AMC FOR ELECTRICAL O and M ACTIVITIES (PART-B)

Amount

Hiring of Highly- Skilled Manpower : Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- i) Hiring of Service of Highly- Skilled Manpower for Providing assistance in Electrical O<(>&<)>M in General shift/round the clock in 3 shifts. The party need not quote for this item.

Hiring of Skilled Manpower: Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- ii) Hiring of Service of Skilled Manpower for Providing assistance in Electrical O<(>&<)>M in General shift/round the clock in 3 shifts. The party need not quote for this item.

Hiring of Semi-Skilled Manpower : Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- iii) Hiring of Service of Semi-Skilled Manpower for Providing assistance in Electrical O<(>&<)>M in General shift/round the clock in 3 shifts. The party need not quote for this item.

Hiring of un skilled manpower : Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- iv) Hiring of Service of un skilled manpower to meet emergent situation & for carrying out any unforeseen/ contingent nature job not covered under above items. This will be purely on call basis as and when required. The party need not quote for this item.

Payment against EPF : Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- v) Payment gainst deposition of Employee Provident Fund (Employer contribution). The party need not quote for this item.

Payment against Bonus : Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- vi) Payment against Bonus. The party need not quote for this item.

Payment against ESIC: Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- vii) Payment against ESIC. (Employer contribution) The party need not quote for this item.

Payment against NSA : Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- viii) Payment against Non Statutory allowance . The party need not quote for this item.

Payment against Revision Minimum wages : Payment Towards Basic Minimum Wages along with other statutory allowances,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- ix) Provision for Revision of Minimum wages. The party need not quote for this item.

Payment against Paid Annual Leave: Payment Towards Basic Minimum Wages alongwith other statutory allowances ,Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- x) Payment against Paid Annual Leave The party need not quote for this item.

Payment against Holiday : Payment Towards Basic Minimum Wages along with other statutory allowances<(>,<)> Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- xi) Payment against 03 National holidays & 08 Festival Holidays The party need not quote for this item.

Payment against PPE : Payment Towards Basic Minimum Wages along with other statutory allowances<(>,<)> Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- xii) 2 nos. of Uniform, 1 Pair of Safety Shoe, 2 Pair of Socks , 1 no of Helmet and PPE's as per the provision under Factories Act 1948 and as per safety norms of BCPL per year upon submission of proof of purchase and distribution @ Rs. 3000/- per Worker per year. The party need not quote for this item.

Payment against Health Check up : Payment Towards Basic Minimum Wages along with other statutory allowances<(>,<)> Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- xiii) Health Checkup provisions twice in a year under Factories Act 1948 and as per safety norms of BCPL per year upon submission of proof of documents and reports. The party need not quote for this item.

Payment against Shift Allowances : Payment Towards Basic Minimum Wages along with other statutory allowances<(>,<)> Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- xiv) Payment against Shift Allowance for manpower performing duties in A, B & C-shift. The party need not quote for this item.

Payment against PMSBY & PMJJBY : Payment Towards Basic Minimum Wages along with other statutory allowances<(>,<)> Non statutory allowances ,Uniforms and health check up as per Factories act 1948 and BCPL Norms:- xv) Payment against Pradhan Mantri Suraksha Bima Yojana (PMSBY) and Pradhan Mntr Jeevan Jyoti Bima Yojana(PMJJBY) per manpower The party need not quote for this item.

Payment against Facility Management : Facility management: Contractors overhead & profit inclusive of deployment of site incharge ,tools and tackles ,retention of manpower Refer SCC clause 2.4

Inst of 3 Core 33/6.6 KV Jntg Kit : Installation of Indoor/Outdoor type heat shrinkable end termination kit/straight through joint kits for 3 Core, 33KV/6.6KV, Al/Cu. Conductor XLPE Armoured Cable(UE Type), of sizes upto 300 sq.mm. excluding supply of kit but including all tools and tackles etc. as required for making of termination as per standard work practice and directions of the EIC.

Inst of 1 Core 33 KV Jntg Kit : Installation of Indoor/Outdoor type heat shrinkable end termination kit for 1 Core, 33KV, Cu. Conductor XLPE Armoured Cable(UE Type), of sizes upto 500 sq.mm. excluding supply of kit but including all tools and tackles etc. as required for making of termination as per standard work practice and directions of the EIC.

Inst of Multicore1.1 KV Jntg Kit : Installation of straight through Joint Kit for 1.1KV Grade , Al/Cu . Conductor PVC Insulated and Sheathed Armoured Cable of sizes upto 300 sq.mm. Single/3/3/5/Multi Core Cables, excluding supply of kit but including all tools and tackles etc. required for making of termination as per standard work practice and directions of the EIC.

Supply & App of 1 coat Paint : Painting of lighting poles and other electrical equipments with Berger / Shalimar / Asian enamel paint, in the shades as directed by the EIC including supply of all labour,material and consumables as per specifications of the tender and directions of EIC. i) Supply and application of one coat of light build zinc phosphate primer after making preparation of surface to be painted with the help of wire brush, emery or sand paper.

Supply & App of 2 coat Syn Paint : Painting of lighting poles and other electrical equipments with Berger / Shalimar / Asian enamel paint, in the shades as directed by the EIC including supply of all labour,material and consumables as per specifications of the tender and directions of EIC. ii) Supply and application of two coat of first quality synthetic enamel paint / aluminum paint after making preparation of surface to be painted with the help of wire brush, emery or sand paper.

Supply & App of 1 coat Syn Paint : Painting of lighting poles and other electrical equipments with Berger / Shalimar / Asian enamel paint, in the shades as directed by the EIC including supply of all labour,material and consumables as per specifications of the tender and directions of EIC. iii) Supply and application of one coat of first quality synthetic paint / al. paint after making preparation of surface to be painted with the help of wire brush, emery or sand paper.

Supply & App of 2 coat Epoxy Paint : Painting of lighting poles and other electrical equipments with Berger / Shalimar / Asian enamel paint, in the shades as directed by the EIC including supply of all labour,material and consumables as per specifications of the tender and directions of EIC. iv) Supply and application of two coat of epoxy paint of approved make as per the direction of engineer in charge by spray painting machine including the cost of paint and labour to complete the job.

Supply & Fix of 25 mm PVC Conduit : Supply & fixing of 25 mm PVC heavy gauge conduit (As per tender specifications and approved makes)on walls including supply of conduit, clamps, bends, unions,all other required hardwares and accessiories, PVC junction boxes and saddles etc, as per the directions of the EIC.

Supp & Lay of FRLS PVC 3/20, 3/22, 3/18 :Supply and laying of FRLS PVC Insulated Copper Wires in safe area/buildings/substations in existing concealed or surface conduit.This includes removal of burnt/ damaged wire, supply and laying of new wires of same size and making connections in existing DB/Switch etc. of following sizes from lighting/power panel/distribution junction box onwards,excluding the supply of junction boxes and cable glands but including cable termination and connections,including all tools.tackles and accesories etc. as per approved drawings,specifications of this tender and directions of engineer-in -charge. i) 3/20,3/22,3/18 of FINOLEX/HAVELL's make

Supp & Lay of FRLS PVC 7/20, 7/22, Exs : Supply and laying of FRLS PVC Insulated Copper Wires in safe area/buildings/substations in existing concealed or surface conduit.This includes removal of burnt/ damaged wire, supply and laying of new wires of same size and making connections in existing DB/Switch etc. of following sizes from lighting/power panel/distribution junction box onwards,excluding the supply of junction boxes and cable glands but including cable termination and connections,including all tools.tackles and accesories etc. as per approved drawings,specifications of this tender and directions of engineer-in -charge. ii) 7/20,7/22 of FINOLEX/HAVELL's make

Supp & Fix of Casing Capping : Supply and fixing of casing caping flat conduit on walls/ wooden panels etc. The flat conduit shall be of 1"/1.5" width and shall be fixed using PVC rawal plugs and wooden screws of appropriates size. Material shall be duly approved by EIC and job shall be carried out as per specifications of the tender and directions of EIC.

Supp & Lay of FRLS PVC 3/20, 3/22, 3/18 : Supply and laying of FRLS PVC insulated copper wire of Havells/Finolex make of following sizes in new/unused Flat PVC conduit/M.S conduit & casing caping, connections on both ends including its necessary terminations as per specifications of the tender and directions of the EIC. i) 3/20, 3/22,3/18 of FINOLEX/HAVELL's make

Supp & Lay of FRLS PVC 7/20, 7/22, New : Supply and laying of FRLS PVC insulated copper wire of Havells/Finolex make of following sizes in new/unused Flat PVC conduit/M.S conduit & casing caping, connections on both ends including its necessary terminations as per specifications of the tender and directions of the EIC. ii) 7/20, 7/22 of FINOLEX/HAVELL's make

Discon dis & Lift of Submrsble Pump: Disconnection, Dismantling and Lifting of existing submersible pumpset for borewell including all tools and tackles etc as per specifications of the tender and diretions of the EIC .

Lower, Inst & Connct of Submr Pump : Lowering, installation and connection of existing/new submersible pumpset for borewell including all tools and tackles etc as per specifications of the tender and diretions of the EIC .(Supply of Pumpset is excluded)

Lay of CBL upto OD 20 MM : Laying of cables of different voltage grades(1.1KV/6.6KV/33KV) and types of the following external overall diameters in ready tray/trenches/supported over concrete or MS structure/pull through GI/Hume pipes including supply, clamping and fabrication of clamps using GI Saddles/Saddle Bars, dressing/fixing of clamps/cleats/welding of saddles,supply and fixing of aluminium/lead strips number tags and tagging of cables,supply and applying of fireproofing paint to meet OISD requirement( for 1 m length near terminations),including transportation from store/yard to site at the place of installation,unpacking, un-rolling of cables,including all labours and materials,as per approved drawings,specification of this tender and direction of Engineer-In-Charge.In case of of water logging in cable trench, Contractor shall arrange for dewatering of the trench also. i) Cables with OD upto 20mm

Lay of CBL ave 20 & upto OD 30 MM : Laying of cables of different voltage grades(1.1KV/6.6KV/33KV) and types of the following external overall diameters in ready tray/trenches/supported over concrete or MS structure/pull through GI/Hume pipes including supply, clamping and fabrication of clamps using GI Saddles/Saddle Bars, dressing/fixing of clamps/cleats/welding of saddles,supply and fixing of aluminium/lead strips number tags and tagging of cables,supply and applying of fireproofing paint to meet OISD requirement( for 1 m length near terminations),including transportation from store/yard to site at the place of installation,unpacking, un-rolling of cables,including all labours and materials,as per approved drawings,specification of this tender and direction of Engineer-In-Charge.In case of of water logging in cable trench, Contractor shall arrange for dewatering of the trench also. ii) Cables with OD above 20 mm but upto 30mm

Lay of CBL ave 30 & upto OD 40 MM : Laying of cables of different voltage grades(1.1KV/6.6KV/33KV) and types of the following external overall diameters in ready tray/trenches/supported over concrete or MS structure/pull through GI/Hume pipes including supply, clamping and fabrication of clamps using GI Saddles/Saddle Bars, dressing/fixing of clamps/cleats/welding of saddles,supply and fixing of aluminium/lead strips number tags and tagging of cables,supply and applying of fireproofing paint to meet OISD requirement( for 1 m length near terminations),including transportation from store/yard to site at the place of installation,unpacking, un-rolling of cables,including all labours and materials,as per approved drawings,specification of this tender and direction of Engineer-In-Charge.In case of of water logging in cable trench, Contractor shall arrange for dewatering of the trench also. iii) Cables with OD above 30 mm but upto 40mm

Lay of CBL ave 40 & upto OD 50 MM : Laying of cables of different voltage grades(1.1KV/6.6KV/33KV) and types of the following external overall diameters in ready tray/trenches/supported over concrete or MS structure/pull through GI/Hume pipes including supply, clamping and fabrication of clamps using GI Saddles/Saddle Bars, dressing/fixing of clamps/cleats/welding of saddles,supply and fixing of aluminium/lead strips number tags and tagging of cables,supply and applying of fireproofing paint to meet OISD requirement( for 1 m length near terminations),including transportation from store/yard to site at the place of installation,unpacking, un-rolling of cables,including all labours and materials,as per approved drawings,specification of this tender and direction of Engineer-In-Charge.In case of of water logging in cable trench, Contractor shall arrange for dewatering of the trench also. iv) Cables with OD above 40 mm but upto 50mm

Lay of CBL ave 50 & upto OD 60 MM : Laying of cables of different voltage grades(1.1KV/6.6KV/33KV) and types of the following external overall diameters in ready tray/trenches/supported over concrete or MS structure/pull through GI/Hume pipes including supply, clamping and fabrication of clamps using GI Saddles/Saddle Bars, dressing/fixing of clamps/cleats/welding of saddles,supply and fixing of aluminium/lead strips number tags and tagging of cables,supply and applying of fireproofing paint to meet OISD requirement( for 1 m length near terminations),including transportation from store/yard to site at the place of installation,unpacking, un-rolling of cables,including all labours and materials,as per approved drawings,specification of this tender and direction of Engineer-In-Charge.In case of of water logging in cable trench, Contractor shall arrange for dewatering of the trench also. v) Cables with OD above 50 mm but upto 60mm.

Lay of CBL ave OD 60 MM : Laying of cables of different voltage grades(1.1KV/6.6KV/33KV) and types of the following external overall diameters in ready tray/trenches/supported over concrete or MS structure/pull through GI/Hume pipes including supply, clamping and fabrication of clamps using GI Saddles/Saddle Bars, dressing/fixing of clamps/cleats/welding of saddles,supply and fixing of aluminium/lead strips number tags and tagging of cables,supply and applying of fireproofing paint to meet OISD requirement( for 1 m length near terminations),including transportation from store/yard to site at the place of installation,unpacking, un-rolling of cables,including all labours and materials,as per approved drawings,specification of this tender and direction of Engineer-In-Charge.In case of of water logging in cable trench, Contractor shall arrange for dewatering of the trench also. vi) Cables with OD above 60 mm.

Supp , Fabri Inst of 50X50X6 MM Frame : Supply , Fabrication and installation of MS Base Frames,MS Chequered Plates of dimension 50x50x6 mm and 6 mm thick, MS Support for Switchgear and brackets for misc. Electrical Equipment, Cable and Cable Tray Supports out of Rolled MS Section,Flats, Pipes, Plates etc, including shot blasting, welding, bolting,rivetting, supply of necessary anchor bolts and grouting etc, supply of paint and applying one coat of anti-rust primer and two finished coats of approved sythetic enamel paint, including breaking walls/floors etc, for structures as required including supply of all GI hardware material, all labour and materials etc. as per the standard specifications of the tender and directions of Engineer- In-Charge.

Supp, Inst of Canopies 16 SWG : Supply, installation and erection of canopies of miscellaneous outdoor equipments like motors, Welding receptacles, Local control stations, switchboards etc for rain/weather protection of 16 SWG ( 1.6mm) sheet steel including the cost of steel, hardware, painting and labour etc. as per specifications of the tender and directions of EIC.

Supp, Fabri & Inst of 22 SWG GI Sheet : Supply, fabrication and installation of 22 SWG GI sheet covers for cable trays, including necessary hardwares, including all labour and materials as per specifications of the tender and directions of EIC.

Supp, Inst , Connctn 20X3 GI ERTH STRP : Supply, installation and connection of following GI earth strip along the ready cable trenches or cable trays or fixing on walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and all necessary hardware for connecting etc., including all labour and tools, as per approved drawings, specifications of this tender and directions of Engineers- in- Charge. i) 20 x 3 mm

Supp, Inst , Connctn 50X6 GI ERTH STRP : Supply, installation and connection of following GI earth strip along the ready cable trenches or cable trays or fixing on walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and all necessary hardware for connecting etc., including all labour and tools, as per approved drawings, specifications of this tender and directions of Engineers- in- Charge. ii) 50 x 6 mm

Supp, Inst , Connctn 75X10 GI ERTH STRP : Supply, installation and connection of following GI earth strip along the ready cable trenches or cable trays or fixing on walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and all necessary hardware for connecting etc., including all labour and tools, as per approved drawings, specifications of this tender and directions of Engineers- in- Charge. iii) 75 x 10 mm

Supp & Layng GI Pipe 150 MM NB : Supply and laying of GI pipes "B" class of following sizes in required length fixed on steel,concrete or similar structure,above ground or laid in trenches, ready to be buried in concrete, including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc. small civil works, including all manpower,materials and tools as per approved drawings , specifications of the tender and directions of EIC. i) 150mm NB

Supp & Layng GI Pipe 100 MM NB : Supply and laying of GI pipes "B" class of following sizes in required length fixed on steel,concrete or similar structure,above ground or laid in trenches, ready to be buried in concrete, including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc. small civil works, including all manpower,materials and tools as per approved drawings , specifications of the tender and directions of EIC. ii) 100mm NB

Supp & Layng GI Pipe 50 MM NB: Supply and laying of GI pipes "B" class of following sizes in required length fixed on steel,concrete or similar structure,above ground or laid in trenches, ready to be buried in concrete, including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc. small civil works, including all manpower,materials and tools as per approved drawings , specifications of the tender and directions of EIC. iii) 50 mm NB

Excvtn & Bckflng of Trench : Excavation and backfilling of trenches for cables and earth strip etc. in all types of soil except rock, for a maximum depth of 1.5M, shoring, shuttering and dewatering(if necessary) including consolidation and disposal of surplus earth up to a distance of 100 Metres, including all labour and tools, as per approved drawings, specifications of this tendor and direction of Engineer-in-charge.(Excavated trench dimentions shall be measured).

Supply & Spread of Fine Sand : Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and tools, specifications of this tender and direction of Engineer-in-charge.

Supply & Spread of Brick 75 MM : Supply and spreading of approved second class bricks of 75 mm thickness in cable trenches for cable protection including all labour and tools, as per approved drawings, specifications of this tender and directions of Engineers- in- Charge.

Laying PCC of M-15 Grade :Providing and laying plain cement concrete for all depths below and up to a plinth level in foundations including tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed, including supply of M-15 grade with 20 mm concrete and down size graded crushed stone aggregates, including all labour and tools, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.

Fault Finding Pwr & Cntrl CBL 1.1 KV : Fault Finding of buried cable/cable laid in concrete trench using cable fault locator including excavation at location of fault , manpower, special tools, accessories and logistics at BCPL LEPETKATA/DULIAJAN/LAKWA/RAILWAY SIDING/RAW WATER INTAKE FACILITY as per specifications of the tender and directions of EIC. The work is to be carried out with close supervision and without damage to cable due to faulty equipment/machine/wrong operation and in a safe manner with proper safety gear/PPE's etc. i) For Power and Control Cables upto 1.1KV Grade

Fault Finding Pwr CBL Upto 33 KV: Fault Finding of buried cable/cable laid in concrete trench using cable fault locator including excavation at location of fault , manpower, special tools, accessories and logistics at BCPL LEPETKATA/DULIAJAN/LAKWA/RAILWAY SIDING/RAW WATER INTAKE FACILITY as per specifications of the tender and directions of EIC. The work is to be carried out with close supervision and without damage to cable due to faulty equipment/machine/wrong operation and in a safe manner with proper safety gear/PPE's etc. ii) For Power Cables of 6.6KV and upto 33 KV Grade

Supp, Inst , Testng of GI Pipe Erthng St: GI PIPE EARTHING STATION:Supply, assembling, installing, testing and commisioning with all the items for constructing GI pipe earthing station.The earthing station comprises of one number B class GI eathing pipe size 40 mm X 5 mm thick(minimum 4.5 mtr. deep) GI funnel with stainless steel hinged door on steel frame(300 X300mm) to cover up the watering pit, minimum 50 Kg salt , minimum 100 kgs of fine charcoal powder , earthing conductor size 25 mm X 3 mm GI flat from pipe to the ground level , required hardware and miscellaneous items.The work involves digging pit on the soil , burying the earth electrode in the mixture of common salt and charcoal, connecting earthing conductor to earthing electrode, backfilling the soil and constructing the watering pit, preapring the earth-pit cahmber , at the site as specified and details as per the dierection of EIC

Supp, Fitting & Fixing of CI Route marke: Supply with fittings and fixture of Cast Iron(C I) route marking for electrical cable trench(Post mounted Cast Iron Plate) as specified and directed by EIC.

Salt treatment of Earth -pit : Salt Treatment of Earth pit with Charcoal and Salt and water solution to achive a desirable resistance value (individual & with grid) including all labour and materials as per specifications of the tender and directions of EIC.Charcoal,Salt and other materials are in the scope of the contractor ,only earth tester shall be provided by BCPL.

Painting of letter upto 25mm : Painting of Alphabetical letters and numbers on equipments, poles, panels on Yellow Base Colour and Black Colour of the Alphabets/Numbers including supply of the paint of required shade including manpower, materials like Paint Brush, Stencil, tools and tackles etc. required for execution of the work, as per the diirection of the EIC. i) Paint of letter upto 25mm

Painting of letter upto 50mm : Painting of Alphabetical letters and numbers on equipments, poles, panels on Yellow Base Colour and Black Colour of the Alphabets/Numbers including supply of the paint of required shade including manpower, materials like Paint Brush, Stencil, tools and tackles etc. required for execution of the work, as per the diirection of the EIC. ii) Paint of letter upto 50mm

Painting of letter upto 100mm : Painting of Alphabetical letters and numbers on equipments, poles, panels on Yellow Base Colour and Black Colour of the Alphabets/Numbers including supply of the paint of required shade including manpower, materials like Paint Brush, Stencil, tools and tackles etc. required for execution of the work, as per the diirection of the EIC. iii) Paint of letter upto 100mm

Conntcn by Erth Strip of 3/8" Dia : Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire rope including the supply of G.I. wire/ G.I. wire rope, lugs, conductors, connecting to the G.I. strip of earth plate and necessary hardware for connection, including all labour and tools, as per approved drawings, specifications of this tender and directions of Engineers- in- Charge. i) 3/8" dia (10 mm) flexible rope.

Conntcn by Erth Strip of 5/8" Dia : Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire rope including the supply of G.I. wire/ G.I. wire rope, lugs, conductors, connecting to the G.I. strip of earth plate and necessary hardware for connection, including all labour and tools, as per approved drawings, specifications of this tender and directions of Engineers- in- Charge. ii) 5/8" dia (16 mm) flexible rope.

Conntcn by Erth Strip of 8 SWG GI Wire : Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire rope including the supply of G.I. wire/ G.I. wire rope, lugs, conductors, connecting to the G.I. strip of earth plate and necessary hardware for connection, including all labour and tools, as per approved drawings, specifications of this tender and directions of Engineers- in- Charge. iii) 8 SWG GI wire

Manual Boring : Manual Boring of 50 MM diameter for road crossing of 6-10 meter length

Ident & Rect of 33 KV Fault Township : Maintenance of 33 KV overhead line of BCPL LEPETKATA, and its associated facilities, including tools, tackles, ladders, logistics etc. and PPE's for completion of the work excluding the material for overhead line which shall be supplied by BCPL:- i) Identification and rectification of fault in 33 KV Line of 7 Kms from BCPL Plant to CISF/BCPL Township.

Ident & Rect of 33 KV Fault Rly Siding :Maintenance of 33 KV overhead line of BCPL LEPETKATA, and its associated facilities, including tools, tackles, ladders, logistics etc. and PPE's for completion of the work excluding the material for overhead line which shall be supplied by BCPL:- ii) Identification and rectification of fault in 33KV O/H Line of 3.0 kms from Ghoronia Tea Estate to Railway Siding(Naptha Loading Facility).

Ident & Rect of 33 KV Fault RWIF : Maintenance of 33 KV overhead line of BCPL LEPETKATA, and its associated facilities, including tools, tackles, ladders, logistics etc. and PPE's for completion of the work excluding the material for overhead line which shall be supplied by BCPL:- iii) Identification and rectification of fault in 33 KV Line of 7 Kms from BCPL Plant to RAW Water Intake Facility.

Jungle Clearance : Maintenance of 33 KV overhead line of BCPL LEPETKATA, and its associated facilities, including tools, tackles, ladders, logistics etc. and PPE's for completion of the work excluding the material for overhead line which shall be supplied by BCPL:- iv) Jungle clearance including uprooting of bushes,tree branches trimming and removal it from the 33 KV overhead network of approx 7 km long

Pattroling of 33 KV O/H Line : Maintenance of 33 KV overhead line of BCPL LEPETKATA, and its associated facilities, including tools, tackles, ladders, logistics etc. and PPE's for completion of the work excluding the material for overhead line which shall be supplied by BCPL:- v) Patrolling of 33 kV overhead line (approx 7 km) for identification of any problem on monthly basis /as per requirement

Shifting of Diesel :Shifting of One Barrel Diesel (1 Barrel = 200 Liter) at a time from Fuel station to the DEG set located at BCPL Township or BCPL Raw Water Intake Facility & at Railway Siding. Diesel will be provided by BCPL

M/s WING ENGINEERING

Miraj Instrumentation Services I Pvt. Ltd.