Providing, Supplying, Lowering Laying And Jointing Of Water Supply Pipeline In Various Wards Of Songadh Nagarpalika

Providing, Supplying, Lowering Laying And Jointing Of Water Supply Pipeline In Various Wards Of Songadh Nagarpalika

SCHEDULE - B1 (Ward 1)

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

1 Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring

fit joint including cost of rings, as per IS specification no.

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete.1.One

coupler / ring shall be provided with each full length pipe cost

of which is included in rates below. 2. 3% (Three)

Discounted rate to be consider for Coupler jointed pipe

Rate for PVC Resin as Rs. 91739/MT

1550.00 110 mm dia 10 KGF PVC PIPE 320.00 Rupees Three Hundred Twenty Only Rmt

2 1.00 Providing and supplying at store or site of work incl. fright 24800.00 Rupees TwentyFour Thousand Eight Job

loading, unloading, stacking, insurance and all taxes etc Hundred Only

complete (ex PVC Tail Piece with PVC flange (ISI) Heavy

duty moulded , PVC Reducer (Moulded) etc )

3 Providing and supplying ISI mark CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

PN-1.6 with hand wheel/ cap oprated (PD type short body)

5.00 (A) 200 mm Dia 10295.00 Rupees Ten Thousand Two Hundred Rmt

NinetyFive Only

5.00 (B) 110 mm Dia 3698.00 Rupees Three Thousand Six Hundred Rmt

NinetyEight Only

5.00 (C) 150 mm Dia 5857.00 Rupees Five Thousand Eight Hundred Rmt

FiftySeven Only

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

4 Providing and supplying C. I. Air valves of approved make &

quality of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

40 loading, unloading, conveyance to departmental

mm (DS2) 2013.00 Rupees Two Thousand Thirteen Only No

5 Excavation for pipe line trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions

mt. and stacking excavated stuff including up to all

155.00 A) In all sorts of soil and soft murrum 102.35 Rupees One Hundred Two Paise ThirtyFive Cum

155.00 B) In hard murrum 155.25 Rupees One Hundred FiftyFive Paise Cum

TwentyFive Only

155.00 C) In soft rock 187.45 Rupees One Hundred EightySeven Paise Cum

FourtyFive Only

124.00 D) In hard rock or C.C. 1:2:4 or RCC with blasting and 427.80 Rupees Four Hundred TwentySeven Paise Cum

chiseling Eighty Only

6 Excavation in bituminous road as per required gradiant and

line including safety provisions using site rails and stacking

excavated stuff including upto all required lead cleaning the

site etc complete for all lifts as specified

250.00 (a) Excavation in Bituminous Road 288.65 Rupees Two Hundred EightyEight Paise Cum

7 Lowering, laying and jointing PVC pipes and specials of

following class and diameter including cost of conveyance

from stores to site of works including cost of labour, material,

PIPEsatisfactory hydraulic testing as 21.85 Rupees TwentyOne Paise EightyFive Only Rmt

8 Lowering, laying and jointing in position following C.I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, icluding nut

bolts and giving satisfactory hydraulic testing , etc. compete.

Sluice valves, Butterfly valves, Reflux valves

5.00 (A) 200 mm Dia 853.30 Rupees Eight Hundred FiftyThree Paise No

5.00 110 mm Dia 504.85 Rupees Five Hundred Four Paise EightyFive No

5.00 150 mm Dia 672.75 Rupees Six Hundred SeventyTwo Paise No

SeventyFive Only

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

9 Construction of valves chambers in brick, locally available in

C.M. 1:6 foundation concrete 150 mm thick in C.C. 1:4:8 of

5.00 trap metal

Size 0.60 msize 25 mm

40 mm thick, inside cement plaster

m deep 5908.70 Rupees Five Thousand Nine Hundred Eight No

Paise Seventy Only

10 5.00 Erection of airvalve riser by installing new M.S pipe of 6mm 3578.80 Rupees Three Thousand Five Hundred No

thick and 3.2mt length with necessary fittings such as flamge SeventyEight Paise Eighty Only

of appropriate size, nut bolts and embedded the pipe in R.C.C

M:15 with offset of 10cm around pipe with necessary steel

etc.complete. Dia of air valve 50mm and MS pipe

11 528.16 Refilling the pipeline trenches including ramming, watering, 25.30 Rupees TwentyFive Paise Thirty Only Cum

consolidating desposal of surplus stuff as directed within a

radius of 3 km.

