NIT NO. 21 ITEM NO. 09

Supply of sub. P/Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained shorted Type impeller. The pump will be directly coupled to required wet type Induction Motor of speed 2900rpm suitable for operation on 3 phase 415 volt 50c/s., AC supply. Discharge:-200 LPM, Head: - 90 Mtr., OD:-150 mm, 7.5 HP/10 Stage Make:BS / SU / Cromp / Approved make of DJB HSN CODE:- 8413

Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 50 mm wide M.S.Plate for holding the Pipe of 50 mm dia. HSN CODE:- 7307

Supply-Of G.I. Pipe 50mm dia, Medium-class, each of 3±3'' Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange.Make of Pipe: Jindal / TATA. HSN CODE:- 7308

Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make: Finolex / Havells/CCI HSN CODE:-8544

Supply-Of G.I. Bend 90o x 50 mm dia, having Flange at both-ends. HSN CODE:- 7307

Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality. HSN CODE:-7318

Supply-Of Rubber-packing for 50mm dia Flange. HSN CODE:-4008

Supply of canvas hose pipe 50 mm dia 30 Mtr long.Make-Jyoti/ISI SOR 22-22.3.1

Supply-Of Bore-Cover Plate of Size: 200 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 50 mm dia in center with Locking arrangement by Nuts & Bolts. HSN CODE:- 7307

Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe: Jindal / TATA. HSN CODE:- 7307

S/o submersible pump set fitted with dynamically balanced EP impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on three phase AC, 415 volts ,50Hz, 5 HP, Head-70-109-122Mtrs, Discharge-200-130-100LPM. MAKE:BS/KSB/Crompton/DJB APPROVED

S/o PVC insulated flat submersible cable with copper conductor having three core Size 2.5 sq mm 1100 volts(100mtr per roll). Make- Gloster/Universal/Havells/DJB Approved

S/o G.I Pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. Make- Jindal/TATA.

S/o G.I Tail piece 40mm dia 600mm long medium class with threaded externally on both end. Make- Tata/Jindal

S/o GI Socket 40 mm dia with threaded internally. MAKE: Jindal/Tata/DJB Approved

S/o GI elbow with both end having thread, Size- 40mm. MAKE: Jindal/Tata/DJB Approved

S/o GI reducer having thread on boyh end, Size: 50mm to 40mm. MAKE: Jindal/Tata/DJB Approved

S/o GI Union having thread on both end, Size: 40mm. MAKE: Jindal/Tata/DJB Approved

S/o MS clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc.

Supply of MS bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center.

Installation of submersible pump set with pipe and other accessories, Connection of cable, installation of electric panel, Grouting of electric panel digging and fixing the same with the help of CC and laying of GI pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E&M equipment on No load and full load conditions as per standard and full satisfaction of engineer-in- charge. This is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid.

Raj Engineering Co.

MITTAL TRADING COMPANY

Super System Engineers