REPAIRS TO INTERNAL ELECTRIFICATION, REPLACEMENT OF U/S LIGHT FITTINGS WITH LED LIGHTS AND COOLING APPLIANCES OF CERTIN UNITS AT SHANGUMUGHAM, MUTTATHARA AND MUKKUNNIMALA UNDER GE AF TRIVANDRUM

Amount

Repair, maintenance and making the continuity of supply after rectifying the defects of the electrical items such as light point, fan point, call bell point, socket point 5A/15A, switches, sockets, regulator, lamp holder, brackets, bell, buzzer, push button, batten, ceiling rose, pandent, any type of MCB's, DB's any type of light fixtures, any type of lamp, ceiling fan, exhuast fan, geyser, capacitor, replacement of fuse wires and all elcectrical accessories in day to day/door to door maintenance including S&F of small pieces of elctrical cable of size upto 10 sqmm single core and length not exceeding 0.50m complete all as specified and as directed. Note : Any major items required to be repaired shall be measured under relevant items of this schedule.

Note: following shall be part of job under item 1 above :- (a) The above job shall be carried out by a trained electrician having ITI in electrical, documentary proof of the education of tradesman shall be produced before commencement of work. (b) All bldg light complaints including service connection, submain & internal electric supply for OTM & Md accns in 17FBSU, OTM accn in 257SU, OTM & Md accns in AFSC Muttathara, OTM accn in 340TRU and 340TRU Dett Kudankulam shall be attended. (c) Record of complaints/complaint slip showing Qtr No, bldgs No, nature of job supported with users signature shall be prepared as per format directed by Engr-in-charge & will be deposited to concerned JE E/M within 24 hrs. (d) Necessary complaints slip/complaints register & other stationary required shall be contractor responsibility and rate of the same shall deemed to be included in the item rate.

Notes (contd)... (e) All sort of petty T&P items such as PVC insulation tape, ladder, galvanised screws, nuts, bolts, washers etc. required to accomplish the job shall be provided by the contractor with out any extra cost to dept. (f) Defective items if any, required to be replaced shall be measured and paid as supply only separately, however labour component shall be part of this item. (g) Point wiring, sub main wiring, DB's, earthing & conduit etc specifically mentioned as M&L, S&F shall be measured and paid seperately.

Notes (contd)... (h) The contractor shall maintain a record of all urgent/ routine works and if the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the Govt. (j) In case of any delay in attending the complaint more than 12 hrs after handing over routine/urgent complaints, the contractor shall be liable to pay the penalty as described in penalty clause given here as under.

Notes (contd)... (k) The penalty shall be applicable to the contractor if the delay is noticed by the Engr-in-Cahrge more than twelve hrs after handing over works of urgent/ routine nature to the contractor. The Engr-in-Charge shall handover the slip containing specification of work to the contractor by lodging the time and signature of contractor be obtained on slip. The contractor shall attend the complaint immediately and shall report to Engr-in-Charge with in 12 hrs. The contractor will keep his tradesmen in stand by for attending any routine / urgent works from the executive. If the nature of job is such that the work cannot be completed within period of 12hrs then the facts shall be brought to the notice of the GE/Engr-in-Charge and the period for the working to the complaint shall be decided by the GE/EIC. If the delay is more then twelve hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs 50/- per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 56 of IAFW - 2249 and shall be treated as interim condition of the contract and shall be enforced above as and when delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt. (l) The decision of the Accepting Officer in this regard shall be final and binding.

Supply only switch piano flush type 5 Amps 240 volts single pole one way. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only switch piano flush type 5 Amps 240 volts single pole two way. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only switch piano flush type 15 Amps 240 volts single pole one way. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only bell push 5 Amps, flush type. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only socket outlet 2 in 1 2/3 pin 5 Amp, flush type 240 volts. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only socket outlet 2 in 1 2/3 pin 5/15Amp, flush type 240 volts. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only switch socket combination outlet 2 in 1 2/3 pin 5 Amp, flush type 240 volts. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only switch socket combination outlet multipurpose 5 & 15 Amp, flush type 240 volts. Make : Anchor Model Penta Deluxe or equivalent of Havells/SSK

Supply only lamp holder PVC/Polycarbonate angular type with back plate suitable for batten fitting 230 volt, complete all as specified and directed. Make : Anchor or equivalent of Havells/SSK

Supply only ceiling rose 3 plates flush type 6 Amps, 250volts AC ISI Marked. Make : Anchor or equivalent of Havells/SSK

