REPAIR TO CEILING FANS AND EXHAUST FANS AT MIL STN RAIWALA AND NARENDRA NAGAR UNDER AGE (I) RAIWALA

Amount

Dismantling and opening of ceiling fan for overhauling any make, greasing and oiling of ball bearing and bushes respectively & reassembling the fan after servicing, greasing etc complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible twin core PVC sheathed and overall insulated cable of size 23/.0076, capacitor holding clamps, canopy, locking screw, split pin, rubber reel, nut bolts with washers PVC connection 2 way and blade screws complete all as specified and directed for the following size :- Note : (i) All new spare parts reqd for overhauling of ceiling fans shall be measured and paid separately. (ii) The ceiling fan collected from MES complaint cell store yard for repairing and after repairing deposit the fan to MES JE or MCM incharge of complaint cell

(a) 1200 mm sweep

(b) 1400 mm sweep

Rewinding of ceiling fan with existing size of super enameled copper winding wire complete including insulation materials applying varnish and drying properly at slow temperature. Reassembling the fan after proper greasing of ball bearing, polishing of bushes complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible twin core PVC sheathed and overall insulated cable of size 23/.0076, capacitor holding clamps, canopy, locking screw, split pin, rubber reel, nut bolts with washers PVC connection 2 way and blade screws complete all as specified and directed for the following size :- Note : All new spare parts reqd for overhauling of ceiling fans shall be measured and paid separately.

(a) 1200 mm sweep

(b) 1400 mm sweep

Dismantling and opening of exhaust fans for overhauling any make, greasing and oiling of ball bearing and bushes respectively & reassembling the fan after servicing, greasing etc complete including replacement of unserviceable fan capacitor 2.5/3.15 MFD, copper flexible twin core PVC sheathed and overall insulated cable of size 23/.0076, capacitor holding clamps, canopy, locking screw, split pin, rubber reel, nut bolts with washers PVC connection 2 way and blade screws complete all as specified and directed for the 250 mm sweep to 450 mm sweep fans :- Note : (i) All new spare parts reqd for overhauling of ceiling fans shall be measured and paid separately. (ii) The ceiling fan collected from MES complaint cell store yard for repairing and after repairing deposit the fan to MES JE or MCM incharge of complaint cell

Rewinding of exhaust fan with existing size of super enameled copper winding wire complete including insulation materials applying varnish and drying properly at slow temperature. Reassembling the fan after proper greasing of ball bearing, polishing of bushes complete including replacement of unserviceable fan capacitor, copper flexible twin core PVC sheathed and overall insulated cable of size 23/.0076, capacitor holding clamps, nut bolts with washers PVC connection 2 way and blade screws complete all as specified and directed for the following size :- Note : All new spare parts shall be measured and paid separately.

(a) Exhaust Fan 400/450 mm sweep

(b) Exhaust Fan 250/300 mm sweep

Supply & replacement of following spare parts required for Ceiling fan/Exhaust fan complete all as specified & directed.

(a) Copper flexible PVC sheathed and overall insulated three core cable 23/.0076 of make Plaza/ Paragon/Finolax

(b) Ball bearings 6202, 6203, 6201 or suitable size as reqd duly greased packed of Make DKF/NBC.

(c) Gun metal bushes of suitable sizes as required

(d) Capacitor 2.5 Mfd of make – Usha, Unistar

(e) Capacitor 3.15 Mfd of make – Usha, Unistar

(f) Capacitor 4 Mfd – Usha, Unistar

(g) MS Split pin off sizes

(h) Capacitor holding clamps (PVC) complete as per existing size

(j) PVC connector 2 way

(k) Plastic canopies suitable for ceiling fan of any make and sizes

(l) Rubber reel heavy duty

(m) Nuts, bolts and spring washer off sizes as ordered by the Engineer-in-charge.

(n) Fan hanging clamps complete including rubber reel, nuts, bolts and washers complete all as specified and directed.

(o) Locking screws of suitable size

(p) Blade screws of sizes as ordered by the Engineer-in-charge

(q) Bottam cover plastic for ceiling fan any make and sizes

(r) Ceiling fan stator shaft any size

(s) Blade suitable for 1200 mm size ceiling fan of any size/shape as ordered by the Engineer-in-charge

(t) Blade suitable for 1400 mm size ceiling fan of any size/shape as ordered by the Engineer-in-charge

Supply and fix stator assembly complete for 1200 mm sweep ceiling fan all as specified and directed by Engr-in-Charge.

Supply and fix stator assembly complete for 1400 mm sweep ceiling fan all as specified and directed by Engr-in-Charge.

Painting of ceiling and exhasut fans and blades any make and sizes with two coats of broken white enameled paint with spray gun of approved quality after removing all dust/grease and scrapping up old painted surface including preparation, filling of cavaties with metal putty, complete including writing MES No in 2mm width letter on fan body with black enameled paint and two circular golden circles of 2mm thickness on outer edge of bottom side complete all as specified and directed.