Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹72,730
Closing Date
9 Oct 2026, 6:00 pm
GE NAVY PORBANDAR
GE Navy Porbandar Tija Mile Porbandar
SPECIAL REPAIRS TO GARAGE DOORS AND MESH DOORS IN NOFRA AT NAVAL BASE PORBANDAR UNDER GE NAVY PORBANDAR
2026_MES_790098_1
9383/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
GE NAVY PORBANDAR
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
GE NAVY PORBANDAR
₹72,730
Yes
18 Sept 2026
18 Sept 2026
10 Oct 2026
18 Sept 2026
9 Oct 2026
3 Oct 2026
18 Sept 2026 - 2 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down shutters of any descriptions, area exceeding 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and directed by Engineer-In-Charge. | 447 | Per Leaf | - | - |
| 2 | S&F Factory made 35 mm thick,2nd class hard wood (Hollock), gauged and skeleton shutters open rebated and prepared to receive gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified. | 708.05 | Sqm | - | - |
| 3 | S&F 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. | 894 | Each | - | - |
| 4 | S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed. | 447 | Each | - | - |
| 5 | S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified. | 447 | Each | - | - |
| 6 | S&F 100mm Butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified. | 1,341 | Each | - | - |
| 7 | M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 1,132.88 | Sqm | - | - |
| 8 | S&F aluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with aluminium wire staples, complete all as directed. | 1,003.16 | Sqm | - | - |
| 9 | Taking down and repair to steel gate of garrage/entrance shutter each etc of size exceeding 2 Sqm by taking down and (welding work of heavy duty pintol hinge 4 Nos for each shutter), Cleats, as required at site etc complete all as specified and as directed by Engineer-In-Charge. Note: Welding work will be carried at site by arrangement of welding machine without any extra cost. | 96 | Each job | - | - |
| 10 | Taking down and Repair to steel gate shutter of area exceeding 1.00 Sqm but not exceeding 2.00 Sqm by taking down and (welding work of heavy duty pintol hinge 3 Nos for each shutter), Cleats, as required at site etc complete all as specified and as directed by Engineer-In-Charge. Note: Welding work will be carried at site by arrangement of welding machine without any extra cost. | 60 | Each job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
9383_Gen_Page.pdf
Tender Documents • 1.12 MB
BOQ_885702.xls
BOQ • 1.97 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .