CERTAIN REPAIRS TO JOINERY, FLOORING, PLASTERING, WATER PROOFING TREATMENT, PLINTH PROTECTION AND MISC B/R WORKS TO CERTAIN BUILDINGS AT OKHA UNDER GE NAVY PORBANDAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing, rubbish off the premises complete all as specified and directed.

Non skid Ceramic coloured Joint free tiles of size 300 x 300 x 7mm thick as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 20mm thick bedding layering cement mortar (1:4) complete all as specified.

Non skid Ceramic coloured Joint free tiles of size 400 x 400 x 8mm thick (area of each tile exceeding 0.11 Sqm but n.exc. 0.18 Sqm) as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick bedding layering cement mortar (1:6) complete all as specified.

Vitrified Ceramic tiles 10 mm thick, Light shade coloured (square/ rectangular) (double charged) area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured epoxy grout to match , over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Vitrified Ceramic tiles 10 mm thick (square / rectangular) area of each tiles not exceeding 0.36 sqm (double charged) as in skirting set and jointed in neat cement slurry and pointed in coloured epoxy grout to match, over and including rendering 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

Glazed ceramic tiles, coloured (light colour as approved) of size 300 x 600 x 7 mm / 450X 350X 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry bedded in any mortar complete all as specified.

Marble tiles (Baroda/ Udaipur green) 18 to 20mm thick machine cut as in flooring, including 20mm thick screed bed in CM 1:4, jointed and pointed with grey cement slurry and pointing with white cement (1:3) using marble dust with admixture of pigment to match with shade cutting and polishing complete all as specified and directed.

20 to 25 mm thick Kota stone slab of Ist quality, Machine cut, table rubbed and polished as in flooring laid over and including 20mm thick screed bed in cement mortar (1:4) set & jointed in grey cement slurry mixed with pigment to match shade of slab, including rubbing grinding and mirror polishing complete all as specified and directed.

20 to 25 mm thick Kota stone slab as in skirting laid over and including 15mm thick screed bed in cement mortar (1:6) set & jointed in grey cement slurry mixed with pigment to match shade of slab, including rubbing grinding and mirror polishing, complete all as specified and directed.

20mm thick Granite of Ist quality, table rubbed and polished as in steps, jambs, pillars, window-cill, cooking platform, working table and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including rendering 10 mm thick in cement mortar 1:3 complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floor and paving in any position below or above ground level complete all as specified and as directed.

75mm thick PCC 1:3:6 , type C-1 using 20mm graded stone aggregate as in plinth protection finished even & smooth without using extra cement making 10mm wide joints at every 3m interval and at every corner, filled with mixture of bitumen and sand (1:1) complete all as specified.

Forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade 'A' complete all as directed.

PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete or as in sub base (75 mm thick) complete all as specified and directed.

PCC 1:2:4 type B2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Glass diving strips 3mm thick, 38mm wide inserted in position, conforming to design complete all as specified and directed.

Chequered cement concrete coloured tiles ( grey cement mixed with pigment) 20cmx20cmx25mm thick set over & including 20 mm thick bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified.

60mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of complete (with grey cement and pigment) over 50 mm thick sand coushioning complete all as specified and directed.

Factory made kerb stone of M-25 grade cement concrete of size not less than 20cm (Ht) x 10cm (thickness) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever directed complete all as specified.

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Rendering 10 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick on fair faces of brick work or concrete surfaces as on ceiling surface, facia and projection of slabs, and window projection, in CM 1:3 finished even and smooth without using extra cement complete all as specified.

Rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:4 finished even and smooth without using extra cement including mixing Integral Water proofing treatment complete all as specified and as directed. Note : Water proofing compound will be paid separately)

Supply only integral water proofing compound. Note : Water proofing treatment shall be used as per direction of Engineer In Charge and to be used in proportion as per Manufacturer's recommendation.

Prepration of newly plastered surfaces of wall and applying one layer white putty to make the surfaces even & smooth and applying two coats of water based distemper over a coat of primer complete all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls, soffits & facias roof and applying two coats of weather proof Acrylic based exterior emulsion paint over a coat of self primer (100% Acraylic) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, PVC boards etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as spd and directed by Engineer in charge.

Mineral fibre false ceiling made out of 600x600x15 mm thick ceiling board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63 mm and cross tee of size 23.50 x23.50x0.63 mm and angle size 19x19x0.63 mm including 4 mm GI wire for suspending, bolts, necessary washers, nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr- in- Charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specfied and directed.

Preparing new surfaces of seamless ceiling and applying two coats of water based distemper over a coat of primer complete all specified and as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling including fixing to wall to make PVC Frame as per specification and as directed complete all specified and as directed.

Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet (approved color and shade) inclusive of solvent cement and fixing to PVC frame as per specifications and as per manufacturer's recommendations and complete all specified.

Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I including dismantling of existing tank of any description, capacity complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I including dismantling of existing tank of any description, capacity complete all as specified and directed.

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete artilcles and precast concrete block walling complete all as specified and directed.

Stone masonry walling or squared walling in cm 1:6, brought upto courses using dressed same size Porbandar stone of superior quality complete all as specified and directed.

Fixing only PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and directed.

Fixing only Brass chromium plated shower rose 100mm size and 15mm dia with swivel joint and arm including fixing to steel pipe or union complete fixed in repair complete all as specified and directed.

Fixing only Bib tap ,brass 15mm bore, concealed type with capstan head chromium plated, with wall flange, fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repair complete all as specified and directed.

Fixing only Pillar tap brass 15mm bore, with capstan head chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Fixing only Health faucet for EWC complete set including flexible pipe superior quality in repair / replacement complete all as specified and as directed.

Fixing only 15mm dia bore angle cock fancy type screwed both ends high pressure fixed in repair / replacement complete all as specified and directed.

Fixing only 15mm dia stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch, screwed at both ends for iron pipe or for unions fixed in repair / replacement complete all as specified and directed.

Fixing only Fancy type stainless steel soap dish,fixed to plugs with chromium plated brass screw fixed in repair / replacement complete all as specified and directed.

Fixing only Toilet paper holder, brass chromium plated fixed to walls with brass screws fixed in repair / replacement complete all as specified and directed. Note for item No. 37.00 to 45.00 :- The item / fixtures opened / taken out while repairs will be reused after cleaning and the rate of clening is demmed to be inclusive in the quoted rate.

Cantilever MS bracket suitable for wash hand basin and sink fixed in repair / replacement complete all as specified and directed.

Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe fixed in repairs / replacement complete all as specified and directed.

Vitreous china white squatting pan Orissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints fixed in repair/ replacement complete all as specified and as directed.

Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including waste pipe, brass coupling, 32 mm bore chromium plated brackets restoring all connections fixed in repairs / replacement complete all as specified.

Vitreous china (White) half stall urinal with grating, union for discharge pipe, spreader, incl 40mm dia PVC heavy duty waste pipe upto floor trap, fixing with brackets, flush pipe, union for discharge pipe, connection pipe , Incl fixing in Urinal spreader and restoring connection fixed in repair / replacement complete all as specified and as directed by Engineer in Charge

15mm bore bib tap fancy type cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe fixed in repair / replacement complete all as specified and directed.

32mm Waste fittings, brass, chromium plated suitable for stainless steel sinks, basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair / replacement complete all as specified and directed.

32mm Waste fittings, brass, chromium plated suitable for stainless steel sinks basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair / replacement complete all as specified and directed.

PVC connections 15mm size 600mm long with PTMT nuts fixed in repair / replacement complete all as specified and directed.

Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for Anglo indian/European type WC fixed in repair / replacement complete all as specified and directed.

Low density polyethylene pipes 32 mm dia as in waste pipe suitable for WHB/ Sink fixed in repair / replacement complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for 25mm bore pipe (Minimum weight-455gms) fixed in repair / replacement complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for 32mm bore pipe (Minimum weight-455gms) fixed in repair / replacement complete all as specified and directed.

HDPE PVC lid (cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank fixed in repair / replacement complete all as specified and directed.

CP brass wall mixer for mixing hot & cold water screwed down for iron pipe fixed in repair / replacement complete all as specified and directed.

Grating square 150 mm size of PTMT openable type (Minimum weight 100gms) fixed in repair/replacement complete all as specified and directed.

Fancy type Chromium plated towel rail, 20mm dia, D type, 60cm long between flanges fixed in repair / replacement complete all as specified and directed.

Stainless steel curtain rod 25mm dia, superior quality, fixing with side brackets, end caps and fixed with PVC rawl plugs & steel screws fixed in repair / replacement complete all as specified.

Mild steel powder coated decorative type brackets / socketscurtain rod 25mm dia, superior quality fixed in repair / replacement complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

PVC (SWR) pipe 110mm bore single socketed of pressure rating 6kgf/cm2 with rubber ring joint fixed to walls including mild steel stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and buts and securing ends of stays to wall or roof surface complete all as specified and as directed.

PVC (SWR) pipe 75mm bore single socketed of pressure rating 4kgf/cm2 with rubber ring joint fixed to walls including mild steel stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and buts and securing ends of stays to wall or roof surface complete all as specified and as directed.

110mm bore PVC (SWR) bends , single / double 'Y' or 'T', with access doors, any radius including fixing clips fixed in repair / replacement complete all as specified and as directed.

75mm bore PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius including fixing clips fixed in repair / replacement complete all as specified and as directed.

110mm bore PVC (SWR) Junction (single 'T') equal or unequal with access doors, any radius including fixing clips complete all as specified and as directed.

75mm dia bore PVC (SWR) Junction (single 'T') equal or unequal with access doors, any radius including fixing clips complete all as specified and as directed.

Taking up or down UPVC tubing 20mm bore pipe and connections, for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.

Taking up or down UPVC tubing 25/32mm bore pipe and connections, for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.

UPVC tubing, 20mm bore, including complete cleaning of pipe and fitting such as bends, tees, elbows, short pieces, connectors, back nuts and connections in new or old position (walls, ceiling, floors) complete all as specified and as directed by Engineer-In-Charge.

UPVC tubing, 25mm bore, including complete cleaning of pipe and fitting such as bends, tees, elbows, short pieces, connectors, back nuts and connections in new or old position (walls, ceiling, floors) complete all as specified and as directed by Engineer-In-Charge.

UPVC tubing, 32mm bore, including complete cleaning of pipe and fitting such as bends, tees, elbows, short pieces, connectors, back nuts and connections in new or old position (walls, ceiling, floors) complete all as specified and as directed by Engineer-In-Charge.

Sink with drain board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1040mm x 510mm bowl size 460mm x 410mm x 200mm glossy finish, including waste pipe, brass coupling fixed in repair / replacement complete all as specified.

Fixing only Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm glossy finish, including waste pipe, brass coupling fixed in repair / replacement complete all as specified. Note : Stainless steel sink will be issue under sch 'B' free for fixing only.

Taking down shutters of any descriptions, area exceeding 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

Taking down chowkats or frames n. exc 1.5 sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

Factory made solid panel PVC door shutter, 30mm thick (style consisting of frame made out of MS frame covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip 20 mm wide stuck inside with solvent cement for style and plain colour PVC sheets for top lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per manufacturer's instruction and as specified in SSR Part-II-2020.

Factory made 30 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, and fitted to chowkats, kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Factory made 35mm thick, 2nd class hard wood, plain framed, panelled shutters, (two panel) with lock rail and, panels shall be of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

100mm Butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel, complete all as specified and directed.

150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

300mm long (Length of Bolt in mm) Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wooden primer complete all specified and directed.

Fixing only 100mm Butt hinges (Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed in repair / replacement complete all as specified.

