04 /EE/PMD/PHED OF 2024-2025/Sl1

Amount

Supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS: 8034 (and as amended thereafter) with standard MOC for potable clear col water and BEE 3 Star or above rated. The pump shall be directly coupled with a continuous rated 2-pole suitable wet type vertical squirel cage induction motor conforming to IS: 9283 (and as amended thereafter), suitable for operation in AC Three phases 415 V, 50HZ, suitable for DOL starter (category B motor) (Make: Approved Vendor list of PHED) Discharge: 2.0 m3/hr. Head: 154 Mtr

Discharge: 3.0 m3/hr. Head: 139 Mtr.

Discharge: 4.0 m3/hr. Head: 84 Mtr.

Discharge: 4.0 m3/hr. Head: 149 Mtr.

Discharge: 4.0 m3/hr. Head: 114 Mtr.

Supply and delivery of 1.1KV grade 2.5 sq.mm x 3 core water proof flat submersible cable IS 694:2010 for above submersible pump. (Make: Approved Vendor list of PHED)

Supply and delivery of 1.1KV grade 4 sq.mm 3 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part 1) 2011 with Up To Date Amendments. (Make: Approved Vendor list of PHED)

Supply and delivery of the following pipes, valves and gauges etc at site:- 3 mtr long 40 mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

40 mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

40 mm dia. GM Globe valve ISI Screwed End

40 mm dia. GM Check non return valve ISI Screwed End

40 mm dia. GI Elbo

40 mm dia. GI Tee

40 mm GI Nipple

40 mm x 32 mm GI reducer

Supply, fitting fixing of at site fabricated top cover suitable for tube well made of 10 mm thick MS plate with suitable hole for entry of 40 mm dia column pipe and 32 mm GI pipe for cable protection including supply of all 40 mm dia short pieces, MS flange, Socket, Enlargers and 32 mm dia all fittings short pices GI pipe with tube well as per required to complete the job.

Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

Making suitable size Tubewell with valve cover foundation guard 1000 mm x 1000 mm as required dimension with supplying of necessary cement, brick sand and stone chips including plastering and net cement finish complete masonery work and hinge MS fabricated top gate with locking arrangement as per direction of EIC.

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Supply & Making necessary pvc Schedule 80 pipe (dia of pipe not less than 32mm) protection for submersible cable from kiox box to submersible pump-motor set including supply of all specials and complete the job.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable upto 3/4 core 4 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of power cable from starter & cable protection pipe as required and all to complete the job including all connection with MCC panel & testing commissioning as per direction of EIC.

Add GST @ 18%

Add CESS @ 1%

NUPUR CHANDRA HALDER (BID ID -5464642)

RABINDRA NATH KHAN (BID ID -5464712)