Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAdmitted-Finance MASTHIKUND HOUSE CHENGALA POST KASARAGOD KERALA 671541 | KASARAGOD | KERALA | 671541 | ₹1.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.4 Cr+₹6.2 L (4.50%)Admitted-Finance | ₹1.4 Cr+₹6.2 L (4.50%) | L2 | Admitted-Finance |
| 3 | L3₹1.6 Cr+₹23.1 L (16.8%)Admitted-Finance | ₹1.6 Cr+₹23.1 L (16.8%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Peter And Company L3 | mohammed shafi L2 | ABDUL NAZAR M A L1 |
|---|---|---|---|---|---|---|
| 1.00PLANT BUILDING | ||||||
| 1.01 | 15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet | 8,490 | sqm | 80 ₹6,79,200 | 60 ₹5,09,400 | 50 ₹4,24,500 Lowest |
| 1.02 | Conveyance Charges by Lorry Upto 10 KM for roofing sheets,Ridge materials , Glass materials etc complete including loading unloading charges. | 5 | TRIP | 7,000 ₹35,000 | 3,800 ₹19,000 | 3,500 ₹17,500 Lowest |
| 1.03 | od56509/2021_2022 : Providing and laying Corrugated Galvalume colour coated sheet made out of 0.50mm TCT cold rolled steel of 550 Yield strength conforming to ASTM A368 or As1397.Roofing shall be crest fixed to purlins with hot dip galvanised self drilling /self tapping screws of size (5.5x 55 mm) with integral EPDM washers. Minimum sheet over lap at end laps shall be 150mm.Penetration and end laps in sheet shall be sealed by proper sealent material. with EPDM seal, rate shall be inclusive of cost and conveyance of all materials all labour for lead, lift,scaffolding charges ,all labour charges making roof water tight with required sealand material etc complete at all levels | 8,490 | sqm | 780 ₹66,22,200 Lowest | 920 ₹78,10,800 | 895 ₹75,98,550 |
| 1.04 | od56512/2021_2022 : Providing and fixing ridge/ valley capping/flashing in required width (minimum 500 mm) with plain galvalume colour coated sheet made out of 0.5mm TCT, minimum 550 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges, all taxes etc. complete at all levels as directed by Engineer-in-Charge | 1,984 | metre | 1,100 ₹21,82,400 | 620 ₹12,30,080 | 590 ₹11,70,560 Lowest |
| 1.05 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 7,500 | kg | 155 ₹11,62,500 | 145 ₹10,87,500 | 130 ₹9,75,000 Lowest |
| 1.06 | od56524/2021_2022 : Providing and fixing wired glass of size 220 cm x 60cm | 171.6 | sqm | 1,000 ₹1,71,600 Lowest | 2,000 ₹3,43,200 | 1,900 ₹3,26,040 |
| 1.07 | od56510/2021_2022 : Providing and fixing Windows Openable Type glazed STEEL with Friction Hinges /Fixed partition including all fittings, locking arrangement etc as per drawing and direction of Engineer at site. | 24.57 | sqm | 1,900 ₹46,683 Lowest | 3,500 ₹85,995 | 3,200 ₹78,624 |
| 1.08 | 10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover | 180 | sqm | 3,000 ₹5,40,000 Lowest | 3,200 ₹5,76,000 | 3,000 ₹5,40,000 Lowest |
| 1.09 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 500 | sqm | 120 ₹60,000 Lowest | 128 ₹64,000 | 120 ₹60,000 Lowest |
Tender Value
₹1.4 Cr
EMD Value
₹1 L
Closing Date
7 Oct 2021, 6:00 pmClosed
Manager Subcontract
KEL Kochi
REVAMPING/RENOVATION OF FACTORY BUILDING AT BHEL ELECTRICAL MACHINES Ltd , KASARGOD- PHASE 1
2021_KEL_442640_1
KRO/ BDC/942/202
Open Tender
Civil Works - Others
Item Rate
60 days
KEL Kochi
As per NIT
5 documents required · 5 mandatory
₹5,900
₹1 L
11 Oct 2021
30 Sept 2021
11 Oct 2021
30 Sept 2021
7 Oct 2021
30 Sept 2021
30 Sept 2021 - 7 Oct 2021
Amount
PLANT BUILDING
15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet
Conveyance Charges by Lorry Upto 10 KM for roofing sheets,Ridge materials , Glass materials etc complete including loading unloading charges.
od56509/2021_2022 : Providing and laying Corrugated Galvalume colour coated sheet made out of 0.50mm TCT cold rolled steel of 550 Yield strength conforming to ASTM A368 or As1397.Roofing shall be crest fixed to purlins with hot dip galvanised self drilling /self tapping screws of size (5.5x 55 mm) with integral EPDM washers. Minimum sheet over lap at end laps shall be 150mm.Penetration and end laps in sheet shall be sealed by proper sealent material. with EPDM seal, rate shall be inclusive of cost and conveyance of all materials all labour for lead, lift,scaffolding charges ,all labour charges making roof water tight with required sealand material etc complete at all levels
od56512/2021_2022 : Providing and fixing ridge/ valley capping/flashing in required width (minimum 500 mm) with plain galvalume colour coated sheet made out of 0.5mm TCT, minimum 550 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges, all taxes etc. complete at all levels as directed by Engineer-in-Charge
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
od56524/2021_2022 : Providing and fixing wired glass of size 220 cm x 60cm
od56510/2021_2022 : Providing and fixing Windows Openable Type glazed STEEL with Friction Hinges /Fixed partition including all fittings, locking arrangement etc as per drawing and direction of Engineer at site.
10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
LAVATORY MAINTENANCE (PLANT BUILDING)
od56509/2021_2022 : Providing and laying Corrugated Galvalume colour coated sheet made out of 0.50mm TCT cold rolled steel of 550 Yield strength conforming to ASTM A368 or As1397.Roofing shall be crest fixed to purlins with hot dip galvanised self drilling /self tapping screws of size (5.5x 55 mm) with integral EPDM washers. Minimum sheet over lap at end laps shall be 150mm.Penetration and end laps in sheet shall be sealed by proper sealent material. with EPDM seal, rate shall be inclusive of cost and conveyance of all materials all labour for lead, lift,scaffolding charges ,all labour charges making roof water tight with required sealand material etc complete at all levels
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
od56519/2021_2022 : Electrification works
od56544/2021_2022 : Plumbing Works
od56533/2021_2022 : Cleaning Toilets
PARKING
od56599/2021_2022 : Maintenance of roofing sheets
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
MISCELLANEOUS WORKS
2.7.2 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (requiring blasting)
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
od56511/2021_2022 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, tress etc complete
od56513/2021_2022 : Providing and fixing Aluminium Handrail in balcony
od56514/2021_2022 : Dumping Yard works
od56600/2021_2022 : Maintenance of Well
od56601/2021_2022 : Maintenance of B/W & Motor
CEMENT: Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.
RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.
STEEL : Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference
Paint : Make: Asian, Berger, Nerolas or eq. in the order of pref.
EXCLUSIVE OF GST
mohammed shafi
Peter And Company
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
BOQ_629971.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .