NIT NO. 24 ITEM NO. 01

Supply of vacuum pump D.V. 40 bronze impeller C-40 shaft with gland packing with 5 HP horizontal foot mounted induction motor suitable for operation of 415 +- 10% 3 phase 50 Hz +- 5 % supply with F glass insulation for ambient to IS 325 and coupled with tyre coupling with M.S. Guard and suitable M.S. Fabricated base frame with alignment of motor and vacuum pump set complete. Make: Kirloskar/ABB / DJB approved make.

Supply of 40 mm dia GI pipe medium class

Supply of 20 mm dia G.I pipe medium class

S/o GI union 40mm Make: - unik Sant/Leader/DJB approved make.

S/o GI Elbow 40mm Make: - unik Sant/Leader/DJB approved make.

S/o GI socket 40mm Make: - unik Sant/Leader/DJB approved make.

S/o GI Tee 40 mm GI tank nipple Make: - unik Sant/Leader/DJB approved make.

S/o GI union 20mm Make: - unik Sant/Leader/DJB approved make.

S/o GI Elbow 20mm Make: - unik Sant/Leader/DJB approved make.

S/o GI socket 20mm Make: - unik Sant/Leader/DJB approved make.

S/o GI Tee 20 mm Make: - unik Sant/Leader/DJB approved make.

Supply of 40 mm dia G.M. gate valve screwed in bonnet inside screw non rising stem. Make: - unik Sant/Leader/DJB approved make.

Supply of 20 mm dia G.M. gate valve screwed in bonnet inside screw non rising stem. Make: - Sant/Leader/DJB approved make.

Fabrication of MS structure with 4 nos I beam MB125 of 4 mtr long vertically for supporting the platform in clear space 2 mtr MS beam to beam or as per availability of site space. Fabrication of plateform frame by 4 nos 2 mtr long MS I beam welded on the top of vertical beam therefter welding the 4 nos MS Tee iron of size 50X50x6mm, 2mtr long welded in between the frame and 8 nos MS angle iron of size 50x50x6mm 4 mtr long welded in cross of giving strength to vertical I beam and 4 nos MS Plates of size 300 x 300 x 8mm welded in the bottom of I beam for grouting. Providing and welding of MS Sheet of size 2000x2000x2mm welded at the top of plateform for proper supporting the water storing tank i/c painting the complete structure with red oxide primer and black enamel paint.

S/o ISI marked PVC water storage tank Double layred round shape of 2000 ltr capacity . Make- Polywell/SPL/Vectus/Ganga/ISI/DJB approved

Installation of complete charging set with motor with coupling guard and base frame complete with civil work for fitting of charging set & motor the 40 mm dia G.I. pipe & gate valve and 20 mm dia G.I pipe charging set to storage tank with required elbow union & socket 40mm dia 20mm dia as per site requirement and the 1000 liters capacity storage tank make:- Sintex / and testing on full load complete at site

Providing/Fixing of S.S. pressure gauge having range 0 to 100 psi and 150 mm dia including pipe fittings, bib cock etc. Make: H Guru, Fibeg, DJB approved make

Supply of M.S. Nut bolt & Washer of off size.

Supply of Neoprene Rubber sheet.

Painting the complete pipeline, motor, pumpsets,nrv, sluice valves etc with two coats of anti- corrosive paint as per directions of engineer in charge.

Testing & commissioning of above system first at NO LOAD & then at ON LOAD and for its proper operating as per the satisfaction of engineer in charge.

GOGIA BROTHERS