Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹9.80AWARDED | ₹9.80 | AWARDED |
Tender Value
₹22.1 L
EMD Value
₹22,200
Closing Date
2 Feb 2026, 9:30 pmClosed
Karnataka Power Corporation Limited
Procurement of Safety items
50944
KPCL/2025-26/IND2253/CALL-2
Open
KPCL Executive Engineer Purchase Office RTPS Raichur
6 documents required · 3 mandatory · 3 optional
The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s) similar to the type specified in the ‘Schedule of Requirements’ up to at least xxxx % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after xxxxx and be in satisfactory operation for xxxxx months as on date of tender opening. Certificates to be provided as per Section XII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The tenderer, as authorized representative/dealer , has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document.
The legal status, place of registration and principal place of business of the company or firm or partnership.
Details of experience and past performance of the tenderer on equipment offered and on those of similar nature within the past three/five years2 and details of current contracts in hand and other commitments.
A detailed description of the essential technical and performance characteristics of the goods.
A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser.
Item-by-item commentary on the Purchaser's Technical Specifications demonstrating substantial responsiveness of the goods and services to those specifications or a statement of deviations and exceptions to the provisions of the Technical Specifications.
The intending bidder shall have successfully supplied Safety PPEs to any government sector/ PSU/ Major power plants/Reputed private sector/ major industries amounting to not less than Rs.17.70Lakhs.(Rs.8.85Lakhs for Micro and small Enterprises) in any one year of the preceding three financial years i.e. 2022-23, 2023-24 & 2024 25 (2 year for Micro and small Enterprises i.e. 2023-24 & 2024-25). As a proof purchase order (PO) copies (Single/ Multiple (max.3)) for any one of the said financial year during which supplies are made shall be uploaded.
The intending bidder shall be Manufacturer/Authorized dealer/Supplier of Safety PPEs. As a proof bidder shall upload valid registration certificate/dealership certificate /PO issued by the Competent Authority in e portal
The average annual financial turnover of the tenderer should be not less than Rs.22.12Lakhs.(Rs.11.06Lakhs for Micro and small Enterprises) during 2021-22,2022-23,2023-24 financial years(2022-23,2023-24 financial years respect to Micro and small Enterprises). As a proof the bidder shall upload the certified copy of the Annual turnover certificate/Profit & Loss statement duly certified by the Chartered Accountant
₹500
₹22,200
16 Jan 2026
16 Jan 2026
3 Feb 2026
30 Jan 2026
Sl. No. Item Code Item Name Unit Qty Item Specifications Bidders Compliance GST% included in quoted rate HSN Code
1 4000000014 WARNING SIGN BOARD Nos 50 WARNING SIGN BOARD FOR POWER FENCE (PLASTIC) A warning sign board for a transformer fence should be include clear, standardized symbols and text. Common elements include a yellow triangle with a black border containing the universal high voltage symbol, accompanied by text such as "DANGER HIGH VOLTAGE" or "HIGH VOLTAGE" in bold, red, or black capital letters to clearly communicate the risk
2 401009020R DISPOSABLE CAPS Nos 50000 DISPOSAL HEAD CAPS. Disposable Bouffant Head Cap - 10 gsm, Nonwoven Fabric, 100 pcs - Stretchable Head Cover 21- inch.
3 401010111J HOSE FOR MECH FOAM 9 LTR Nos 50 Hose for Mechanical foam 9 Litre Capacity HSN Code : 38130000 Length of the Hose : 3/4 Meter Make : Any reputed
4 401010112J HOSE FOR MECH FOAM 50 LTR Nos 50 Hose for Mechanical foam 50 Litre capacity. Length: 3 Mtr HSN Code: 38130000 Make: Any Reputed Make.
5 401010125J HORN FOR CO2 9KG Nos 50 HORN FOR CO2 9KG. Capacity: Suitable for Co2 9Kg capacity Hsn code: 38130000 Make : Any Reputed make.
6 401010303V HOSE & HORN FOR C02 TYPE F/E Nos 50 Dicharge hose with horn for 6.8kg C02 Type Fire Extinguisher with suitable adapter Length of Hose: 1m Material for Hose: Rubberised reinforced wire Material for Horn:PVC I.D:3/8" working pressure:180br Flame resistant HSN code:39172990
7 401011806R CHAIN SAW Nos 1 Electrical driven chain saw, power consumption is 1600W,votage is 220-230 volts, Amperage is 7 Amp(app.) Arm length is 18 inches, light weight, shock proof body, Reservoir for lubricating oil for chain with required accessories.
8 401012711J ADAPTER FOR HYDRANT VALVE Nos 100 ADAPTER FOR HYDRANT VALVE Made from stainless steel grade 304 With Blank Cap.
9 401012720B WELDING BLANKET Nos 50 Welding blankets required to protect welders as well as to cover certain important materials from welding splatters.Made of asbestos product used for thermal insulation and heat protection. Burn proof, rot, mildew or deteriorate and resist most acids. It is suitable for temperature up to 550oC. Welding blankets are designed to help protect employees from welding hazards. Size: 6 ft x 6 ft with fixing hole facility for tagging
10 401013005R DISCHARGE TUBE FOR 10KG DCP. Nos 50 nylon braided discharge tube not less than 750mm length with squeeze grip suitable for 10kg. Dry Chemical Powder (DCP) fire extinguisher and shall conform to IS-2171-1999
11 401013006R DISCHARGE TUBE FOR 5KG DCP Nos 50 nylon braided discharge tube of not less than 500mm length for Dry Chemical Powder(DCP) 5kg. extinguisher shall confirm to IS-2171-1999 and provision to fit with extinguisher body
12 401013109J HOSE & HORNS FOR 4.5KG CO2 SETS 50 HOSE & HORNS FOR CO2 4.5KG CAPACITY
13 401013203R DISCHARGE HORN AND BEND FOR Nos 100 DISCHARE HORN WITH SUITABLE ADPOTER, FOR 3.2 KG CO2 FIRE EXTINGUISHERS AS PER BIS.
14 401020202D NOSE DUST MASK Nos 10000 Applicate to wear at Grinding, drilling,dust cleaning etc.Tight fit get confortabLE Brand: Venus V44ISI
15 401020504R ELECTRIC SIREN 1.5KM RANGE Nos 2 1)1.5 kms. audible diametrical range, 0.25hp, single phase,220/250 volts, 6000 rpm, 50 cycles, a.c., horizontal double mounting Siren with Weather shed (Rain Cover) suitable for above Siren. Kheraj/JEEKAY/Perfect or any standard supplier.12Months guarantee
16 401020507R INDUSTRIAL SAFTY HELMET Nos 1700 1.COMPLIENCE: It shall comply for IS 2925-1984 Reaffirmed 1995 Made up from strong, rigid, high density fiber glass dielectric material. Provided with Harness including headband, cradle and Nape strap/chin strap, ventilation holes and peak. 2.HARNESS:The material of harness shall be Sweat resistant & non irritant. Headband shall be of minimum 30 mm width and securely fixed to shell & crown straps and readily adjustable. Headband shall be fitted with anti-concussion tapes (min.19mmwidth) secured at six anchoring points, forming the cradle (All strips stitched at center). Strap shall ensure a clearance of at least 30 mm between the top of the wearers head and inside top of harness crown. 3.CHIN STRAP/NAPE STRAP: The helmet shall be provided with either Chin strap or Nape strap. Shall have minimum 19 mm width with adjustment device to maintain tension. The nape strap shall be integral part of headband and adjustable. 4.WEIGHT: Mass of complete helmet shall not exceed 400gms. 5.SAMPLE: The sample shall be supplied along with offer for approval. 6.TEST CERTIFICATE: The supplier shall submit the test certificate along with bulk supply as IS for Heat Resistance, Flammable Resistance, Electric Resistance, Impact Resistance & Water Absorption. The test certificate shall include PO No, Batch No & Date. 7.PACKING: The helmet shall be supplied, packed individually for protection from dust and damage. 8.MARKING: The helmets shall be embossed with ISI & DGMS marks, Batch No, Month& year of manufacture, KPCL emblem shall be embossed at the front side of the helmet in size 40mmX30mm and "RTPS" text shall be embossed at the back side of the helmet in size 35mmX15 mm 9.GUARANTEE CERTIFICATE: The guarantee certificate shall be given for any manufacturing defects along with its consignment for free replacement within six months from the date of receipt at stores.
17 401020602R PVC EAR PLUGS Nos 1000 Made up of Soft Hypoallergic foam ,CLI approved & comply to BIS(IS9167-1979) & IS(6229-1971),cord made up of cotton (sample to be furnished)
18 401030201R ACID PROOF GOGGLES Nos 100 Acid (H2SO4 & HCL)/chemical Resistant GOGGLES Product conforming with EN166 and ANSIZ87.1 standards, and has passed ISO9002 quality certification
19 401050107J SAFETY HAND GLOVES-DOTTED SETS 500 Safety hand gloves Make:3M/ Reputed Type: Cotton knitted with rubber dots 1 SET=1 PAIR
20 401050163J CHEMICAL RESISTANT HAND GLOVE Nos 200 Rs-Blue chemical resistant nitrile powder Free disposable gloves Size : 8.5-L Brand -R.S HS Code: 40159030
21 401050208Y LEATHER HAND GLOVES SETS 500 INDUSTRIAL SAFETY-LEATHER WORKING PALM GLOVES A SET CONTAINS LEFT AND RIGHT GLOVES EACH 1 SET=1 PAIR
22 401050304G INDUSTRIAL SAFETY GLOVES PAIR 1000 INDUSTRIAL SAFETY GLOVES- MADE OF LEATHER Conform to IS 6994 (Part 1) Industrial Safety Gloves, Leather
23 401070701D MAINTENANCE SAFETY TAG 1 Nos 1000 "DO NOT OPERATE" Safety Tag; Legend:DANGER, DO NOT OPERATE, MEN WORKING ON MACHINERY; Tag size: 6" x 3.25" ; Material:Hefty 1.5 mil thick Vinyl material out last others; 3/8"brass grommet for cable tie; Tag shall reusable & waterproof; Viny is loaded with UV inhibitors
24 401070702D MAINTENANCE SAFETY TAG 2 Nos 1000 "OUT OF SERVICE" Safety Tag; Legend:DANGER, OUT OF SERVICE; Tag size: 6" x 3.25" ; Material:Hefty 1.5 mil thick Vinyl material out last others; 3/8"brass grommet for cable tie; Tag shall reusable & waterproof; Viny is loaded with UV inhibitors;
25 401080402R INSULATED MATS Nos 50 TECHNICAL SPECIFICATION:AS PER IS 15652- 2006 1. SIZE OF MAT: 1 MTR X 2 MTR. 2. FINISH: ONE SIDE PLAIN AND OTHER SIDE CHEQURED. 3. INSULATION RESISTANCE WITH WATER: 10,00,000 MEGA OHMS MINIMUNM. 4. LEAKAGE CURRENT:10 MICRO AMPS(MAXIMUM). 5. FLAME RETARDANT TO FIRE. 6. LOW TEMPERATURE RESISTANCE:NO TEAR, BREAK OR CRACK SHALL BE OBSERVED UNDER FORCE OF 100N FOR 30 HOURS AT 40+-3 DEG C. 7. CLASS A MATS 3.0 MM THICK, DIELECTRIC STRENGTH 50 KV WITH SHALL WITHSTAND 3.3 KV RMS OF SIZE 1 M X 2 M.
26 401080500B WIND SOCKS SETS 20 WIND SOCKS WITH STAND. Windsock revolving basket:Galvanised steel basket, pivoting Mounting:ND - Fixed ground base Color:Orange and White Windsock speed charts: 6 knots
27 401081702R DISPOSABLE FACE MASK Nos 100000 IS 14166:1994 Face mask with nose clip and elastic ear loops with 3 ply
28 401190101R BARRICADE CONE Nos 50 Plastic Red and white stripes barricde cone Hight:750mm,Bottom Square/Hexagonal:385 mm,Weight:3 Kg,+ 4"highly reflective positioned sleeve,tear resistant Material : PU Plastic Shape : Conical
29 401190110B SAFETY GOGGLES Nos 2000 SAFETY GLASS:ANTIFOGGING, ANTISCRATCH AND ANTI STATIC WITH A 99% U V PROTECTION MEETS ANSI:Z87.1 2003 / X-TREND,9177865 UVEX:CLEAR VISION,WEAR PROTECTION,WITH X-STREAM TECHNOLOGY, LOW ENERGY IMPACT "F"(45M/S), MEETS DIN EN 166 / PHOENIX-UD71: COMPLETE WRAP AROUND IN DESIGN,CLEAR VISION MEETS ANSI-Z87.1 HIGH IMPACT STANDARDS, EN 166 CE. MAKE:DELTA TEST AND MEASUREMENTS / UNICARE / UDYOGI
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Technical Specification.xlsx
Others - Technical Specification • 0.16 MB
General terms and condition.docx
Others - General terms & conditions • 0.03 MB
Declaration.docx
Others - Declaration • 0.01 MB
PQR.docx
Others - PQR • 0.02 MB
Download all tender documents and submit your bid