12 25.00 Providing and supplying D. I. K-9 grade pipes for following 3898.00 Rupees Three Thousand Eight Hundred Rmt

nominal bore diameter with internal cement mortar lining NinetyEight Only

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS 8329-2000).

Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022. 200mm

13 25.00 Providing and making flanged joints to flanged DI / C.I. pipes 962.55 Rupees Nine Hundred SixtyTwo Paise Rmt

of all classes specials etc. including cost of all jointing FiftyFive Only

materials rubber packing, nut bolts, inclduing lowering laying

jointing labour hydraulic testing etc. complete.

14 5.00 Manufacture supply and delivery of cast iron detachable 601.00 Rupees Six Hundred One Only No

(short & long) complete with joint flanges duly drilled

sunthetic rubber sealing rings manufactured from styrene

butadine rubber(SBR) and other required accessories such as

nut bolts etc conforming to IS 8794-1988 or its latest revision

if any suitable for use with AC tressure pipes delivery of

joints including its accessories including loading unloading

carting stacking insurance all taxes octroi etc complete.Long

collar over size suitable to PVC/HDPE (10kg/cm2).200 mm

15 200.00 MS specials.MS specials flange ends upto 300 mm dia 98.00 Rupees NinetyEight Only Kg

16 Supplying of various materials.Supplying following materials

including all taxes and carting

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

16 more or less Rs. estimated quantity

200.00 3.2 Solvent cement 268.00 Rupees Two Hundred SixtyEight Only Ltr

200.00 3.3 Bolts and washers for valve 63.00 Rupees SixtyThree Only Kg

200.00 3.5 Rubber packing normal 80.00 Rupees Eighty Only Kg

200.00 3.6 Rubber packing Neoprene type 156.00 Rupees One Hundred FiftySix Only Kg

17 200.00 Providing and fixing at site of work MS iron channels, angles, 72.00 Rupees SeventyTwo Only Kg

iron rails with Rly, fright loading unloading carting and all

taxes etc complete as directed including paints 2 coats etc

18 5.00 Stop valves/cocks. Providing & fixing gun metal check or 821.00 Rupees Eight Hundred TwentyOne Only No

non return full-way wheel valve. 50 mm

19 775.00 Refitting of inteloking paver block of thick 80 mm/60 mm on 183.82 Rupees One Hundred EightyThree Paise Sqm

50 mm thick layer of Sand ramming watering and EightyTwo Only

compcacting the layer etc, comp. After placing of conc. block

surface completeion have to be done and all the joint to be

filed with fines sand particles as per directed by Engineer in

20 1.00 Job work for DI line to DI/HDPE, PVC to PVC ,PVC to DI 11500.00 Rupees Eleven Thousand Five Hundred Each

Line connection with appropriate materials,labour etc Only

SCHEDULE - B1 (Ward 1)

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

SCHEDULE - B2 (Ward 2)

1 Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring

fit joint including cost of rings, as per IS specification no.

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete.1.One

coupler / ring shall be provided with each full length pipe cost

of which is included in rates below. 2. 3% (Three)

Discounted rate to be consider for Coupler jointed pipe

Rate for PVC Resin as Rs. 91739/MT

3000.00 (A) 110 mm dia 10 KGF PVC PIPE 320.00 Rupees Three Hundred Twenty Only Rmt

605.00 (B) 160 mm dia 10 KGF PVC PIPE 672.00 Rupees Six Hundred SeventyTwo Only Rmt

2 1.00 Providing and supplying at store or site of work incl. fright 48000.00 Rupees FourtyEight Thousand Only Job

loading, unloading, stacking, insurance and all taxes etc

complete (ex PVC Tail Piece with PVC flange (ISI) Heavy

duty moulded , PVC Reducer (Moulded) etc )

3 Providing and supplying ISI mark CI D/F Sluice Valves as per .

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

PN-1.6 with hand wheel/ cap oprated (PD type short body)

