PROVN OF BLACK TOPING ON INTERNAL ROAD AT P-4 BLDG COMPLEX UNDER GE DEHRADEUN

Amount

Excavation over areas n.exc 1.50 m deep for foundation etc and getting out in hard/dense soil complete all as specified and dircted.

M&L for soling (or sub base) spread thickness 150 mm thick with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed..

M&L for providing 150mm thick WBM in two layers each layers 75mm thick with coarse aggregate granite trap or basalt of grading 2 spread rolled and consolidated to gradient and chamber with 8 to 10 Ton power rolled complete all as specified and directed. Note:-Combined thickness ie 150 mm thick shall be measured in single unit.

M&L for continuous brick edging; with width equal to the width of the brick; laid dry on end vertically With burnt clay bricks old size of sub class B complete all as specified and directed.

M&L for preparing of un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc. and sweeping with mechanical broomers and finally fanning the cleaned surface with air compressors to remove all loose dirt and applying evenly priming tack coat with bituminous primer @ 10Kg/10 sqm using viscosity grade Bitumen VG-10 complete all as specified and directed.

M&L for premix bituminous macadam consolidated thickness (75mm or less) thick with 4% binder content by weight of total mix using viscosity grade Bitumen VG-10 any penetration laid/rolled to required gradient and camber using power road roller complete all as specified and directed. Note:- Preparing surface and priming coat on bituminous macadem shall be measured and paid separately.

M&L for providing bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M/S BRIJPAL SINGH MALIK

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS