REPAIR AND SUNKEN FLOOR LEAKAGE SEEPAGE ROOF TREATMENT AND MISC B R WORK AT MD OTM ACCN AT MIL STN RAIWALA

Amount

Demolition of lime concrete in floors and paving exe 15 cm thick above ground floor (sunken floor) including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any othet loose material and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M&L for PCC 1:1½:3 type A-0 (Using 12.5mm stone aggregate)as in concrete angle-fillets with a radiaus of 75 to 100 mm shall be provided at junctions between roofs, floor and vertical faces of walls (parapet, pillar for water tank staging and sunken floor) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners complete all as specified and directed by Engr-in-charge

Providing and application two coat of acrylic polymer modified cementitious flexible waterproof coating on horizontal and vertical surface for sunken floor as per manufacturer direction after base preparation of cleaning, brushing and removal of flaky materials. The coatings shall be applied at intervals and as per the manufacturer’s specifications and approved by Engineer in Charge . Note : Ponding test after water proofing coating willl be done for ponding for 48 Hrs .

M&L for 15 mm thick cement in plaster CM 1:4 on floor and wall with polymer modified repair mortar mixed with SBR Latex liquid polymer as per manufacture direction .Complete all as specified and directed Note :- (SBR) Latex liquid polymer will be measured and paid separately.

M&L for providing 40 mm dia GI pipe (medium grade) spout pipe projecting at least 300 mm beyond outer face of wall or as per direction of Engr-in-chargege.

M&L for cement concrete 1:7:12 type F2(using 40 mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed. complete all as specified and directed by Engr-in-Charge.

M&L for 30 mm thick PCC Type B-0, 1:2:4, (using 12.5 mm graded stone aggregate) as in floor mixed with integral water proofing compound .Complete all as specified and directed by Engr-in-Charge. Note :- Liquid water proofing compound will be measured and paid seperately

Supply only SBR Latex liquid polymer of approved make. complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes up to 100mm dia , jointed in cement mortar and taking out of trenches if required . complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors. complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors. complete all as specified and directed by Engr-in-Charge.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified and directed by Engr-in-Charge.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engr-in-Charge.

S & F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed by Engr-in-Charge.

S & F 110 mm PVC (SWR) WC connector with lip ring. complete all as specified and directed by Engr-in-Charge.

S & F PVC (SWR) reducers of size 110 mm x75 mm complete all as Specified & directed by GE/Eng-in-Charge.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. complete all as specified and directed by Engr-in-Charge.

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engr-in-Charge.

S & F 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) P Trap complete all as specified and directed by Engr-in-Charge.

S & F 75 mm bore PVC (SWR) floor Trap, plain with grating inclding jointing with solvent cement . complete all as specified and directed by Engr-in-Charge.

S&F in repair stack clamps out of 40mmx 3 mm flat iron including bolts and nuts and securing ends of stays to walls or roof with fastner for 100 mm pipe, complete all as specified and directed

S&F in repair stack clamps out of 40mmx 3 mm flat iron including bolts and nuts and securing ends of stays to walls or roof with fastner for 75 mm pipe, complete all as specified and directed.

Demolition of existing roof treatment i.e APP membrane incl cement screed, brick tiling incl mud mortar or lime concrete and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance, scales, oil or any other loose material and removing unserviceable material, outside of A 1 defence land complete all as specified and directed. The work will be measured only after stage passing by AGE (I). Note: - (a) The work is required to be carried out at non-accessible roof for double storey. The contractor shall make arrangement of scaffolding ,safety & security of workers and arrangement for approach to roof . (b) The rates quoted shall deemed to be included for these items. all as specified and directed

Removal of existing roof treatment i.e APP membrane incl cement screed and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance, scales, oil or any other loose material and removing unserviceable material, outside of A 1 defence land complete all as specified and directed. The work will be measured only after stage passing by AGE (I). Note: - (a) The work is required to be carried out at non-accessible roof for double storey . The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof . (b) The rates quoted shall deemed to be included for these items. all as specified and directed

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed with liquid water proofing compound (mixed as per manufacturer direction ) and finishing the surface even and smooth without using extra cement as in roof padding complete as per direction of Engr-in-Charge.. Note :- 1. Liquid water proofing compound will be measured and paid separately. 2. The work is required to be carried out at non-accessible roof for double storey The contractor shall make arrangement of scaffolding,safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items

Supply only Liquid intergal water proofing compoud

M&L for one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer (slurry will be prepared as per manufacturer direction) as to be used for bonding of new concrete/ mortar to old surface. Note :- (i)The work is required to be carried out at non-accessible roof for double storey . (ii)The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof .(iii) The rates quoted shall deemed to be included for these items.

M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturer’s instructions with following course of description below :- (a) Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated. (b) Providing APP based 5 layer polymeric membrane minimum weighing 3.6 Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer (c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrance Note : 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only. 2. The work is required to be carried out at non-accessible roof slab for double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings. complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall and gutter, fixed with self tapping screws complete all as specified and directed .

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed .

S & F Rolled Mild Steel sections confirming to Fe 410 - W as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed .

S & F Mild steel work in hand rails, wind ties, as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O. complete all as specified and directed .

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.complete all as specified and directed .

M&L preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed .

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, except brick work.complete all as specified and as directed.

Taking down cement plaster in any thickness from brick or stone walls , ceiling, facia etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 on brick / concrete walls surface, ceiling ,RCC facia of roof slab & chajjas and shaft area of toilets mixed with polymer modified repair mortar (SBR Latex liquid polymer as per manufactur direction ) . Note - (SBR) Latex liquid polymer rates quoted shall deemed to be included for these items. Note :- The work is required to be carried out upto double storey . The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach up torequired height . The rates quoted shall deemed to be included for these items .

M&L Rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth without using extra cement. complete all as specified and directed by Engr-in-Charge.

M&L preparation of new or plastered or unplastered and applying two coat of distemper acrylic oil emulsion white or tinted over and incl of one coat of alkali resistance priming paint and 1mm thick wall care putty on wall surface.Complete all as specified and directed

M&L preparation of old plastered or unplastered and applying two coat of distemper acrylic emulsion white or tinted over and incl of one coat of alkali resistance priming paint and 1mm thick wall care putty on wall surface.Complete all as specified and directed complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor

M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor

Dismantaling RCC /PVC water tanks and S&F new rotational moulded polyethylene water storage tank 1000 liters capacity, double layer (ISI Marked) construction (cylindrical vertical closed top), hoisted & fixed in position including S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule complete all as specified and as directed.

Dismantaling RCC /PVC water tanks and S&F new rotational moulded polyethylene water storage tank 500 liters capacity, double layer (ISI Marked) construction (cylindrical vertical closed top), hoisted & fixed in position including S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule complete all as specified and as directed.

Disconnecting existing tanks 500 but n. exc 1000 ltrs, setting aside (or lowering if required) for repairs etc required reconnecting and re-fixing in position with all sutiable fitting. complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia . complete all as specified and directed by Engr-in-Charge.

S& F for GI tubing 20 mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed

M & L for for shifting aside of MS monkey case of any size & weight for repair / replacement of water tank, GI pipe, tank staging & refixing the same as required at site and as directed by Engr-in-Charge

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs.complete all as specified and as directed.

S&F in repair 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule and fixed.Make : ISI mark complete all as specified.

S&F bib taps 15mm bore of standard PTMT any colour ahigh pressure screwed for iron pipe and fixed in repair (Minimum weight 15mm-90gms/20mm- 125gms).. complete all as specified and directed

S&F pillar taps 15mm bore of standard PTMT any colour ahigh pressure screwed for iron pipe and fixed in repair (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed.

M&L for coloured Glazed vitrified tiles (GVT)of any design and pattern, 600x600x9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) Complete all as specified and directed

M&L for Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE .Complete all as specified and directed

M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles . Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) .Complete all as specified and directed

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement including 12 mm thick joint up to full thickness and filled with pre-formed bitiuminous fillar complete all as specified and directed.

M/s RP AGRAWAL

TARUN ENGINEERING WORKS

VASHU CONSTRUCTION Co.