Construction of New Building for Gujarat Arts and Commerce College (Evening) at Gujarat College Campus, Ahmedabad.

NAME OF WORK :-

Construction of New Building for Gujarat Arts and Commerce College (Evening) at Gujarat

College Campus, Ahmedabad

BILL OF QUANTITIES

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

1 Excavation for foundation upto 1.5 m depth 12566.000 Cmt 117.08

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto All lift and lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m 8098.000 Cmt 162.38

to 3.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto All lift and lead .(B)

Dense or Hard soil

3 Filling in foundation and plinth with sand in 932.000 Cmt 460.19

layers of 20 cm. Thickness including watering

ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding 12642.000 Cmt 130.39

Rock) in trench plinth side of foundation . in

layer not excluding 20 cm in depth consolidation

each deposited layer by ramming and watering

5 Anti-Termite System: Providing and laying of 5063.000 Smt 134.33

permanent piping technology anti-termite treatment

before flooring work by installing LLDP (Low linear

density polyethylene) tube of 8 mm O.D. & 6.4 mm

I.D. with inbuilt pressure compensation chip every

30 cm interval in the tube, having working pressure

of 2 Kg/cm² and release rate of 1.9 ltr/hour fixed by

P-clips and nails. The LLDP pipe shall be installed at

the entire periphery of the building and at internal

network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout) & ends of loop pass

through a PVC elbow of minimum 32 mm ID at

junction box of wall and floor level, entering into a

steel reinforced grooved flexible pipe of minimum

mm ID leading into junction box and the loops shall

terminate in junction boxes & test every junction

during injecting chemicals for termite control

treatment. The anti-termite chemical Imidacloprid

30.5% SC - Sq.mt 133.00 mix as per IS-6313 (part

III) shall be injected by the pressure pump diluted

with water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 ltr/SMT. The contractor shall submit

approved line plan for piping system and junction

boxes dully approved by Engineer-in-Charge with

bond of 5 year warranty. (i) Anti-termite chemical

injected area (Chemical injecting incl. labour cost).

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

6 Providing and laying in position Ready Mixed M- 2899.000 Cmt 4226.95

150 grade concrete for reinforced cement

concrete work in Foundations & Plinth, using

cement content as per approved Design Mix

manufactured in fully automatic batching plant

established on site and transported to site of

work in transit mixer having continuous agitated

mixer, manufactured as per mix design of

specified grade for reinforced cement concrete

work including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures

in recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) For All

7 Providing and laying in position Ready Mixed M- 583.000 Cmt 5859.11

200 grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer

having continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying, excluding the cost of reinforcement and

including cost of centering. shuttering, formwork

finishing and admixtures in recommended

proportions as per IS : 9103 to accelerate/

retard setting of concrete, improve workability

without impairing strength and durability as per

direction of the Engineer -In - Charge. Without

Fly Ash (Min cement level as per latest IS

shall be maintained) For Plinth slab and all

R.C.C. memebers at all floor level

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

8 Providing and laying in position Ready Mixed M- 12081.820 Cmt 6552.86

250 grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer

having continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying, excluding the cost of reinforcement and

including cost of centering. shuttering, formwork

finishing and admixtures in recommended

proportions as per IS : 9103 to accelerate/

retard setting of concrete, improve workability

without impairing strength and durability as per

direction of the Engineer -In - Charge. Without

Fly Ash (Min cement level as per latest IS

shall be maintained) for all RCC elements like

Footings , Mass concrete , Column up to GL

Ground/Plinth Beam Plinth Slab, Columns,

Beam, Chhajja, Lintal, Slab, Stair, RCC Wall,

Coping etc. For All Floor

9 Add for more consumption of cement due to 157282.000 Kg 6.08

change in concreting from controlled/RMC

cement concrete of specified grade in R.C.C.

members such as column footings, columns,

beams, pardi, vertical and horizontal fins, etc.,

using design mix concrete M20/M25/M30/M35

or equivalent, including loading, unloading,

stacking, handling, labour charges, mixer

machine operation and all incidental charges

complete as directed by Engineer-in-Charge.

10 Providing IS Mark TMT FE-550D bar 1393806.200 Kg 96.66

reinforcement for RCC work including bending &

placing in position complete up to All floor Level

(Primary Producer Steel TATA, RINL, VIZAG,

11 Providing and fixing 90 cm Height Stainless 282.000 Rmt 4332.29

Steel Railing made from anticorrocive 304 grade

S S pipe of 50 mm dia (16 Gauge) as hand rail

with S S 304 grade Baluster of 40 mm dia (16

Gauge) as a vertical support fixed in RCC slab at

1.2m c/c including three horizontal S S pipes

of 25 mm dia (16 Gauge) at eqal distance fixed

by 18.75 mm dia (16 Gauge) S S pipe with

baluster including accessories as per detailed

drawing as directed etc. complete.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

12 Providing and fixing 30 cm Height Stainless 368.000 Rmt 1969.50

Steel Hand Railing made from anticorrocive

grade S S pipe of 50 mm dia (16 Gauge) as hand

rail with S S 304 grade Baluster of 40 mm dia

(16 Gauge) as a vertical support fixed in RCC

member at 1.2m c/c S S pipe with baluster

including accessories as per detailed drawing as

directed etc. complete.

13 Brick work using common burnt clay building 1410.500 Cmt 4021.02

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6. (1- Cement : 6 -fine sand) (B)

Conventional below plinth

14 Brick work using common burnt clay building 3235.000 Cmt 4344.62

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional All Floor

15 Half Brick masonry in common brunt clay 2565.000 Sq m 660.44

building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and

plinth (B) Conventional in super structure. for

16 Providing and fixing 150 mm wide, approved 3722.000 Smt 339.36

quality chicken wire mesh at junction of brick

work and RCC work or two dissimilar surfaces,

at all heights fixed by nails, rowal plugs or tag

before applying the plaster, including curing,

scaffolding all complete as directed.

17 Providing 20 mm thick double coat mala cement 29925.700 Smt 310.68

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel

including scaffolding curing and 10mm grooves

etc. complete.. ForAll Floor

18 Providing 10 mm. Thick mala cement plaster in 18185.700 Smt 194.02

single coat for plastering on ceiling and soffits of

stairs and finished with trovel in : (I) Cement

mortar 1:4 (1 cement : 4 sand) smooth mala

finish and 10mm grooves etc. complete. All

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

19 20 mm thick Sand faced cement plaster with 22332.900 Smt 367.54

1cmx1cm grooves as suggested by this office

consisting of 12 mm thick backing coat of C.M.

1:3 ( 1 cement : 3 coarse sand ) and 8 mm thick

finishing coat of C.M. 1:1 ( 1 cement : 1 coarse

sand) and 18mm wide & 8mm deep groovesfor

all heights as directed etc. complete. and as per

pattern sample aprroved by the architect or

directed engineer in-charge

20 Providing throating or plaster drip and moulding 1790.000 Rmt 41.66

to R.C.C. Chhajja.

21 Wall painting with two coats of Acrylic lapy 29010.800 Smt 119.82

(putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth,

followed by two coats of plastic emulsion paint of

approved brand and manufacture to give an

even shade, complete.

22 Painting ceiling painting with two coats of Acrylic 18217.100 Smt 125.23

lapy (putty) & two coats of primer of approved

brand and manufacture on new surface to give

an even shade including thoroughly brushing

the surface free from mortar droppings and

other foreign matter and sand papered smooth,

followed by two coats of plastic emulsion paint of

approved brand and manufacture on wall and

ceiling surfaces to give an even shade, complete.

23 Wall Painting (Two coats) with 100% weather 22217.600 Smt 124.63

proof acraylic emulsion paint of approved brand

and manufacture and of required shade on

exterior wall surface to give an even shade over

and including primery coat with Alkaly

resistance primer of approved brand after

thoroughly brushing surface to remove all dust

and remains of loose powdered material etc.

copm. for all height

24 White washing with lime on wall surface (two 477.000 Cmt 12.41

coats) to give an even shade including

thoroughly booming the surface to remove all

dirt, dust; mortar drops and other foreign

25 Forming groove of uniform size from 10 x 10 mm 17297.000 Rmt 52.32

and upto 25 x15 mm in plastered surface as per

approved pattern using wooden batten, nailed to

the under layer including removal of wooden

battens, repairs to the edges of plaster panel and

finishing the groove complete as per

specifications and direction of the engineer

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

26 Providing And filling with good quality cinder 85.000 Cmt 555.50

(steam coal) as directed by engineer in charge in

sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed,

27 Providing Water proofing Treatment on Sunk 423.000 Smt 369.46

Slab including cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer

and finished with a 1:3 (1 cement : 3 Mortar )

floating coat of neat cement average 50mm

thick to Prepare slope including water proofing

chemical etc. Complete for Sunk Slab All Floor.

28 Providing and laying broken chine mosaic 4010.100 Smt 747.29

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including rounding

off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic

acid etc. as directed

29 Providing and laying cement concrete work 1:2:4 399.600 Cmt 4133.09

(1-Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and

reinforcement for reinforced concrete work for

30 Providing Plinth Protection to Building including 683.000 Smt 2240.48

excavation in ordinary soil and laying cement

concrete 1:3:6 using stone aggregates of 40mm

nominal size in foundation layer 125 mm thick+

125mm thick sand layer below pre-cast Rubber

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pneumatic

compressed by mechanically pressed and as per

approved design including 75mm Sand layer

for levelling and filling the joint with sand in

proper line and level etc. complete, Including

Providing and fixing pre-cast concrete kerb stone

of grey cement based concrete block 30cm

length, 30cm height and 15cm thick made of

M250 grade concrete as per approved design

and including excavation for fixing in proper line

and level, filling the joint with C:M 1:3

(1cement:3 fine sand) etc. complete.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

31 Providing and fixing in position standard 107.000 Smt 4802.55

extruded Aluminium Three Track Sliding

Window System (27 mm Series Deluxe Type) .

The frame shall consist of top, bottom, and side

sections of size 91 mm × 45 mm, 1.5 mm thick,

weighing 1.591 Kg/Rmt, and the shutters shall

consist of top, bottom, and side sections of size

65 mm × 28 mm, 1.5 mm thick, weighing

Kg/Rmt, with interlock section of size 37 mm ×

31.75 mm, 1.3 mm thick, weighing

Kg/Rmt. The window shutters shall be fitted

with 5 mm thick transparent tinted float glass,

fixed with clip bead arrangement and EPDM

rubber gasket to ensure airtight and watertight

performance. All joints shall be properly sealed

with approved section sealant, and the entire

system shall include air lock strip and power-

coated standard aluminium fittings. The work

shall be completed in all respects including

materials, labour, fittings, tools, and equipment,

as per detailed drawings and as directed by the

Engineer-in-Charge.

32 Providing and fixing standared extruded of 792.200 Smt 3394.97

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent

bronze colour tinted float glass as details etc

complete for Fix Ventilation

33 Providing and fixing in position standard 1309.000 Smt 4435.70

extruded Aluminium Two Track Sliding Window

System (27 mm Series Deluxe Type) comprising

two sliding shutters only. The frame shall

consist of top, bottom, and side sections of size

54 mm × 45 mm, 1.5 mm thick, weighing

Kg/Rmt, and the shutters shall consist of top,

bottom, and side sections of size 65 mm ×

mm, 1.5 mm thick, weighing 1.020 Kg/Rmt,

with interlock section of size 37 mm ×

mm, 1.3 mm thick, weighing 0.328 Kg/Rmt. The

window shutters shall be fitted with 5 mm thick

transparent tinted float glass, fixed with clip

bead arrangement and EPDM rubber gasket to

ensure airtight and watertight performance. All

joints shall be properly sealed with approved

section sealant, and the entire system shall

include air lock strip and powder-coated

standard aluminium fittings. The work shall be

completed in all respects including materials,

labour, fittings, tools, and equipment, as per

detailed drawings and as directed by the

Engineer-in-Charge.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

34 Providing and fixing openable Aluminium 71.000 Smt 5948.50

casement window made from standard extruded

colour anodized Aluminium sections, with frame

members (bottom, top and sides) of Jindal

Section No. 20630 and openable shutters made

of single-glass shutter members (top, bottom

and sides) of Jindal Section No. 20727, including

glazing clip member Jindal Section No.

The shutters shall be fitted with 5 mm thick

transparent plain float glass, fixed with EPDM

rubber gaskets and transparent silicon sealant.

The work shall include providing and fixing S.S.

hinges, S.S. handle of 150 mm, S.S. stopper

mm long, and all necessary fittings, fixtures and

accessories, complete as per approved drawing

and as directed by the Engineer-in-Charge.

35 Providing & Fixing in position standard extruded 114.000 Smt 3960.41

approved colour anodised Aluminum Ventilation

with outer frame section 20125 Stander Box

Frame @ Wt 0.861 kg/Rmt with 5mm thick fixed

ground glass fixed to alluminium strip blade

fixed or adjestable ventilation & Providing and

fixing Nylon Mosquito net with stitching on wall

as per ventilation size, including all required

materials, fixtures, fastenning, labours and

equipments as per detailed drawing as directed.

For Ventilators

36 Providing and fixing double shutter specially 25.000 Smt 7429.56

designed hollow metal door comprising 35 x

mm M.S. rectangular hollow section frame with

25 x 25 mm M.S. pipe horizontal stiffeners

placed at equal spacing throughout the height

for rigidity and stability. Both shutters shall be

fabricated with 19 mm thick Marine Plywood,

finished with approved shade, pattern, and

design of decorative laminate on both sides, and

edge beading neatly polished. The door shall be

fitted with durable floor spring (minimum

capacity 200 kg) and 60 cm long stainless steel

handles on both sides, including all fixtures,

fasteners, holdfasts, hinges, necessary hardware

fittings, polishing, finishing, labour, and

materials, complete as per architectural drawing

and as directed by the Engineer-in-Charge.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

37 Providing and fixing 38 mm thick flush double 461.000 Smt 4467.23

door shutter, solid core type, conforming to

IS:2202 and ISI approved, mounted on an

anodized aluminium frame made from sections

of size 63.5 mm × 38 mm x2.5mm, with country

wood inserts provided inside the frame to ensure

durable hinge fixing. Each shutter shall be

finished with 1 mm thick decorative laminate on

both sides, with machine-glued PVC edge

banding on the periphery. The work shall

include providing and fixing 300 mm long

stainless steel handles on both sides, stainless

steel fixtures, approved make locking

arrangement, 4 nos. 150 mm long stainless steel

hinges per shutter, and all necessary fixtures

and fasteners. The rate shall include all

materials, fittings, labour, equipment, and

accessories, complete as per approved drawings

and directions of the Engineer-in-Charge.