Supply only modular switch 1 way 6A, 1 module, Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor

Supply only modular switch 2 way 6A, 1 module, Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor

Supply only modular switch 1 way 16A, 1 module, Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor

Supply only modular type bell push 1 way 6A, 1 module, Make : Indo Asian/Legrand/SSK/Anchor

Supply only bell ding dong AC 230 Volts, Single pole. Make : Anchor/Legrand/SSK

Supply only bell AC 230 Volts, Single pole. Make : Anchor/Legrand/SSK

Supply only modular socket 6A, 2/3 Pin combined 2 module. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor

Supply only modular socket 6/16A, multipurpose 2 module. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor

Supply only modular fan regulator 120W, 2 module. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor

Supply only flame proof rotary type switch with termination box in LM6,16A single pole 250V. Make: Sudhir switch gears/ Baliga lighting equipments/ FCG Flame proof control gears

Supply only single pole and neutral sheet metal enclosure with a two pin and earth plug and socket with plug top complete with one single pole MCB, 240V, 25A, Mechanical impact strength IK 08 all as specified and directed. Make : Indo Asian/Legrand/Havells

Supply Only MCB DB, SPN 4 way, 240V double door type IP 43 protection with suitable busbar, isolated neutral bar and earth bar, mechanical impact strength IK 09 including making good the disturbed surfaces with the existing all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB DB, SPN 8 way, 240V double door type IP 43 protection with suitable busbar, isolated neutral bar and earth bar, mechanical impact strength IK 09 including making good the disturbed surfaces with the existing all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB DB, SPN 12 way, 240V double door type IP 43 protection with suitable busbar, isolated neutral bar and earth bar, mechanical impact strength IK 09 including making good the disturbed surfaces with the existing all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB DB, TPN 4 way, 415V double door type IP 43 protection with suitable busbar, isolated neutral bar and earth bar, mechanical impact strength IK 09 including making good the disturbed surfaces with the existing all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB DB, TPN 6 way, 415V double door type IP 43 protection with suitable busbar, isolated neutral bar and earth bar, meachanical impact strength IK 09 including making good the disturbed surfaces with the existing all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB SP, 'C' curve 230V, 5 to 32A, 10KA all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB SPN, 'C' curve 230V, 5 to 32A, 10KA all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB SPN, 'C' curve 230V, 63A, 10KA all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply Only MCB TPN, 'C' curve 415V, 63A, 10KA all as specified and directed. Make- Indo Asian/ Havells/ Legrand/ L&T

Supply only plug top 3 pin 5 amps AC 230 volts complete all as specified and directed. Make: Havells/ Cona/ Plaza

Supply only plug top 3 pin 15 amps AC 230 volts complete all as specified and directed. Make: Havells/ Cona/ Plaza

Supply only PVC casing caping of 15 mm (width) complete all as specified and directed. Make: Supreme/ Presto Plast/ Modi

Supply only PVC insulated and FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, 1.5 sqmm 3 core complete all as specified and directed. Make: Havells/ Polycab/ Plaza

Supply only insulation tape 25 mm width 10m long

Supply only MS machine screw 25mm long of dia not less than 5 mm complete all as specified and directed.

Supply only MS machine screw 50mm long of dia not less than 5 mm complete all as specified and directed

Supply only electronic LED driver 34/36W suitable for 2' x 2' ceiling light indoor fitting of make Philips/ Luker/ Wipro/ Bajaj as directed by Engineer-in-Charge.

Supply only electronic LED driver 25W suitable for building security light fitting of make Philips/ Luker/ Wipro/ Bajaj as directed by Engineer-in-Charge.

Supply only new energy efficient LED Box type fitting 1 x 20 watts 4 feet long CRCA body powder coated white batten type MCL LED type all prewired including twin core flexible PVC 0.5 Sqmm copper cable for connection all as specified and directed. Make: Wipro Cat Part No.LL20-221-XXX-65NE3 or equal to Havells/Phillips

Supply only new energy efficient LED Box type fitting 1 x 10 watts 2 feet long CRCA body powder coated white batten type MCL LED type all prewired including twin core flexible PVC 0.5 Sqmm copper cable for connection all as specified and directed. Make: Wipro Cat Part No.LL20-111-XXX-65NE3 or equal to Havells/Phillips

Supply only energy efficient LED building security light Fitting 25 Watts for fixing on existing brackets including twin core flexible PVC 0.5 Sqmm cable for connection all as specified and as directed. Make: Wipro Cat No.LR02-291-XXX-57-XX or equivalent of Havells/Phillips

Supply only energy efficient LED surface/recessed mount light Fitting square type 2 feet x 2 feet size 36 Watts with higher efficacy, full diffuser providing uniform light including twin core flexible PVC 0.5 Sqmm cable for connection all as specified and as directed. Make: Wipro Cat No.CRCO10SO38HP57GL1 or equivalent of Havells/Phillips

M&L in repair for point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch/bell push with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5sqmm (nominal area) 1100 volt grade cable for phase & neutral including drawn through PVC casing Caping with and including new MS/cast iron sunken boxes duly painted with two coats of anticorrosive paint over a coat of red oxide primer flush on wall and synthetic enamel paint over a coat of red oxide on other side, covered with 3mm thick plastic laminated sheet for mounting switches,regulators, sockets etc including 1.5 sqmm (nominal area) copper conductor PVC insulated, including making the surface good with the existing all as specified and as directed. Make of Casing Capping : Polycab/ Modi/ Presto Plast Make of Wire : Plaza/ Havells/ Polycab Note: Switches, sockets outlets, blanking plate, Light fittings, fans, bells & regulators shall be measured and paid separetely under relevant items of this schedule.

All as per item No. 45 here-in-before but one fan point controlled by one switch or regulator all as specified and as directed.

All as per item No. 45 here in before but for One 3 pin socket out 5 amp on the same board all as specified and as directed.

All as per item No. 45 here in before but for one switch socket outlet 3 pin 5 amps on independent board all as specified and as directed.

All as per SI No. 45 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket inependently all as specified and as directed.

M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multistranded copper conductor cable 2 runs of 6 sqmm drawn through in and including suitable size PVC Conduit and all accessories fixed to wall/floors along with 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size. Note: (a) 2 runs of 6 sqmm cable along with one run of 6 sqmm cable for earth conductor PVC Conduit shall be measured as one length (b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. Make:- Havells/Polycab/Plaza.

M&L in repair for surface point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch/bell push with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral including and drawn through PVC rigid conduit (Medium grade) with and including new MS/cast iron sunken boxes duly painted with two coats of anti corrosive paint over a coat of red oxide primer flush on wall and synthetic enamel paint over a coat of red oxide on other side, covered with 3mm thick plastic laminated sheet for mounting switches, regulators, sockets etc including 1.5sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete including making the surface good with the existing all as specified and as directed. Make of PVC conduit : Polycab/ Modi/ Presto Plast Make of Wire: Plaza/ Havells/ Polycab Note: Switches, sockets outlets, blanking plate, Light fittings, fans, bells & regulators shall be measured and paid separetely under relevant items of this schedule.

All as per item No. 51 here-in-before but one fan point controlled by one switch or regulator.

All as per item No. 51 here in before but for One 3 pin socket out 5 amp on the same board

All as per item No. 51 here in before but for one switch socket outlet 3 pin 5 amps on independent board

All as per SI No. 51 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket inependently

Taking down ceiling fan 1200mm/1400mm sweep from any height and bringing down to floor, dismantling the ceiling fan, re-assembling the ceiling fan and refixing in position after repairs. Note: Spares will be measured and paid separetely under relevant items of this schedule.

All as per Item No 56 above but for exhaust fan 300mm/450mm sweep including replacing of rusted nut and bolts as per requirement.

All as per Item No.56 above but for Pedestal/wall mounting fan 400/450mm sweep including replacing of rusted nut and bolts.

M & L for cutting & removing the burnt winding of ceiling fan of 1200/1400mm sweep and cleaning the slot, rewinding with super enamelled copper wire of suitable size, varnishing heating and insulating and reassembling the spares complete all as specified.

All as per item No. 59 above but for exhaust fan 300mm sweep.

All as per item No. 59 above but for exhaust fan 450mm sweep.

Supply only fan motor for wall mounting fan/pedestal of 400/450mm sweep

Supply only ball bearing for ceiling fan of suitable size. Make: SKF/NBC/TATA

Ceiling fan of 1200/1400mm sweep(6201/6202)

Exhaust fan of 300mm sweep

Exhaust fan of 450mm sweep

M&L for Spray Painting of following type of fans with one coat of synthetic enamel paint of same colour including preparation of old surfaces complete including numbering of fans as existing for:-

Ceiling fan of 1200/1400 mm sweep

Exhaust fan of 300/450 mm sweep

Supply only capacitor 2.5 mfd suitable for ceiling fan Make – KELTRON/KEIL/BHEL/UNIVERSAL/TIBCON

Supply only capacitor 4 mfd suitable for exhaust fan. Make – KELTRON/KEIL/BHEL/UNIVERSAL/TIBCON

M&L for Comprehensive maintenance and servicing of Fire detection system installed at the following locations at 17 FBSU, repair/ replacement of all defective and unserviceable parts as per specifications during contract period and attending of breakdown as and when intimated including necessary periodical safety checking and testing the entire system/ cleaning of detectors and attending complaints within 24 hrs including sunday/holiday and submit the service report by every quarter. Each job to be done in each quarter.

AFNET : Fire alarm panel 10 Zone ( Conventional Ravel RE 150 - 1 No. Manual call points - 2 Nos Electronic sounders - 2 Nos, Smoke/ Heat detector - 18 Nos, Response indicator - 08 Nos )

HQ,CRBN cell /FCC Old logistic Immols Server Room : Fire alarm panel ( Addressible Morley IAS CONNEXION ) - 02 Nos. Manual call points - 05 Nos Electronic sounders - 05 Nos, Smoke/ Heat detector - 12 Nos

Note for Sl No 67 .01 & 67.02 (a) The rate quoted shall be inclusive of attending complaints within 24 hours and all spares required during comprehensive maintenance period. (b) Any item that is not included in OEM AMC schedule but required at site for smooth functioning of fire alarm system, shall be paid by the contractor on this account. (c) The maintenance of fire alarm system shall be done through OEM/ authorised service provider the tenderer has to submit intent of MOU from OEM/ authorised service provider within fifteen days of acceptance of tender. (d) Contractor shall conclude AMC with OEM and copy of the agreement will be submitted to Engr-in- charge and GE before commencement of AMC

M&L for preparation of surfaces of Meter Box and applying one coat of synthetic enamel paint over one coat of red oxide Primer complete all as specified and directed.

Taking down the existing water heater from wall and refixing to same location after cleaning and painting and fixing to wall by using proper clamps and nut bolt completely all as directed by Engr-in- Charge.

S&F In repair Heating coil suitable for Geysers 1.0/1.5 KW capacity

S&F in repair Thermostat suitable for Geysers

Taking down old U/S earthing and M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron earthing lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR connected to earting test point all as specified or indiealed complete with excavation & earth work, PCC pit with 50mm thick RCC cover (grade M-15) having suitable handle (10mm MS Rod) 20mm dia GI medium grade watering pipe with GI funned with wire mesh 20mm bore GI pipe (light grade) for protection of earth lead conductor all as directed and testing on completion.

S&F in Repair Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including, 3 NOS, 8mm dia 25mm long hex, head screw complete all as specified and directed.

Supply and fixing Aluminium strip 25 x 3mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Supply and fixing GI strip 32 x 6mm thick as earthing lead fixed to wall/roofs etc all as directed.

M&L Servicing of indoor unit of split type AC of 1.5/2.0 ton capacity of any make by air blowing, cleaning the filter in water and drying in sun, cleaning of drain tray and rectifing water leak, checking and tightning the electrical connection all as directed

M & L for servicing of outdoor unit of Split type air conditioner of 1.5/2.0 ton capacity any make by compressed air and water washing and oiling of oudoor fan motor, checking and tightning of all the electrical connections, nuts, bolts, washers all as specified and as directed

M&L Servicing of indoor unit of inverter typre split AC of 1.0/1.5/2.0 Ton capacity of any make by air blowing, cleaning the filter in water and drying in sun, cleaning of drain tray and rectifing water leak, checking and tightning the electrical connection all as directed

M & L for servicing of outdoor unit of inverter typre split AC of 1.0/1.5/2.0 Ton capacity any make by compressed air and water washing and oiling of oudoor fan motor, checking and tightning of all the electrical connections, nuts, bolts, washers all as specified and as directed

M & L for painting of outdoor unit of Split type air conditioner of 1.5/2.0 ton capacity any make including preparation of old painted surface complete and painting with one coat of Synthetic enamel paint complete in position all as specified and as directed

Supply and charge of gas R-410/R32 for inverter type split AC of 1.0/1.5/2.0 Ton capacity after leak testing and rectification of leak all as specified & directed

Supply and charge of gas R22/R134a to refrigerator 165 Ltrs to 250 Ltrs after leak testing and rectification of leak all as specified & directed

All as per item No. 82 above but for refrigerator 280 to 430 Ltrs capacity

All as per item No. 82 above but for water cooler 40/80 Ltrs per hr capacity

All as per item No. 82 above but for Deepfreezer 205/405 Ltrs capacity

All as per item No. 82 above but for split type AC 1.5 Ton capacity

All as per item No. 82 above but for split type AC 2.0 Ton capacity

M&L for taking out old unserviceable capillary and stainer from refrigerator and supply and fix new capillary & stainer of any capacity all as specified and as directed

All as per item No 88 above but for inverter type split AC and split type AC 1.0/1.5 /2.0 Ton capacity

Servicing of refrigerator by air blowing, cleaning of condensor coil, rubber bedding & checking and tightning the electrical connection all as directed of capacity 165 to 430 Ltrs all as specified and as directed

Servicing of water cooler by air blowing, cleaning of condensor coil, checking and tightning the electrical connection all as directed for water cooler of capacity 40/80 ltrs all as specified and as directed

M&L for painting two coats of enamel paint of approved colour ( after scrapping the old paint , remove the rust, making the surface even and smooth) by spray painting over a coat of red oxide primer after preparation of old painted surface for refrigerator capacity 165 to 250 ltrs all as specified and directed

All as per item No. 92 above but for water cooler of capacity 40/80 ltrs

Supply & Replacing unserviceable starting capacitor with serviceable starting capacitor for deep freezer/ water cooler/ refrigerator etc of appropriate make all as specified and directed

Supply & Replacing the unserviceable running capacitor with new running capacitor for window/ split type AC 1.0/1.5 / 2.0 ton capacityall as specified and as directed

All as per item No. 95 above but for deep freezer/ water cooler etc

Remove the unserviceable thermostat and supplying and installing new thermostat for any type AC 1.5 ton capacity and testing all as specified and directed

All as per items No. 97 above, but for Deep Freezer of any capacity all as specified and directed

All as per items No. 97 above, but for water cooler of any capacity all as specified and directed

All as per items No 97 above but for refrigerator of any capacity all as specified and directed

Supply & replace timer switch for refrigerator of any capacity all as specified and directed

Supply & replace bimetal switch for refrigerator of any capacity all as specified and directed

Removing defective over load protector and supply and fixing new over load protector for Deep freezer/ refrigerator of any capacity and testing completeall as specified and as directed

Replacing defective fan motor by supplying and installing New fan motor for water cooler/deep freezer of any capacity and testing complete all as directed.

All as per items No 104 above, but for window type AC 1.5 Ton capacity all as specified and directed

All as per No 104 above but for outer unit of split AC 1.5/2.0 Ton capacity all as specified and directed

All as per No 104 above but for outer unit of inverter type split AC of 1.0/1.5/2.0 Ton capacity all as specified and directed

All as per No 104 above but for inner unit of split AC of 1.5/2.0/3.0 Ton capacity all as specified and directed

All as per No 104 above but for inner unit of inverter type split AC of 1.0/1.5/2.0 Ton capacity all as specified and directed

All as per No 104 above but swing motor of split AC 1.5 /2.0 Ton capacity all as specified and directed

All as per No 104 above but swing motor of inverter type split AC of 1.0/1.5/2.0 cap all as specified and directed

Supply and fix in repairs BLDC fan motor suitable for split AC 1.5/2.0 ton all as specifed and directed

Supply and fix in repairs BLDC fan motor suitable for inverter type split AC of 1.0/1.5/2.0 ton all as specifed and directed

M&L for rewinding of defective outdoor unit fan motor of split type AC 1.0/1.5/2.0 ton capacity any capacity and testing complete all as directed.

Supply and replace electronic control PCB for split type AC 1.0/1.5/2.0 ton capacity of existing make all as directed

Supply and replace electronic control PCB for window type AC of 1.0/1.5/2.0 ton capacity of existing make all as directed

Supply and replace electronic control PCB for refrigerator of any capacity and existing make all as directed.

Supply and replace sensor / anti ice thermostate for split type AC of any model all as directed.

Supply and replace remote unit for split type AC of any model all as specified and directed

Supply and replace remote battery 1.5 Volts for split type AC of any model all as specified and directed

supply and fix in repairs compressor suitable for split type AC 1.5/1.5/2.0 Ton capacity by removing unserviceable compressor after cutting the refrigerant line including supply and fixing new hermetically sealed compressor unit suitable to operate on 230 volt AC including connecting back the suction & discharge refrigerant lines, vaccumising charging of refrigerant testing and commissioning for smoot functioning all as specified & directed.

All as per item No 121 above, but for inverter type split AC of 1.0/1.5/ 2.0 Ton capacity all as specified and directed.

All as per item No 121 above, but for water cooler 40/80 & 80/120 Ltrs/ hr capacity all as specified and directed

All as per item No 121 above, but for Refrigerator of capacity 165 to 250 Ltrs all as specified and directed

All as per item No 121 above, but for refrigerator 280 to 430 Ltrs capacity all as specified and directed

Supply and fix float valve 15 mm dia suitable for water cooler/ cooling tower etc. all as specified and directed

Supply and fix push tap CP brass, 15 mm suitable for water cooler of any capacity all as specified and directed

Material and labour for repair of voltage stabilizer after removing the burnt out unserviceable winding cleaning the slots, insulate properly and rewinding transformer including testing of capacity 5 KV, single phase, 230 V AC, 50 Hz all as specified and directed

All as per item No 128 above, but of capacity 3/ 2/ 1/ 0.5 KVA all as specified and directed

Material and labour for repair of voltage stabilizer by replacing time delay relay /main relay unit of voltage stabilizer with new of capacity 5 KVA, 4KVA including testing complete all as directed.

All as per item No 130 above, but of capacity 3/ 2 /1/0.5 KVA all as specified and directed

Supply and replace service valve for split type AC of 1/4" Size all as specified and as directed

Supply and replace service valve for split type AC of 1/2" Size all as specified and as directed

Supply and replace service valve for split type AC of 5/8" Size all as specified and as directed

Supply & replace condenser unit for split type AC 1.5/2.0 ton capacity all as directed.all as specified and as directed

Supply & replace condenser unit for inverter type split AC of 1.0/1.5/2.0 ton capacity all as directed.all as specified and as directed

Supply & replace outer body kit for split type AC of 1.5/ 2.0 ton capacity suitable for condensor coil and fan motor complete all as specified and directed. Note: condensor coil and fan motor shall be measured and paid separatly.

Supply and replace copper pipe 1/4"all as specified and as directed

Supply and replace copper pipe 1/2"all as specified and as directed

Supply and replace flair nut 1/4"all as specified and as directed

Supply and replace flair nut 1/2"all as specified and as directed

Supply & replace drain PVC pipe for split type AC any capacity all as directred.

Supply and replace PC Board of indoor for inverter type split AC of 1.0/1.5/2.0 ton capacity of existing make all as directed

Supply and replace PC Board of outdoor for inverter type split AC of 2.0 ton capacity of existing make all as directed

Removing of Split type AC 1.5/2.0 ton capacity after pumping down gas from position, refixing to position along with new copper pipes of required length and charging of gas in compressor after rectifing leak and rat cutting complete all as directed.

Supply & replace MS/GI bracket for fixing of outer unit of Air conditioners of capacity 1.5 ton/2.0 ton all as specified and as directed

Supply and replace Metal plug and socket with TPN / TP of MCB 40/32 Amps and steel enclosureall as specified and as directed

Supply and replace Metal plug and socket with MCB 20 Amps and steel enclosureall as specified and as directed

Supply and replace MCB SP 5 to 30 Amps 230 Vall as specified and as directed

M&L for sub main wiring surface/ concealed type including cutting chases and making good in CM 1:3 complete with (2 runs of 4 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth continuity) 1100 Volts grade PVC insulated unsheathed single core multistranded cable FRLSH grade with copper conductor confirming to IS 694 drawn in conduit including provision of suitable dia PVC rigid conduit (medium grade) with conduit accessories such as bends, elbows, saddles all as specified and as directed.

Supply and replace thermocool insulation for copper pipe for split type AC of any type and capacity all as specified and as directed

Supply and replace unserviceable fan blade of outdoor unit fan motor of split type AC 1.0/1.5/2.0/ 3.0 ton capacity with new fan blade all as specified and directed.

Inspection, checking adjustment and minor repair of unserviceable spilt type AC any type of capacity placed at any location including repair/replacement of defective parts such as checking of electrical connection, condenser, gas leakage, PCB, fan blade, indoor unit, outdoor unit, compressor, PVC pipe etc, complete all as specified and as directed by Engineer-in-Charge. Note : Repair/replaement of unserviceable parts shall be measured and paid separately .

VISHNU

CHITHRANI TRADERS