15.00 (A) 200 mm Dia 10295.00 Rupees Ten Thousand Two Hundred No

NinetyFive Only

15.00 (B) 110 mm Dia 3698.00 Rupees Three Thousand Six Hundred No

NinetyEight Only

15.00 (C) 150 mm Dia 5857.00 Rupees Five Thousand Eight Hundred No

FiftySeven Only

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

4 Providing and supplying C. I. Air valves of approved make &

quality of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

40 loading, unloading, conveyance to departmental

mm (DS2) 2013.00 Rupees Two Thousand Thirteen Only No

5 Excavation for pipe line trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions

mt. and stacking excavated stuff including up to all

360.50 A) In all sorts of soil and soft murrum 102.35 Rupees One Hundred Two Paise ThirtyFive Cum

360.50 B) In hard murrum 155.25 Rupees One Hundred FiftyFive Paise Cum

TwentyFive Only

360.50 C) In soft rock 187.45 Rupees One Hundred EightySeven Paise Cum

FourtyFive Only

288.40 D) In hard rock or C.C. 1:2:4 or RCC with blasting and 427.80 Rupees Four Hundred TwentySeven Paise Cum

chiseling Eighty Only

6 Excavation in bituminous road as per required gradiant and

line including safety provisions using site rails and stacking

excavated stuff including upto all required lead cleaning the

site etc complete for all lifts as specified

500.00 (a) Excavation in Bituminous Road 288.65 Rupees Two Hundred EightyEight Paise Cum

7 Lowering, laying and jointing PVC pipes and specials of

following class and diameter including cost of conveyance

from stores to site of works including cost of labour, material,

PVC satisfactory

PIPE hydraulic testing as 21.85 Rupees TwentyOne Paise EightyFive Only Rmt

605.00 (B) 160 mm dia 10 KGF PVC PIPE 32.20 Rupees ThirtyTwo Paise Twenty Only Rmt

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

8 Lowering, laying and jointing in position following C.I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, icluding nut

bolts and giving satisfactory hydraulic testing , etc. compete.

Sluice valves, Butterfly valves, Reflux valves

15.00 (A) 200 mm Dia 853.30 Rupees Eight Hundred FiftyThree Paise No

15.00 110 mm Dia 504.85 Rupees Five Hundred Four Paise EightyFive No

15.00 150 mm Dia 672.75 Rupees Six Hundred SeventyTwo Paise No

SeventyFive Only

9 Construction of valves chambers in brick, locally available in

C.M. 1:6 foundation concrete 150 mm thick in C.C. 1:4:8 of

8.00 trap metal

Size 0.60 msize 25 mm

40 mm thick, inside cement plaster

m deep 5908.70 Rupees Five Thousand Nine Hundred Eight No

Paise Seventy Only

10 8.00 Erection of airvalve riser by installing new M.S pipe of 6mm 3578.80 Rupees Three Thousand Five Hundred No

thick and 3.2mt length with necessary fittings such as flamge SeventyEight Paise Eighty Only

of appropriate size, nut bolts and embedded the pipe in R.C.C

M:15 with offset of 10cm around pipe with necessary steel

etc.complete. Dia of air valve 50mm and MS pipe

11 1228.40 Refilling the pipeline trenches including ramming, watering, 25.30 Rupees TwentyFive Paise Thirty Only Cum

consolidating desposal of surplus stuff as directed within a

radius of 3 km.

12 50.00 Providing and supplying D. I. K-9 grade pipes for following 3898.00 Rupees Three Thousand Eight Hundred Rmt

nominal bore diameter with internal cement mortar lining NinetyEight Only

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS 8329-2000).

Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022. 200mm

13 50.00 Providing and making flanged joints to flanged DI / C.I. pipes 962.55 Rupees Nine Hundred SixtyTwo Paise Rmt

of all classes specials etc. including cost of all jointing FiftyFive Only

materials rubber packing, nut bolts, inclduing lowering laying

jointing labour hydraulic testing etc. complete.

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

14 15.00 Manufacture supply and delivery of cast iron detachable 601.00 Rupees Six Hundred One Only No

(short & long) complete with joint flanges duly drilled

sunthetic rubber sealing rings manufactured from styrene

butadine rubber(SBR) and other required accessories such as

nut bolts etc conforming to IS 8794-1988 or its latest revision

if any suitable for use with AC tressure pipes delivery of

joints including its accessories including loading unloading

carting stacking insurance all taxes octroi etc complete.Long

collar over size suitable to PVC/HDPE (10kg/cm2).200 mm

15 300.00 MS specials.MS specials flange ends upto 300 mm dia 98.00 Rupees NinetyEight Only Kg

16 Supplying of various materials.Supplying following materials

including all taxes and carting

300.00 3.2 Solvent cement 268.00 Rupees Two Hundred SixtyEight Only Ltr

300.00 3.3 Bolts and washers for valve 63.00 Rupees SixtyThree Only Kg

300.00 3.5 Rubber packing normal 80.00 Rupees Eighty Only Kg

300.00 3.6 Rubber packing Neoprene type 156.00 Rupees One Hundred FiftySix Only Kg