38 Providing and fixing 38 mm thick flush single 207.000 Smt 4586.95

door shutter, solid core type, conforming to

IS:2202 and ISI approved, mounted on an

anodized aluminium frame made from sections

of size 63.5 mm × 38 mm x2.5mm , with country

wood inserts provided inside the frame to ensure

durable hinge fixing. The shutter shall be

finished with 1 mm thick decorative laminate on

both sides, with machine-glued PVC edge

banding on the periphery. The work shall

include providing and fixing 150 mm long

stainless steel handle, stainless steel fixtures,

approved make locking arrangement, 4 nos.

mm long stainless steel hinges, and all

necessary fixtures and fasteners. The rate shall

include all materials, fittings, labour, equipment,

and accessories, complete as per approved

drawings and directions of the Engineer-in-

39 Providing and fixing FRP frame size 100 x 50 137.000 Smt 2325.02

mm and 35 mm thick ( Fiber Glass with PUF

Injection ) FRP depress panel Single or Double

shutter having extra reinforcement on sides &

edges in Gel coat finish.The core of the both

shutter & frame is to be filed up with injected

fire retradat grade polyurethene foam done in

situ along with embeded wooden pieces for

stiffening & also taking hinges & fintures.The

whole FRP frame & single or double shutter is to

be waterproof, weatherproof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws &

S.S fixtures & fastenings & fartener

sleeve.Colour and Shade approved by Engineer-

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

40 Providing and placing 0.6m x0.6m Double 203.000 Smt 1425.11

Charged Vitrified Tile vitrified 8 mm thick tile

flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive

material with 3mm groove including material,

labour cost etc; including dismentaling of

existing flooring and jointed with color cement

slurry including finished with flush pointing &

cleaning the surface etc. complete in Two colour

pattern or as per directed engineer

incharge.(tack 10% DARK shade)

41 Providing and placing 0.6m x0.6m Double 10.000 Smt 1302.90

Charged Vitrified 8 mm thick tile skirting over

12 mm (average) base of cement mortar 1:3 (

cement: 3 coarse sand) on new surface or fixing

on existing flooring by adhesive material with

3mm groove including material, labour cost etc;

including dismentaling of existing flooring and

jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.

complete in Two colour pattern or as per

directed engineer incharge.(tack 10% DARK

42 Providing and placing 600 mm × 600 mm Full 223.000 Smt 1510.96

Body Vitrified Tiles, 8mm to 10mm thick, Salt &

Pepper finish, flooring over 20 mm (average)

thick cement mortar 1:6 (1 cement : 6 coarse

sand) on new surface or fixing on existing

flooring using approved tile adhesive, including

dismantling of existing flooring wherever

required, laying in proper line, level and pattern,

joints filled with matching coloured cement

slurry, finishing with flush pointing, complete

cleaning of surface, etc. complete, laid in two-

colour pattern with 10% tiles in dark shade or as

directed by Engineer-in-Charge.

43 Providing and placing 600 mm × 600 mm / 300 1445.000 Smt 1607.92

mm high Full Body Vitrified Tiles, 8 mm thick,

Salt & Pepper finish, for skirting, fixed using

approved tile adhesive over prepared cement

mortar base, including 12 mm (average) thick

cement mortar 1:3 (1 cement : 3 coarse sand) on

new surface or fixing on existing surface with

3mm groove including material, labour cost etc;

including dismantling of existing

skirting/flooring wherever required, cutting tiles

to required height, fixing true to line, level and

plumb, providing 3 mm wide groove filled with

approved epoxy grout at joints, joints finished

neatly, complete cleaning of surface, etc.

complete, laid in two-colour pattern with 10%

tiles in dark shade or as directed by Engineer-in-

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

44 Providing and laying Machine cut Mirror 11965.700 Smt 992.66

polished Kota stone(60cmx45cm /60cmx60cm)

slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed

with pigment to match the shade of slab

including rubbing and polishing etc. complete.

45 Providing and laying Machine cut Mirror 550.000 Smt 1187.79

polished Kota stone(60cmx45cm /60cmx60cm)

slab 25mm thick in risers of steps,skirting Dedo

and pillars laid on 10mm thick cement mortar

1:3 (1-Cement : 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match

the shade of slab including rubbing and

polishing etc. complete.

46 Providing and laying antiskid ceramic tiles 30 x 297.100 Smt 970.07

30 cm size 6 mm thick in flooring treads of steps

and landing laid on a bed of 12 mm thick

cement mortar 1:3(1-cement:3-coarse

sand)finishing with flush pointing in white

47 Providing and laying glazed tiles tiles size 30 x 424.000 Smt 1441.22

60 cm 8 mm thick in skirting risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour

cement slurry etc completed.

