erection of Embedded parts of Canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD36155/2023-2024:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, Seal seat etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, machinery for planing, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete

OD35863/2023-2024:Fabrication and supply of Structural steel canal gate ( Less than 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD35864/2023-2024:Erection of the Canal Shutter ( Up to 2 Tonne weight )/HOISTING BRIDGE/PLATFORM including handrails, ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied.

OD35865/2023-2024:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE (Data for 1m)

P.Damodaran, G.R.Industries

Bidder Name

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries