New Construction work at Dhakiya to Naugawan Gautiya road via Naugawan in Distt Bareilly in financial year 2026-27

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5.including supply of all meterial T&P, labour and all taxes etc. But excluding GST for proper completion of the work as per direction of Engineer in charge. (Exculding Royalty.) (Ch. 0.000 to 3.700 Km)

Providing laying and spreading material on a prepared sub grade, adding cement @ 2% by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base as per Technical specification clause 405 including supply of all meterial T&P, labour and all taxes etc. But excluding GST for proper completion of the work as per direction of Engineer in charge. (Ch. 0.000 to 3.700 Km)

Providing laying and spreading material on a prepared sub base, cement @ 4% by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base as per Technical specification clause 405 including supply of all meterial T&P, labour and all taxes etc. But excluding GST for proper completion of the work as per direction of Engineer in charge. (Ch. 0.000 to 3.700 Km)

Providing and applying tack coat with Bitumen (VG-10) using Bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. (Including cost of Bitumen VG-10) (Ch. 0.000 to 3.700 Km)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type as per Technical Specification Clause 508) (Including cost of Bitumen VG-10) (Ch. 0.000 to 3.700 Km)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. (Including cost of Bitumen VG-10) (Ch. 0.000 to 3.700 Km)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads transporting to site spreading grading to required slope and compacted to meet requirement of table 300.2 (Excluding Royalty) including supply of all meterial T&P, labour and all taxes etc. But excluding GST for proper completion of the work as per direction of Engineer in charge. (Ch. 0.000 to 3.700 Km)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m as per Technical Specification Clause 302.3 (Excluding Royalty) including supply of all meterial T&P, labour and all taxes etc. But excluding GST for proper completion of the work as per direction of Engineer in charge. (For Retaining wall Ch. 3.500 to 3.600 Km, Ch. 3.200 to 3.360 Km & For 1000 mm dia culvert Ch. 0.100 Km, 0.200 km, 3.200 Km, 3.500 Km, For 600 mm dia culvert Ch. 0.700 Km, 1.350 Km, 1.705 km, 2.100 Km, 2.720 Km

Providing concrete for plain/reinforced concrete in 1:3:6 open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 including supply of all meterial T&P, labour and all taxes etc. But excluding GST for proper completion of the work as per direction of Engineer in charge. (For Retaining wall Ch. 3.500 to 3.600 Km, Ch. 3.200 to 3.360 Km & For 1000 mm dia culvert Ch. 0.100 Km, 0.200 km, 3.200 Km, 3.500 Km, For 600 mm dia culvert Ch. 0.700 Km, 1.350 Km, 1.705 km, 2.100 Km, 2.720 Km

Brick masonry work in cement mortar in 1:3 foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 including supply of all meterial T&P, labour and all taxes etc. But excluding GST for proper completion of the work as per direction of Engineer in charge. (For Retaining wall Ch. 3.500 to 3.600 Km, Ch. 3.200 to 3.360 Km & For 1000 mm dia culvert Ch. 0.100 Km, 0.200 km, 3.200 Km, 3.500 Km, For 600 mm dia culvert Ch. 0.700 Km, 1.350 Km, 1.705 km, 2.100 Km, 2.720 Km)