17 300.00 Providing and fixing at site of work MS iron channels, angles, 72.00 Rupees SeventyTwo Only Kg

iron rails with Rly, fright loading unloading carting and all

taxes etc complete as directed including paints 2 coats etc

18 10.00 Stop valves/cocks. Providing & fixing gun metal check or 821.00 Rupees Eight Hundred TwentyOne Only No

non return full-way wheel valve. 50 mm

19 1802.50 Refitting of inteloking paver block of thick 80 mm/60 mm on 183.82 Rupees One Hundred EightyThree Paise Sqm

50 mm thick layer of Sand ramming watering and EightyTwo Only

compcacting the layer etc, comp. After placing of conc. block

surface completeion have to be done and all the joint to be

filed with fines sand particles as per directed by Engineer in

20 1.00 Job work for DI line to DI/HDPE, PVC to PVC ,PVC to DI 11500.00 Rupees Eleven Thousand Five Hundred Each

Line connection with appropriate materials,labour etc Only

SCHEDULE - B2 (Ward 2)

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

SCHEDULE - B3 (Ward 3)

1 Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring

fit joint including cost of rings, as per IS specification no.

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete.1.One

coupler / ring shall be provided with each full length pipe cost

of which is included in rates below. 2. 3% (Three)

Discounted rate to be consider for Coupler jointed pipe

Rate for PVC Resin as Rs. 91739/MT

3240.00 110 mm dia 10 KGF PVC PIPE 320.00 Rupees Three Hundred Twenty Only Rmt

2 1.00 Providing and supplying at store or site of work incl. fright 51840.00 Rupees FiftyOne Thousand Eight Hundred Job

loading, unloading, stacking, insurance and all taxes etc Fourty Only

complete (ex PVC Tail Piece with PVC flange (ISI) Heavy

duty moulded , PVC Reducer (Moulded) etc )

3 Providing and supplying ISI mark CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

PN-1.6 with hand wheel/ cap oprated (PD type short body)

20.00 (A) 200 mm Dia 10295.00 Rupees Ten Thousand Two Hundred Rmt

NinetyFive Only

20.00 (B) 110 mm Dia 3698.00 Rupees Three Thousand Six Hundred Rmt

NinetyEight Only

20.00 (C) 150 mm Dia 5857.00 Rupees Five Thousand Eight Hundred Rmt

FiftySeven Only

4 Providing and supplying C. I. Air valves of approved make &

quality of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

20.00 charges, loading, unloading, conveyance to departmental

40 mm (DS2) 2013.00 Rupees Two Thousand Thirteen Only No

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

5 Excavation for pipe line trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions

mt. and stacking excavated stuff including up to all

324.00 A) In all sorts of soil and soft murrum 102.35 Rupees One Hundred Two Paise ThirtyFive Cum

324.00 B) In hard murrum 155.25 Rupees One Hundred FiftyFive Paise Cum

TwentyFive Only

324.00 C) In soft rock 187.45 Rupees One Hundred EightySeven Paise Cum

FourtyFive Only

259.20 D) In hard rock or C.C. 1:2:4 or RCC with blasting and 427.80 Rupees Four Hundred TwentySeven Paise Cum

chiseling Eighty Only

6 Excavation in bituminous road as per required gradiant and

line including safety provisions using site rails and stacking

excavated stuff including upto all required lead cleaning the

site etc complete for all lifts as specified

500.00 (a) Excavation in Bituminous Road 288.65 Rupees Two Hundred EightyEight Paise Cum

7 Lowering, laying and jointing PVC pipes and specials of

following class and diameter including cost of conveyance

from stores to site of works including cost of labour, material,

PIPEsatisfactory hydraulic testing as 21.85 Rupees TwentyOne Paise EightyFive Only Rmt

8 Lowering, laying and jointing in position following C.I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, icluding nut

bolts and giving satisfactory hydraulic testing , etc. compete.

Sluice valves, Butterfly valves, Reflux valves

20.00 (A) 200 mm Dia 853.30 Rupees Eight Hundred FiftyThree Paise No

20.00 110 mm Dia 504.85 Rupees Five Hundred Four Paise EightyFive No

20.00 150 mm Dia 672.75 Rupees Six Hundred SeventyTwo Paise No

SeventyFive Only

9 Construction of valves chambers in brick, locally available in

C.M. 1:6 foundation concrete 150 mm thick in C.C. 1:4:8 of

10.00 trap metal

Size 0.60 msize 25 mm

40 mm thick, inside cement plaster

m deep 5908.70 Rupees Five Thousand Nine Hundred Eight No

Paise Seventy Only

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

10 10.00 Erection of airvalve riser by installing new M.S pipe of 6mm 3578.80 Rupees Three Thousand Five Hundred No

thick and 3.2mt length with necessary fittings such as flamge SeventyEight Paise Eighty Only

of appropriate size, nut bolts and embedded the pipe in R.C.C

M:15 with offset of 10cm around pipe with necessary steel

etc.complete. Dia of air valve 50mm and MS pipe

11 1104.03 Refilling the pipeline trenches including ramming, watering, 25.30 Rupees TwentyFive Paise Thirty Only Cum

consolidating desposal of surplus stuff as directed within a

radius of 3 km.

12 25.00 Providing and supplying D. I. K-9 grade pipes for following 3898.00 Rupees Three Thousand Eight Hundred Rmt

nominal bore diameter with internal cement mortar lining NinetyEight Only

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS 8329-2000).

Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022. 200mm

13 25.00 Providing and making flanged joints to flanged DI / C.I. pipes 962.55 Rupees Nine Hundred SixtyTwo Paise Rmt

of all classes specials etc. including cost of all jointing FiftyFive Only

materials rubber packing, nut bolts, inclduing lowering laying

jointing labour hydraulic testing etc. complete.

14 20.00 Manufacture supply and delivery of cast iron detachable 601.00 Rupees Six Hundred One Only No

(short & long) complete with joint flanges duly drilled

sunthetic rubber sealing rings manufactured from styrene

butadine rubber(SBR) and other required accessories such as

nut bolts etc conforming to IS 8794-1988 or its latest revision

if any suitable for use with AC tressure pipes delivery of

joints including its accessories including loading unloading

carting stacking insurance all taxes octroi etc complete.Long

collar over size suitable to PVC/HDPE (10kg/cm2).200 mm

15 500.00 MS specials.MS specials flange ends upto 300 mm dia 98.00 Rupees NinetyEight Only Kg

16 Supplying of various materials.Supplying following materials

including all taxes and carting

500.00 3.2 Solvent cement 268.00 Rupees Two Hundred SixtyEight Only Ltr

500.00 3.3 Bolts and washers for valve 63.00 Rupees SixtyThree Only Kg

500.00 3.5 Rubber packing normal 80.00 Rupees Eighty Only Kg

500.00 3.6 Rubber packing Neoprene type 156.00 Rupees One Hundred FiftySix Only Kg

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

17 500.00 Providing and fixing at site of work MS iron channels, angles, 72.00 Rupees SeventyTwo Only Kg

iron rails with Rly, fright loading unloading carting and all

taxes etc complete as directed including paints 2 coats etc

18 20.00 Stop valves/cocks. Providing & fixing gun metal check or 821.00 Rupees Eight Hundred TwentyOne Only No

non return full-way wheel valve. 50 mm

19 1620.00 Refitting of inteloking paver block of thick 80 mm/60 mm on 183.82 Rupees One Hundred EightyThree Paise Sqm

50 mm thick layer of Sand ramming watering and EightyTwo Only

compcacting the layer etc, comp. After placing of conc. block

surface completeion have to be done and all the joint to be

filed with fines sand particles as per directed by Engineer in

20 1.00 Job work for DI line to DI/HDPE, PVC to PVC ,PVC to DI 11500.00 Rupees Eleven Thousand Five Hundred Each

Line connection with appropriate materials,labour etc Only

SCHEDULE - B3 (Ward 3)

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

SCHEDULE - B4 (Ward 4)

1 Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring

fit joint including cost of rings, as per IS specification no.

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete.1.One

coupler / ring shall be provided with each full length pipe cost

of which is included in rates below. 2. 3% (Three)

Discounted rate to be consider for Coupler jointed pipe

Rate for PVC Resin as Rs. 91739/MT

640.00 110 mm dia 10 KGF PVC PIPE 320.00 Rupees Three Hundred Twenty Only Rmt

2 1.00 Providing and supplying at store or site of work incl. fright 10240.00 Rupees Ten Thousand Two Hundred Fourty Job

loading, unloading, stacking, insurance and all taxes etc Only

complete (ex PVC Tail Piece with PVC flange (ISI) Heavy

duty moulded , PVC Reducer (Moulded) etc )

3 Providing and supplying ISI mark CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

PN-1.6 with hand wheel/ cap oprated (PD type short body)

3.00 (A) 200 mm Dia 10295.00 Rupees Ten Thousand Two Hundred Rmt

NinetyFive Only

3.00 (B) 110 mm Dia 3698.00 Rupees Three Thousand Six Hundred Rmt

NinetyEight Only

3.00 (C) 150 mm Dia 5857.00 Rupees Five Thousand Eight Hundred Rmt

FiftySeven Only

4 Providing and supplying C. I. Air valves of approved make &

quality of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

3.00 charges, loading, unloading, conveyance to departmental

40 mm (DS2) 2013.00 Rupees Two Thousand Thirteen Only No

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

5 Excavation for pipe line trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions

mt. and stacking excavated stuff including up to all

64.00 A) In all sorts of soil and soft murrum 102.35 Rupees One Hundred Two Paise ThirtyFive Cum

64.00 B) In hard murrum 155.25 Rupees One Hundred FiftyFive Paise Cum

TwentyFive Only

64.00 C) In soft rock 187.45 Rupees One Hundred EightySeven Paise Cum

FourtyFive Only

51.20 D) In hard rock or C.C. 1:2:4 or RCC with blasting and 427.80 Rupees Four Hundred TwentySeven Paise Cum

chiseling Eighty Only

6 Excavation in bituminous road as per required gradiant and

line including safety provisions using site rails and stacking

excavated stuff including upto all required lead cleaning the

site etc complete for all lifts as specified

100.00 (a) Excavation in Bituminous Road 288.65 Rupees Two Hundred EightyEight Paise Cum

7 Lowering, laying and jointing PVC pipes and specials of

following class and diameter including cost of conveyance

from stores to site of works including cost of labour, material,

PIPEsatisfactory hydraulic testing as 21.85 Rupees TwentyOne Paise EightyFive Only Rmt

8 Lowering, laying and jointing in position following C.I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, icluding nut

bolts and giving satisfactory hydraulic testing , etc. compete.

Sluice valves, Butterfly valves, Reflux valves

3.00 (A) 200 mm Dia 853.30 Rupees Eight Hundred FiftyThree Paise No

3.00 110 mm Dia 504.85 Rupees Five Hundred Four Paise EightyFive No

3.00 150 mm Dia 672.75 Rupees Six Hundred SeventyTwo Paise No

SeventyFive Only

9 Construction of valves chambers in brick, locally available in

C.M. 1:6 foundation concrete 150 mm thick in C.C. 1:4:8 of

2.00 trap metal

Size 0.60 msize 25 mm

40 mm thick, inside cement plaster

m deep 5908.70 Rupees Five Thousand Nine Hundred Eight No

Paise Seventy Only

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

10 2.00 Erection of airvalve riser by installing new M.S pipe of 6mm 3578.80 Rupees Three Thousand Five Hundred No

thick and 3.2mt length with necessary fittings such as flamge SeventyEight Paise Eighty Only

of appropriate size, nut bolts and embedded the pipe in R.C.C

M:15 with offset of 10cm around pipe with necessary steel

etc.complete. Dia of air valve 50mm and MS pipe

11 218.08 Refilling the pipeline trenches including ramming, watering, 25.30 Rupees TwentyFive Paise Thirty Only Cum

consolidating desposal of surplus stuff as directed within a

radius of 3 km.

12 5.00 Providing and supplying D. I. K-9 grade pipes for following 3898.00 Rupees Three Thousand Eight Hundred Rmt

nominal bore diameter with internal cement mortar lining NinetyEight Only

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS 8329-2000).

Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022. 200mm

13 5.00 Providing and making flanged joints to flanged DI / C.I. pipes 962.55 Rupees Nine Hundred SixtyTwo Paise Rmt

of all classes specials etc. including cost of all jointing FiftyFive Only

materials rubber packing, nut bolts, inclduing lowering laying

jointing labour hydraulic testing etc. complete.

14 5.00 Manufacture supply and delivery of cast iron detachable 601.00 Rupees Six Hundred One Only No

(short & long) complete with joint flanges duly drilled

sunthetic rubber sealing rings manufactured from styrene

butadine rubber(SBR) and other required accessories such as

nut bolts etc conforming to IS 8794-1988 or its latest revision

if any suitable for use with AC tressure pipes delivery of

joints including its accessories including loading unloading

carting stacking insurance all taxes octroi etc complete.Long

collar over size suitable to PVC/HDPE (10kg/cm2).200 mm

15 100.00 MS specials.MS specials flange ends upto 300 mm dia 98.00 Rupees NinetyEight Only Kg

