03 x PERIMETER SECURITY FENCE THE AOR OF CIF (R) (JOB-6643)

For Jaranwali Gali/Keri (Quantity may vary at time of placement of supply order).

LAIP 'A' type (Y shaped) Angle Iron Picket 4.21M long (V Portion 2x0.75M+chain link fence 2.10M + below GL 0.45M + cleat 0.16M) 'Y' type (75x75x6mm) weight approx 28.628Kg with 06 Nos holes of size 12mm dia on one side for fixing of chain link fencing with flat iron and 12 notches (6+6) of both side "V" portion suitable for fixing of barbed wire all as per IS808. Re-affirmed 1990 (Amdt -I) including drilling welding and cutting of holes completed. Picket shall be painted a coat of red oxide primer. MAKE : SAIL/TATA/JINDAL

MS flat of size 40x6mm length 2.10M long 1.88Kg/m having section as per IS 1731:1971 having predrilled 06 Nos holes of 12mm dia (as same distance at "Y" type picket) structural steel members shall be conforming to Fe-290 Gde E-165. MAKE: SAIL/TATA/JINDAL

Barbed wire 2.24mm dia minimum length of 450m in 50 Kgs of roll. Galvanized Barbed wire shall be of 2 strands conforming to IS 278-1978. It shall consist of 2 line wires of 2.24mm dia 2mm with dia barbs at 75mm centre to centre. The barbs shall have a length not less than 13mm and not more than 18mm with sharp pointed edges. The line and point wires shall be circular in section. Free from scales and other defects and shall be uniformly galvanized. The lines wire shall not contain any welds and should be continuous.

Chain link fence shall be fabricated using hot down GI wire of dia 4mm and size of mesh 50x50mm including two line wire (at Top & bottom) ISI marked conforming to IS : 2721-2003

MS nut and bolt 10x50mm with two washer of 3mm thickness shall be conforming to the relevant requirements given in the following IS specifications. (a) IS 1363-2002. (b) IS 1367 (Parts 1 to 20). (c) IS 6639-2005

Punched tape concertina coil: 1050mm dia punched type concertina coil (incl spike and handle) with a spiral of 50 turns having a 2.6mm dia core wire of high carbon spring steel of high tensile strength having series of sharp barbs punched all long the length on both the side of strips at regular interval. The punched tape and the core wire formed into a coil are electro galvanized to provide protection against outdoor exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil, the individual turns of the coil are connected to each other by steel clips, so that it can be opened up like an accordion. The width of barbed is 9mm and spacing of clips is 23.5mm to 24.5mm C/C. Two handles and one spike will be provided at each side of the spiral to facilitate ease of handling and anchoring of the coil to ground. The length of the coil when opened up will be 15m with an effective height of 915mm. The punched tape concertina coil consist of various components like punched tape, spring steel, coil wire. Clip handle and spike. The punched tape concertina coil including handle and spike, weight approximately 15.2 kg (+/-) 5% tolerance per coil. Coil will be wound with bituminized hessian cloth to provide protective packing and Ord pattern as per specification No IND/ENG/ PROV/ 1245/B (Except Clause 11 & 12) for raw material and drawings IMGA 0112/B (Sheet 1&2), IMGA 0112/C (Sheet 2 of 2), IMPD 1817/B, IMPD- 1821/B and IMPD 1822/B.

MS round bar 03 Nos 10mm dia 4.10M long weight @0.617Kg/Rm with eyelets at both ends 50-60mm long for fixing top, middle and bottom for fastening as per IS 1732-191 Bar shall be painted with a coat of red oxide primer

Painting Mtrls (a) Synthetic enamel paint of OG colour 1st quality conforming to IS 2932-2003. Make ASIAN Paint/Nerolac/Shalimar/Berger

(b) Thinner. Make : ASIAN Paint/Nerolac/Shalimar/Berger

(c) Paint Brush 4" Make : Super Horse/Horse Gold/Horse 7/Kirpal

(d) Paint Brush 3" Make : Super Horse/Horse Gold/Horse 7/Kirpal

(e) Paint Brush 2" Make : Super Horse/Horse Gold/Horse 7/Kirpal

Errection Tools. Two set errection tools will be provided for 3.00 Km fencing (with following items for one tool set) (a) DE spanner ring type all size. Make Hira/Taparia/Eastman - 01 Set (b) Hand gloves leather stretchable with woolen inner first quality - 15 Pairs (c) Adjustable spanner with Dip insulation drop forged steel of size 12 inch. Make Taparia/Hire/ Eastman- 02 Nos (d) Brick Trowel - 04 Nos (e) Mortar Pan - 04 Nos (f) Measuring Tape 15M long PVC. Make Hira/Freemans - 01 Nos (g) Shovel with plastic handle and plastic "D" grip and carbon steel Blade Make : Hira/Taparia/Eastman - 02 Nos (h) Axes Picks 3.0 Kgs for digging with wooden handle Make Hira/Taparia/Eastman - 02 Nos (j) Plier cutting 200mm for Barbed wire conforming to IS - 5067 Make : Hira/Taparia/Eastman - 02 Nos (k) Hacksaw frame with Blade Pin type : Make Hira/Taparia/Eastman - 02 Nos (l) Hacksaw Blade double side cut - 40 Nos (m) Fence cutter with sleeve, heavy duty Make : Hira/Taparia/Eastman - 01 No (n) Digging round crowbar with round head of size 1500mm long 28mm dia with sharpened chisel End Make : Hira/Tata/Eastman - 02 Nos (o) Y pole made of 20mm dia MS pipe medium grade. 1.58Kg/M as per IS specification 2M long (Vertical length Y Pole shall be 1.7M & inclined length 0.3M at a angle 45 Degree) - 02 Nos

K C MECTEC

GLOBAL ENGINEERING ENTERPRISES