REPAIR/MAINTENANCE OF STREET LIGHT SYSTEM BY USING ENERGY SAVING LIGHT AND RELATED WORKS IN SOUTHERN SECTOR AT MIL STN KOTA

Amount

Supply, laying and testing LT 1100 volts grade UG cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe etc, including disconnecting and taking out old unserviceable cable, complete all as specified and directed for the following size of cables:- 25 Sqmm 4 core

16 Sqmm 4 core

10 Sqmm 2 core

6 Sqmm 2 core

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles, complete all as specified and directed.

Returning filling in soil including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm thick, complete all as specified and directed.

Removal of excavated surplus soil to a distance not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point, complete all as specified and directed.

Supply and spreading dry river sand in trenches as cushioning to under ground cable on top and bottom of cable, complete all as specified and directed. (Depth of sand shall be measured after punning)

Supply and laying pulverised fuel ash-lime bricks, old size, laid flat adjoining each other over dry sand cushioning in trenches as protection to cable, complete all as specified and directed.

S&F in renewal of terminal box made of PVC Box of size 200x160x98mm, fix on pole by means of mild steel clamps with bolt and nuts, provn for cable entry for incoming and outgoing including 01 No. MCB 6-32 Amps and one No. 4 way connector, making necessary connections, duly fixed with and including cable glands threaded type IP66/67 made of polyamide with lock nut, complete all as specified and directed.

Taking down old unserviceable PCC pole and Supply, transporting, erection and fixing steel tubular swaged pole, 9.00 metres long, type 410 SP-31, complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts, washers etc including necessary earth work and excavation, PCC in foundation 1:3:6 type C2, using 40 mm graded stone aggregate and PCC 1:2:4 type C2, using 40 mm graded stone aggregate as in plinth block, disposal of surplus soil to a distance not exceeding 50 m, painting the pole with two coats of aluminium paint over one coat of red oxide primer including 3 Nos band/straps with red post office box colour (300mm wide each) synthetic enamel paint at a distance 300mm from plinth block and marking pole numbers with black synthetic enamel paint including tarring one coat on steel surface embedded in concrete, complete all as specified and directed.

Fixing only in renewal of LED street light fittings, 230 Volt, AC, outdoor type of any Watts, fixed on Pole/wall/floor/roof with and including all accessories and connections, complete all as specified and directed. Note :- (i) LED street light fittings as specified under item shall be issued under Schedule 'B' free for fixing only. (ii) Cost of tools and plants necessary for fixing of street light fittings shall be arranged by contractor shall be deemed included in the quoted unit rate.

Taking down old unserviceable/rusted GI pipe bracket on pole/ building and S&F 40 mm bore light grade GI pipe bracket, 1.50 m long, bent to shape as required, fixed on pole/building with and including suitable mild steel flat iron clamps with required, nuts, bolts and washers, complete all as specified and directed.

Taking down old unserviceable/rusted GI pipe bracket on pole/building and S&F 32 mm bore light grade GI pipe bracket, 1.50 m long, bent to shape as required, fixed on pole/building with and including suitable mild steel flat iron clamps with required, nuts, bolts and washers, complete all as specified and directed.

Taking down old unserviceable/rusted GI pipe bracket on pole/building and S&F 25 mm bore light grade GI pipe bracket, 0.55 m long, bent to shape as required, fixed on pole/building with and including suitable mild steel flat iron clamps with required, nuts, bolts and washers, complete all as specified and directed.

S&F PVC insulated 1.50 Sqmm, single core multistranded copper conductor cable, unsheathed, 1100 volts grade, drawn through existing conduit / casing capping concealed or on surface/pole/wall including taking down existing unserviceable wire, complete all as specified and directed.

Material and labour for street light timer boards (astronomical type) 32 Amps, 3 pole, 230 Volts, suitable for out door operation, infrared sensor based as per seasonal variation of daylight complete with contactor, relay, MCB, sensor etc and including taking down existing unserviceable street light timer complete all as specified and directed

M&L for scrapping down and removing of old deteriorated paint from LT steel poles of 7.50 metre height above ground level, preparing surface for painting, applying two coat of aluminium paint upto full height of pole including MS clamps etc all as directed at site including providing 3 Nos band/straps (300mm wide each) with red post office box colour synthetic enamel paint at a distance 300mm from plinth block and marking of pole number with black synthetic enamel paint 2 meter above PCC block, letter should not be more than 6 cm high with 16 cm dia circle around the marked number, complete all as specified and directed.

Labour only for attending complaints of unserviceability of street lights, dismantling of street lights, checking fault, rectifying fault, removing carbon deposits from terminals and replacement of driver (if required), reassembling the street light and making the light functional, complete all as specified and directed. Notes: (i) Supply only of driver of LED light shall be measured and paid separately under respective item of BOQ. (ii) Contractor's electrician shall attend the complaint cell of AGE E/M to collect the complaints and making the lights functional within the timeline given by the Engineer-in-Charge but not more than two days from the receipt of the complaints, in case of failing which a penalty of Rs 500/- per day per complaint shall be imposed on the contractor for delay in rectification of street light faults. (iii) If the light is to be replaced, the same shall be measured and paid under item 9.00 (here-in-before) and no payment under this item shall be made for the same.

Supply only in renewal of LED street light driver upto hpf 1500ma suitable for existing 35 to 90 Watt LED street light fittings, as per existing Make & wattage complete all as specified and directed.

S&F in renewal of MCB SP 240 Volts, 'B' series, breaking capacity 10 KA of rating 20 Amps, complete all as specified and directed.

M/s Prem Associates

K B Enterprises