48 Providing and laying machine cut free edge 1009.596 Smt 2541.16

machine polished granite stone 15mm - 18mm

thick finished treads in length with 1cm

projecting nozing rounded moulding in tread laid

over 20 mm (av.) thick of CM 1:6 on treads

jointed with grey or colour cement slurry

including rubbing and polishing incl. making

Three No.s of grooves of size 3mm X 3mm along

the length of treads etc. complete

49 Providing and laying machine cut free edge 257.000 Smt 2211.90

machine polished granite stone 15mm - 18mm

thick finished risers and skirting in length in

12mm thick CM 1:3 on risers jointed with grey

or colour cement slurry including rubbing and

polishing etc. complete

50 Providing and fixing frosted finished 600mm x 29.000 Smt 6008.49

1200mm glass urinal partition with crystalline

Dhar polish on exposed edges, supported by SS

legs and fitting bracket clamp with cut holes and

silicon grouting, including all accessories and

labor charges directed by the engineering in

charge, etc. complete

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

51 Providing and fixing mirror polished 16mm to 3245.900 Smt 3216.85

18 mm thick Balck Granite stone with full round

edge and mirror polish of approved quality,

shade and colour as approved by Engineer-in-

Charge, in cladding on sill and around the lift

door, fixed with 12 mm thick cement mortar CM

(1:3) and cement slurry & approved adhesive,

including moulding and polishing of all exposed

edges, complete as directed by the Engineer-in-

52 Providing and laying water proofing treatment by 288.000 Smt 942.25

conventional method including cleaning the slab

surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm

thickness mixed with water proofing compound

at rate prescribed by manufacturer, including

putting of brick bats of average thickness 40 mm

Well immerssed in water laid uniformly on first

layer of mortar including applying cement slurry

@ rate of 0.08 bag/Smt. on fixed layer of brick

bats including maintaining necessary slope, in

second layer 40 mm thick C.M 1:4 mixed with

water proofing compound as directed, including

finishing smooth with cement slurry as directed

53 Providing and fixing M.S Safty Grills having 49276.000 Kg 108.07

16mm Solid MS Squre bar Horizontally at every

equal 0.10m C/C distance and 2 no of bar

Vertically at every equal 0.375m C/C distance

Fixing on around (6x30) mm Solid MS Patti

including cutting, welding and fabrication etc;

including one coat of primer of approved quality

and two coats of oil painting as per detail

drawing etc. complete as per directed Engineer

54 Providing erecting and fixing Triple layer PVC. 75000.000 Litre 9.09

(ISI) water tank confirm to IS 12701of required

capacity each with all necessary fittings and

connection etc. complete on terrace.

55 Providing laying and jointing in true line and 700.000 Rmt 195.64

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

56 Providing laying and jointing in true line and 480.000 Rmt 148.12

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

57 Providing laying and jointing in true line and 1560.000 Rmt 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

58 Providing laying and jointing in true line and 1360.000 Rmt 81.31

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

59 Providing, laying and jointing in true line and 310.000 Rmt 831.22

level 160 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of

the size 160 mm diametre x 210 mm length x

196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends,

shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement

including cost of all materials.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

60 Providing, laying and jointing in true line and 900.000 Rmt 835.15

level 110 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends,

shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement

including cost of all materials.

61 Providing, laying and jointing in true line and 340.000 Rmt 283.81

level 75 mm dia. UPVC SWRType B pipe

conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and

fitting conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp

at every 2000 mm c/c or shall be conceled in

walss as directed including necessary fittings

such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

62 Providing laying and jointing in true line and 640.000 Rmt 1369.56

level 100 mm dia. U.P.V.C. Pipe ( SCH- 80) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials

63 Providing laying and jointing in true line and 560.000 Rmt 935.26

level 80 mm dia. U.P.V.C. Pipe ( SCH- 80) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

64 Providing laying and jointing in true line and 400.000 Rmt 808.00

level 65 mm dia. U.P.V.C. Pipe ( SCH- 80) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials

65 Providing and fixing in PVC SWR cowel went 20.000 No 16.16

75mm dia to pipes.(B) 75mm dia.

66 Providing and fixing in PVC SWR cowel went 21.000 No 29.29

110mm dia to pipes.(B) 110mm dia.

67 Providing and fixing PVC SWR Nahni trap IS 126.000 No 571.08

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good

68 Providing and fixing white/colour wash down 41.000 No 15251.00

Wall Hung EWC of approved make CERA /

Jaquar / equivalent premium quality, complete

with seat cover, having integral ‘P’ or ‘S’ trap,

including jointing the trap with PVC/CI soil pipe

in cement mortar 1:1, including all necessary

fittings. The item shall also include PVC combi

dual flush low-level flushing cistern of 10.0 litres

capacity with all accessories, Metropole Flush

Valve (Dual Flow) 40 mm size, and Hand Shower

(Health Faucet) with 8 mm dia, 1.20 m long

flexible tube and wall hook, complete in all

respects. Rate shall include all materials, labour,

fixing, testing, and making good the

surroundings. The brand shall be strictly as per

given specification or equivalent, or as directed

by the Engineer-in-Charge.

69 Providing and fixing stainless steel grab 16.000 Set 16427.65

bars/hand rails of approved make CERA /

Jaquar or equivalent, heavy-duty quality,

satin/matt finish, suitable for accessible toilets,

including all necessary wall mounting brackets,

screws, rawl plugs, anchors and fixing

accessories, complete as directed. The item shall

include (a) straight grab bar of 350 mm length,

(b) L-shaped grab bar with approximate overall

size 600 mm × 600 mm, and (c) U-shaped grab

rail with hinge of approximate length 700 mm,

fixed securely on wall/floor as required,

complete in all respects as per manufacturer’s

specifications and as directed by Engineer-in-

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

70 Providing and fixing ball cock of approved. 15.000 No 189.84

quality as directed.(A) Copper Metal (ii) 50mm

71 Providing and fixing flat back wash basin full set 17.000 No 11887.70

with half pedestal, height 405 mm, CERA brand

or equivalent, wall-mounted, size 460 × 345 ×

155 mm, snow white, including C.I. or M.S.

brackets, cutting holes, and making good the

surface. Complete with CERA or equivalent

waste coupling full thread, C.P. brass extension

nipple 62 mm long, S.S. flange, 60 cm long

water supply connection pipe, and full thread

waste coupling. Also providing and fixing Angle

Stop Cock, 15 mm dia with C.P. brass extension

nipple 62 mm long, and Pillar Cock, 15 mm dia

with C.P. brass extension nipple 62 mm long,

including all necessary fittings, jointing, and

making good. All work to be CERA / JAQUAR or

equivalent, or as per directed Engineer-in-

72 Providing and fixing 600mm x 450mm bevelled 18.000 No 833.73

edge mirrror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and

73 Providing and fixing 1.5 m × 0.9m bevelled edge 16.000 No 4165.49

mirror of superior quality glass, mounted on

mm thick A.C. sheet or plywood, and securely

fixed to wooden plugs with C.P. brass screws

and washers, complete with all necessary

fittings, fixtures, labour, and making good the

74 Providing and fixing Towel Ring Round with 26.000 No 1103.93

Round Flange jaquar including necessary S.S.

screw and labour etc. complete. The BRAND

should be as per given specification or

Equivalent or as per directed engineer incharge

75 Providing and fixing Bib cock long nose with wall 154.000 No 3136.05

flange and aerator CERA or Equivelent on wall

with all Laboure, fittings and accassary charges

etc. completed,The BRAND should be as per

given specification or Equivalent or as per

directed engineer incharge

76 Providing and fixing Angle stop cock JAQUAR or 34.000 No 1277.65

equivelent with 15 mm dia with C.P. brass

extension nipple 62 mm long etc. complete.The

BRAND should be as per given specification or

Equivalent or as per directed engineer incharge

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

77 Providing and fixing urinal, flat back, size 420 × 26.000 No 9477.84

395 × 635 mm, CERA brand or equivalent,

including connection with trap, waste coupling

full thread, and integral longitudinal flush pipe.

Complete with CERA auto-closing concealed

urinal flush valve, brass, C.P. brass extension

nipples, necessary brackets, wall supports, and

all other required fittings, jointing, and making

good the surface. All work to be CERA /

equivalent, or as directed by the Engineer-in-

78 Providing and fixing Shop dish of approved 34.000 No 580.75

quality including cost of all accessories such as

bolts, nuts required for above fittings and labor

charges etc. completed as per directed engineer

79 Providing laying and jointing in true line and 590.000 Rmt 1127.16

level 200mm dia. Form core Pipe for drainage

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on existing structure,

Wall or ground with the help of clamp or shall be

canceled as directed including necessary fittings,

etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

80 Providing and fixing S.W. gully trap with C.I. 20.000 No 1246.92

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth

traps (B) 150mm x 100mm size P or R type

81 Constructing brick masonry chamber for 60.000 No 3975.36

underground C.I. Inspection C.I. Inspection

chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in

C.M. 1:5 precast RCC cover 500mmx 700mm

intenal dimensions with frame (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete (i) Inside dimensions

500mmx 700mm and 450mm deep for single

82 Extra over items for every additional depth of 60.000 No 264.86

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(i) for 500mm x 700mm

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

83 Providing and fixing MS Ladder of required 2300.000 Kg 92.92

pattern with MS flats(30x3mm) or round or

square bars (12mm) at required spacing & with

round headed bolts and nuts or screws or

welding including primer coat of approved

quality and two coats of oil paintas as directed

by engineer in charge

84 Providing and fixing in position collapsible steel 121.000 Smt 5445.14

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x

mm with 38mm dia, steel pulleys complete with

bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red

85 Constructing Kitchen Platform of 18 mm thick 9.000 Smt 6183.22

Polished Black Granite at top and 25 mm thick

Kota stone slab one side polished at bottom

with cementing Materials / adhsives including

makeing necessary grooves in walls with

Vertical sandwich two Kotastone 25 mm

support every 60 cm centre to centre or as

required including all labour material of

approved quality incl. full moulded round front

edge granite strip of one side polished and

jointed with grey cement slurry including

rubbing and polishing etc. complete for all

86 Providing and fixing 25 mm thick polished kota 30.000 Smt 667.61

stone Shalve with full round edge and double

side polished of any required and fixing with

cement slurry & adhesive including both

exposed edges cut and Smooth Finished as

directed by engineering in charge etc. complete.

87 Providing and fixing Kitchen sink with C.I. or 4.000 No. 5355.02

M.S. brackets, painted white including cutting

holes in walls and making good the same but

excluding fittings. (C) Vitreous China Sink.(i)

600mm x 450mm x 150mm size including pillar

cock 15mm, M.I fisher union 32mm, C.P Brass

waste 32mm , Angle cock 15mm including all

laboure and material charges etc. completed.

88 Providing and fixing Kitchen platform trolley 5.000 Smt 14411.69

having three drawers of SS (IS 304) of required

size like thali, katleri, perforated, partition,

cupsosar type in kitchen platform having drawer

front side and backside by using 19mm thick all

proof plywood of ISI quality all side laminated

etc. as directed. The size of SS (IS 304) basket of

size 4" to 18" for thali, dish, katleri, perforated,

partition, cupsosar type as directed including

necessary S.S. fittings, handles, nobs, telescopic

channels, etc. as directed

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

89 Providing & Fixing Counter Wash Basin into 21.000 Smt 14178.48

platform of 600 mm wide using Top 18 mm

thick granite of approved shade and sample and

bottom 25 mm thick single side Polished kota

stone with 25 mm thick screed of cement mortar

1:3 With granite Facia Patti . The stone shall be

fixed by chassing in to the wall surface and

supported vertically with 18mm thick

granitestone support including Wash Basin

x 425 x 180 mm waste brass coupling, stainless

steel extension nipple, flexible PVC outlay pipe,

Casted Swinging Spout etc complete as

suggested by Architect/Engineer-in-charge. The

BRAND should be as per given specification or

Equivalent or as per directed engineer incharge

90 Providing and fixing 25 mm thick, 50 mm wide 71.000 Smt 7787.10

Staineless steel letters of any size (Minimum

mm) on 3 mm thick exterior composite panel of

any size with all material, hardware, acessories

& fittings etc completed.