Fixing only 150mm long aluminium anodised, barrel tower bolts of extruded section fixed in repair / replacement complete all as specified and directed.

Fixing only 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type, anodised and fixed in repair / replacement complete all as specified.

Fixing only 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair / replacement complete all as specified. Note for Item No. 93.00 to 96.00 : - The items / builders Hardware unscrewed from the joinery will be reused as directed.

300mm ordinary rat tail rod pattern springs including roller and roller plate fixed in repair / replacement complete all as specified.

Stainless steel plate rack of size 90x75x25 cm depth made out of 0.80mm thick SS sheet fixed in repair / replacement complete all as specified & directed by Engineer-in-Charge.

Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws fixed in repair / replacement complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/aluminum frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

4mm thick sheet glass, ordinary quality in square n exc 0.5 sq. m in each pane fixed to aluminium window complete all as specified.

4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed.

5.5mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed.

Aluminium Alloy wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs complete all as specified.

Powder coated aluminium anodised frame and shutter for doors, windows and partitions with one or more rebates including necessary joining cleats, glazing clips, rubber neoprene packing, handle, stoppage, locking arrangements etc complete with powder coating of approved colour minimum thickness 50 micron complete all as specified and directed.

Plain fillets of 2nd class hardwood square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional size exc 13 sqcm but n exc 25 sqcm complete all as specified and directed.

18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter, shelves etc including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & French polishing to edging including taking down old partcle board complete all as specified.

Hydraulically aluminium extruded section body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc, fixed in repairs complete all as specified and directed.

Aluminium powder coated Peg set of 6 with PVC cap fixed in repair / replacement complete all as specified and directed.

Rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces on Roof slab in CM 1:3 finished even and smooth without using extra cement including mixing water proofing compound, complete all as specified and as directed. (NOTE:- Water proofing compound will be measured and paid separately)

PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregate) in padding concrete to over slab 40 mm thick (average) bedding layer mixed with WPC, finishing even and smooth without using extra cement complete all as specified and as directed. Note : WPC & APP measured and paid separately.

Cutting channels, grooves or rebates with or without reinforcement n. exc 15cm girt and trimming surfaces complete all as specified and directed.

Demolition of old textile covering from roof top (old WPT) complete all as specified and directed.

Water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of Bituminous aluminium paint on top of APP membrane.

Anti-skid Endura Cool roof SRI (Solar reflective index) ceramic tiles (of approved color) 300x300x10mm thick square / rectangular laid over plastered / APP membrane surfaces of roof in 15mm thick screed bed in CM 1:4, joints grouted with tile grout complete all as specified and directed.

Demolition of Plain cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and as directed.

PCC 1:2:4 type B-1 using (20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and similar work including use & waste of necessary form work complete all as specified and as directed.

Crack filler compound (ready to use) on cracked external wall/roof surfaces including cutting 'V' groove over crack lines and painting with existing material and color (wall surface only) including necessary scaffloding complete all as specified and directed.

Preparation of old plastered decorated surfaces of walls, soffits & facias and applying one coat of weather proof Acrylic based exterior emulsion paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified.

Rolled section as in framing for claddings, purlins and rafter cutting laps to shape as required drilling holes, notching for wire including all necessary drilling, rivetting or bolting or welding complete all as specified and as directed.

Preparation of new steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specified and directed.

Preparing new plaster surfaces of any description / surb stones over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements, including providing and fixing 12 mm thick seamless calcium silicate ceiling board made out of 1800 x 1200mm size board, comprising of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at minimum spacing of 200mm centre to centre, including fnishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tap to provide seamless finish and multi layer design complete all as specified and directed.

12mm thick toughened glass for door, partition etc. of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top, bottom and sides, lock and handles, spider joint etc. and concealed floor door spring as per requirement all as specified, required at site by manufacturer instructions and complete all as specified and directed. Make : Floor machine / OZONE / HARDWYN / DORMA / SAFEX

BABUBHAI BHIMABHAI PANDAVADRA

SHREEJI ENTERPRISE