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

16 Supplying of various materials.Supplying following materials

including all taxes and carting

100.00 3.2 Solvent cement 268.00 Rupees Two Hundred SixtyEight Only Ltr

100.00 3.3 Bolts and washers for valve 63.00 Rupees SixtyThree Only Kg

100.00 3.5 Rubber packing normal 80.00 Rupees Eighty Only Kg

100.00 3.6 Rubber packing Neoprene type 156.00 Rupees One Hundred FiftySix Only Kg

17 100.00 Providing and fixing at site of work MS iron channels, angles, 72.00 Rupees SeventyTwo Only Kg

iron rails with Rly, fright loading unloading carting and all

taxes etc complete as directed including paints 2 coats etc

18 2.00 Stop valves/cocks. Providing & fixing gun metal check or 821.00 Rupees Eight Hundred TwentyOne Only No

non return full-way wheel valve. 50 mm

19 320.00 Refitting of inteloking paver block of thick 80 mm/60 mm on 183.82 Rupees One Hundred EightyThree Paise Sqm

50 mm thick layer of Sand ramming watering and EightyTwo Only

compcacting the layer etc, comp. After placing of conc. block

surface completeion have to be done and all the joint to be

filed with fines sand particles as per directed by Engineer in

20 1.00 Job work for DI line to DI/HDPE, PVC to PVC ,PVC to DI 11500.00 Rupees Eleven Thousand Five Hundred Each

Line connection with appropriate materials,labour etc Only

SCHEDULE - B4 (Ward 4)

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

SCHEDULE - B5 (Ward 7)

1 Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring

fit joint including cost of rings, as per IS specification no.

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete.1.One

coupler / ring shall be provided with each full length pipe cost

of which is included in rates below. 2. 3% (Three)

Discounted rate to be consider for Coupler jointed pipe

Rate for PVC Resin as Rs. 91739/MT

810.00 (A) 110 mm dia 10 KGF PVC PIPE 320.00 Rupees Three Hundred Twenty Only Rmt

1650.00 (B) 160 mm dia 10 KGF PVC PIPE 672.00 Rupees Six Hundred SeventyTwo Only Rmt

2 1.00 Providing and supplying at store or site of work incl. fright 12960.00 Rupees Twelve Thousand Nine Hundred Job

loading, unloading, stacking, insurance and all taxes etc Sixty Only

complete (ex PVC Tail Piece with PVC flange (ISI) Heavy

duty moulded , PVC Reducer (Moulded) etc )

3 Providing and supplying ISI mark CI D/F Sluice Valves as per .

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

PN-1.6 with hand wheel/ cap oprated (PD type short body)

10.00 (A) 200 mm Dia 10295.00 Rupees Ten Thousand Two Hundred No

NinetyFive Only

10.00 (B) 110 mm Dia 3698.00 Rupees Three Thousand Six Hundred No

NinetyEight Only

10.00 (C) 150 mm Dia 5857.00 Rupees Five Thousand Eight Hundred No

FiftySeven Only

4 Providing and supplying C. I. Air valves of approved make &

quality of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

10.00 charges, loading, unloading, conveyance to departmental

40 mm (DS2) 2013.00 Rupees Two Thousand Thirteen Only No

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

5 Excavation for pipe line trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions

mt. and stacking excavated stuff including up to all

184.00 A) In all sorts of soil and soft murrum 102.35 Rupees One Hundred Two Paise ThirtyFive Cum

184.00 B) In hard murrum 155.25 Rupees One Hundred FiftyFive Paise Cum

TwentyFive Only

184.00 C) In soft rock 187.45 Rupees One Hundred EightySeven Paise Cum

FourtyFive Only

147.20 D) In hard rock or C.C. 1:2:4 or RCC with blasting and 427.80 Rupees Four Hundred TwentySeven Paise Cum

chiseling Eighty Only

6 Excavation in bituminous road as per required gradiant and

line including safety provisions using site rails and stacking

excavated stuff including upto all required lead cleaning the

site etc complete for all lifts as specified

100.00 (a) Excavation in Bituminous Road 288.65 Rupees Two Hundred EightyEight Paise Cum

7 Lowering, laying and jointing PVC pipes and specials of

following class and diameter including cost of conveyance

from stores to site of works including cost of labour, material,

PVC satisfactory

PIPE hydraulic testing as 21.85 Rupees TwentyOne Paise EightyFive Only Rmt

1650.00 (B) 160 mm dia 10 KGF PVC PIPE 32.20 Rupees ThirtyTwo Paise Twenty Only Rmt

8 Lowering, laying and jointing in position following C.I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, icluding nut

bolts and giving satisfactory hydraulic testing , etc. compete.

Sluice valves, Butterfly valves, Reflux valves

10.00 (A) 200 mm Dia 853.30 Rupees Eight Hundred FiftyThree Paise No

10.00 110 mm Dia 504.85 Rupees Five Hundred Four Paise EightyFive No

10.00 150 mm Dia 672.75 Rupees Six Hundred SeventyTwo Paise No

SeventyFive Only

9 Construction of valves chambers in brick, locally available in

C.M. 1:6 foundation concrete 150 mm thick in C.C. 1:4:8 of

0.60 msize 25 mm

40 mm thick, inside cement plaster

m deep 5908.70 Rupees Five Thousand Nine Hundred Eight No

Paise Seventy Only

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

10 5.00 Erection of airvalve riser by installing new M.S pipe of 6mm 3578.80 Rupees Three Thousand Five Hundred No

thick and 3.2mt length with necessary fittings such as flamge SeventyEight Paise Eighty Only

of appropriate size, nut bolts and embedded the pipe in R.C.C

M:15 with offset of 10cm around pipe with necessary steel

etc.complete. Dia of air valve 50mm and MS pipe

11 626.98 Refilling the pipeline trenches including ramming, watering, 25.30 Rupees TwentyFive Paise Thirty Only Cum

consolidating desposal of surplus stuff as directed within a

radius of 3 km.

12 50.00 Providing and supplying D. I. K-9 grade pipes for following 3898.00 Rupees Three Thousand Eight Hundred Rmt

nominal bore diameter with internal cement mortar lining NinetyEight Only

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS 8329-2000).

Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022. 200mm

13 50.00 Providing and making flanged joints to flanged DI / C.I. pipes 962.55 Rupees Nine Hundred SixtyTwo Paise Rmt

of all classes specials etc. including cost of all jointing FiftyFive Only

materials rubber packing, nut bolts, inclduing lowering laying

jointing labour hydraulic testing etc. complete.

14 15.00 Manufacture supply and delivery of cast iron detachable 601.00 Rupees Six Hundred One Only No

(short & long) complete with joint flanges duly drilled

sunthetic rubber sealing rings manufactured from styrene

butadine rubber(SBR) and other required accessories such as

nut bolts etc conforming to IS 8794-1988 or its latest revision

if any suitable for use with AC tressure pipes delivery of

joints including its accessories including loading unloading

carting stacking insurance all taxes octroi etc complete.Long

collar over size suitable to PVC/HDPE (10kg/cm2).200 mm

15 200.00 MS specials.MS specials flange ends upto 300 mm dia 98.00 Rupees NinetyEight Only Kg

16 Supplying of various materials.Supplying following materials

including all taxes and carting

200.00 3.2 Solvent cement 268.00 Rupees Two Hundred SixtyEight Only Ltr

200.00 3.3 Bolts and washers for valve 63.00 Rupees SixtyThree Only Kg

200.00 3.5 Rubber packing normal 80.00 Rupees Eighty Only Kg

200.00 3.6 Rubber packing Neoprene type 156.00 Rupees One Hundred FiftySix Only Kg

Quantities Tendered Rates Total Amount

Quantities Tendered Rates Total Amount

Estimated may be Item of Work In Figures Unit according to

more or less Rs. estimated quantity

17 200.00 Providing and fixing at site of work MS iron channels, angles, 72.00 Rupees SeventyTwo Only Kg

iron rails with Rly, fright loading unloading carting and all

taxes etc complete as directed including paints 2 coats etc

18 5.00 Stop valves/cocks. Providing & fixing gun metal check or 821.00 Rupees Eight Hundred TwentyOne Only No

non return full-way wheel valve. 50 mm

19 920.00 Refitting of inteloking paver block of thick 80 mm/60 mm on 183.82 Rupees One Hundred EightyThree Paise Sqm

50 mm thick layer of Sand ramming watering and EightyTwo Only

compcacting the layer etc, comp. After placing of conc. block

surface completeion have to be done and all the joint to be

filed with fines sand particles as per directed by Engineer in

20 1.00 Job work for DI line to DI/HDPE, PVC to PVC ,PVC to DI 11500.00 Rupees Eleven Thousand Five Hundred Each

Line connection with appropriate materials,labour etc Only

SCHEDULE - B5 (Ward 7)

SCHEDULE - B1 (Ward 1)

SCHEDULE - B2 (Ward 2)

SCHEDULE - B3 (Ward 3)

SCHEDULE - B4 (Ward 4)

SCHEDULE - B5 (Ward 7)