CONSTR OF 01 X STORE ROOM OF SIZE 4.88 X 3.66M FOR HOLDING OF SECURITY RELATED EQPTS IN BLDG NO-389 AND FENCING WITH ONE GATE AROUND THE BLDG OF 224 ABOD AT BANAR

Amount

BUILDING PORTION Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete.

M&L for square rubble walling , Jodhpur type regular coursed , well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified

Extra over stone walling forhammer dressing to face stones and dressing of face beds and joints, as specified for squared rubble masonry, regular coursed complete all as specified

20mm thick rendering over stone masonary in CM 1:6 and finished even and smooth without using extra cement complete all as specified

M & L for Machine cut kota stone slab flooring 20-25mm thick over and including 20 mm thick bedding layer in CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone agregate and 75 mm thick sub base PCC 1:4:8 type D-2 over rammed earth complete all as specified.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15 mm thick in CM 1:3 cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of priming complete all as specified

S&F Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Preparing new steel or iron surfaces of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Supply and Fixing mild steel cold rolled butt hinges medium weight 150 mm long complete all as specified.

Supply and fixing aluminium handles, cast type, anodised 150 mm long complete all as specified.

S&F aluminium anodised, barrel tower bolts of extruded section, 200mm long complete all as specified.

S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified .

S&F floor door stoper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor (140mm length of cover plate) complete all as specified.

M&L for mild steel work in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali primer Complete all as specified and directed.

FENCING AND GATE Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified

Excavation in trenches, n-exc 1.50m wide and n.exc, 1.50m in depth for foundation etc or for shafts wells, manholes, pier holes etc in soft loose soil complete all as specified

M&L for PCC 1:4:8 (type D-2) using 40 mm stone aggregate as in fdn, filling and mass concreate all as specified

M&L, PCC type C-2 (1:3:6) using 40mm graded aggregate as in foundation, filling and mass concrete (For fencing post) all as specified .

M&L for Pre –cast cement concrete block masonery with solid block of PCC (1:4:8) type D-2 (Using 40 mm graded stone aggregate), exceeding 10 cm in width and setting in CM (1:6) complete all as specified

Returning, filling in, soil, including, spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick all as specified.

Removing excavated material (soil) n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate as in cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified

S & F Rolled Mild Steel sections confirming to Fe 290 Gde E-165 as in fencing post or other similar work all as directed by Engineer-in-Charge

S&F MS round bars 10mm dia & above cut to length bent to shape required including cranking bending spirally for hopping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS.(Fe 290 (Gde-E-165))

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long of 11 to 15 mm dia of shank.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified.

M&L for preparation of new steel surfaces and applying two coats of black bituminous paint to steel surface of any discription over 10 cm width or girth including complete all as specified

Supply only MS Galvanized chain link fencing of size 100mmx100mm square mesh of 10 gauge type all as directed by the Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size andy type of standards, rails, straining bolts etc. complete including provision of binding wire all as directed by the Engr-in-Charge.

M&L galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured).

M&Lfor RCC M-25 (design mix) using 20mm graded stone aggregate as in footing complete all as specified

Form work to sides of concrete foundation footing for rough finished surface complete all as specified

M&L RCC M-25 (design mix) above/below GL as in columns and similar works complete all as specified

Form work to sides of columns above/below GL for fair finished surface complete all as specified

M&L , mild steel TMT bars 10mm dia and over cut to length/bent to shape required including cranking, bending, prisally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or clips complete all as specified

All as per item No 39.00 above but 8mm dia as in stirrups, spacers, binders

S&F framed work such as in doors or gates of angle or other section with gusset plates rails, braces etc. complete drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks an d hinges or steel hanging doors fittings and hanging also fastening and fixing complete (Fe 290 Gde E-165) complete all as specified

S&F mild steel angle for hold fast conforming to Fe 410-0 or Fe 310-0 complete all as specified.

M & L for 10 mm thick rendering over concrete surface in CM (1:3) complete all as specified.

M & L for Preparation of new surfaces and applying two coats of cement base paint over primer complete all as specified

INTERNAL ELECTRIFICATIONS M&L for concealed point wiring complete with multistranded copper conductor 1.5 sqmm size PVC FRLS insulated cable 1100 Volt grade, conforming IS 694 & color code in conduit system of wiring and making good disturbed surface complete including single core solid multistranded copper conductor 1.5 sqmm size solid PVC FRLS insulated cable as earth wire and connected to earth dolly drawn in same conduit complete all as specified . a) one light/fan point controlled by one way switch.

All as per item No 45.00 abvove but fan point controlled by one one way switch.

All as per item No 45.00 abvove but 5 Amp Socket outlet on same board.

All as per item No 45.00 abvove but 5 Amp Socket outlet on independent board.

Supply and fixing switch Piano flush type 5 Amp single pole complete all as specified.

Supply and fixing multipurpose socket outlet 2 in 1, 3 pin, 5 Amp flush type contrlled by one switch all as specified.

Supply and fixing ceiling rose on PVC board size 65X50 mm three terminal complete.

Supply and fixing fan regulator electronic type for ceiling fan 1200 mm sweep.

Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fixing LED lamp 12 Watt complete all as specified.

M/S PIYUSH CONSTRUCTION COMPANY

AJEET ENTERPRISES

POOJA CONSTRUCTION

INDO CONSTRUCTION

Surendra Singh

DIWAKAR CONSTRUCTION CO.