91 Design, supply & installation of Name/Number 72.000 Smt 9597.02

Plate including lettering made of polyvinayl of

approved color on 1 mm thick stainless steel

(S.S 316 ) sheet as approved by Architect or

Engineer-in-charge. For all floor

92 Providing and fixing G.I. louvered elevation duct 150.000 Smt 2308.86

as per approved drawing and reference image,

using G.I. sheet 0.55mm thick louvers of

m width formed from approved gauge G.I. sheet,

fixed to a 55mm microne powder-coated G.I.

channel frame of weight 3.06 kg per metre on

both vertical sides, including necessary opening

mechanism, stiffeners, brackets, fasteners,

sealing, scaffolding, and all materials and labour

required to complete the work in proper line,

level, and alignment as per site instructions,

measured in square metres of finished elevation

93 Providing and fixing MS Z clamp on Wall or 1195.000 No 85.85

celling for Pipe Fitting including all type

necessary fittings and accessory etc. completed

as per directed engineer in charge.

94 Charges for making holes from 50mm to 160mm 27.000 Rmt 2255.33

dia in RCC wall, slabs, or any other RCC

members or brickwork by diamond core cutting

machine of HILTI or equivalent, including filling

with approved chemical grouting, finishing the

surface, disposing of debris from all floors,

complete in all respects as directed.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

95 Providing and fixing coloured self adhesive PU- 120.000 Smt 4618.73

Tactile tile, ground surface indicators of

Polyurethane) of size 300mm x 300mm for

guiding/warning to the visually visitors in the

centre/side of the pedestrian/approach pathway

as per specification and guidelines complete in

all respect to the entire satisfaction of in charge.

96 Providing and fixing acrylic multilingual Braille 160.000 No 1707.91

(raised dots) DIRECTIONAL SIGNBOARDS of size

225 x 150mm designed as per accessibility

standards and having 3.5mm thick acrylic base

plate with Upper Case San Serif words made of

white acrylic non glare cut out letters of height

15mm raised not less than 0.8mm above base

plate and the equivalent word written in Hindi

with Devanagari non glare acrylic letters of

height 15mm raised not less than 0.8mm above

base plate and having a non-glare acrylic cut

arrow pointing in the required direction. Each

signboard to be fixed as per manufacturers

specifications on the wall at the approved

location and at a height of 1200mm from FFL

complete as per design / specifications and

guidelines as per the entire satisfaction of the

Engineer-in-charge

97 Providing & fixing Braile indicator of size 170 160.000 Rmt 842.34

mm x 35mm for handrails of the approved

design and make have braile dots raised 0.5 mm

above base plate to be installed at specific

locations as per direction of engineer in charge

98 Providing and Fixing 15 mm thick 300 mm x 30.000 Smt 1247.35

300 mm Tactile Warning Tiles (Attention Tiles

i.e. Tactile Warning Surface Indicator {TWSI}) of

Johnsan Endura Tac Button Yellow Plus or

equvqlent make in flooring laid on 20 mm thick

cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointed with cement slurry

including finished with flush pointing & cleaning

the surface for all floors as per detailed drawing

etc. complete as directed by Architect or

Engineer in charge. Thse tiles shall be Anti Skid,

Chemical Resistant, Fade Proof, Frost - Heat &

Weather Proof, High Flexural Strength, Highly

Durable, Stain Resistance . All Tactile Warning

Tiles meet the specific size and dimension

standards as required by ISO/FDIS

99 Providing and laying and fixing 50 mm thick 416.000 Smt 1491.03

expansion joint by hydro cell semi rigid UV

resistance with high performance laminated

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

100 Applying and providing Expansion joint sealing 85.000 Rmt 4772.00

System on 100 mm vide joint including cleaning

of exansion joint by mechanical means provision

of adhesive and flexible membrane with required

bond length as per menufracturer specification

and 4mm thick alluminium strip covering with

one side sloted and bolted with suitable system,

inclusive of all manpower, machinery and

material as per specification and as directed.

101 Providing and filling the expansion joint by 773.000 Rmt 515.39

Thioflex 600 polymer or equivalent confirm to BS

4254-1983 as per required shade and

manufactured specifi-cation by making groove of

50 mm x 12.5 mm lather by cutting or by

repairing groove and removing mortar drop or

any other foreign materials including applying

primer and filling required size (oversize of joint

PU foam etc. complete.

102 Providing and fixing 25 cm Wide & 3mm thick 773.000 Rmt 1054.34

exterior composite panel on existing expansion

joint horizontally & vertically with all material,

hardware, acessories & fittings etc completed.

103 12mm/16mm Rebar, excluding bar. It should 280.000 Nos 295.93

minimum 160mm embedded in concrete, drill

dia. Should be minimum 16mm/20mm for

rebar, material should be used Will Fischer FISV

360 or equievalent. (Pull out strength check

should be given by contractor as per technical

104 10mm Rebar, excluding bar. It should minimum 280.000 Nos 207.05

120mm embedded in concrete, drill dia. Should

be minimum 12mm for rebar, material should

be used Will Fischer FISV 360 or equievalent.

(Pull out strength check should be given by

contractor as per technical specification)

105 Providing, fabricating, and fixing Glass 22.000 Smt 7034.65

Reinforced Concrete (GRC) Railing of approved

design, pattern, and profile, factory-cast using

M25 grade cement concrete with alkali-resistant

(AR) glass fibre (minimum 5% by weight of

cement), fine aggregates, polymer additives, and

admixtures, in minimum 30 mm thickness (or

as specified), with smooth moulded finish free

from defects or deformities, fixed in position

using stainless steel (SS) brackets, clamps, or

mechanical anchors with non-shrink grout or

polymer-modified cementitious adhesive as per

manufacturer’s specification, including design

approval, moulding, de-moulding, curing,

transportation, handling, scaffolding,

installation, alignment, joint filling, cleaning,

and finishing, complete in all respects as per

drawings and direction of Engineer-in-Charge.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

106 Providing, fabricating, and fixing Glass 322.000 Smt 7901.23

Reinforced Concrete (GRC) Cornice / Patta and

Cladding of approved design, profile, and

pattern, factory-cast using M25 grade cement

concrete with alkali-resistant (AR) glass fibre

(minimum 5% by weight of cement), fine

aggregates, polymer additives, and admixtures,

in minimum 30 mm thickness (or as specified),

with smooth moulded finish free from cracks, air

pockets, or deformities, fixed in position using

stainless steel (SS) brackets, clamps, or

mechanical anchors with non-shrink grout or

polymer-modified cementitious adhesive as per

manufacturer’s specification, including design

approval, mould preparation, moulding, de-

moulding, curing, edge treatment,

transportation, handling, scaffolding,

installation, alignment, joint filling, cleaning,

and finishing, complete in all respects as per

drawings and direction of Engineer-in-Charge.

107 Providing and fixing decorative round teakwood 5.000 No 55744.93

finial and fascia pillar at rooftop of size 0.30 m

diameter and 3.70 m height, made from

seasoned first-class teakwood, machine finished

with smooth surface, carved to required profile

and design, polished with exterior-grade

protective coating, and securely fixed in position

with stainless steel holdfasts, anchor bolts, and

base plates, including scaffolding, handling,

transportation, erection, and finishing complete

in all respects as per drawing and direction of

the Engineer-in-Charge.

108 Providing and applying plaster embossed patta 3240.000 Smt 371.68

on building elevation in cement mortar 1:3 (1

cement : 3 fine sand), 150 mm thick, formed to

required profile, shape, and size as per

architectural drawings, finished smooth and

true to line and level with moulded / embossed

decorative pattern, curing, scaffolding, cutting,

finishing of edges, and all labour, materials,

tools, and tackles, complete in all respects and

at all heights, as directed by the Engineer-in-

109 Extra for additional height of propping and 14760.000 Smt 390.34

centering where the height of propping and

centering exceeds 4 .O M between supporting

floor to ceiling including temporary brick or

stone pillars for supporting as required. (iii)

Height more than 4.0 M. and upto 5.0 M

110 Providing and applying two or more coats of 3240.000 Smt 267.65

synthetic enamel paint of approved brand and

shade on new plastered/concrete/wood/steel

surfaces, over one coat of appropriate primer,

including surface preparation, putty/stopping,

scaffolding, curing and finishing complete, all

heights, as directed by Engineer-in-Charge.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

111 Providing and fixing wooden carving patta at 20.000 Smt 38420.40

sloping roof, made from teakwood of approved

quality, carved with decorative pattern as per

architectural design, minimum section 0.30m

width x 0.030m thick or as specified, fixed in

position with stainless steel screws, holdfasts,

nails, and adhesive as required, including

cutting, shaping, finishing with smooth surface,

polishing/painting with exterior grade protective

coating, scaffolding, handling, transportation,

and erection complete in all respects as per

drawing and direction of Engineer-in-charge.

112 Providing and applying black japan treatment of 1450.000 Smt 86.39

approved make and quality in two coats with

uniform finish and complete coverage, over

prepared surface free from dust, grease, or loose

particles. Surface shall be cleaned thoroughly

before application. The treatment shall be

applied with brushes only as per manufacturer's

specifications and allowed to dry between coats.

113 Providing and fixing hollow metal door with 220.000 Smt 4974.16

frame made from galvanized iron (GI) sheets,

ensuring stability and integrity. The door leaf

shall be 30 to 35mm thick, double skin,

fabricated from 1.2mm thick GI sheet with

honeycomb infill, and finished with powder

coating in approved shade. The frame shall be

100x50mm single rebate profile made from

1.5mm thick GI sheet with inbuilt groove,

powder coated to match. Door shall be fitted

with stainless steel hinges (4 nos. per shutter),

aluminum handles, and door magnets to retain

the door in closed position. The door should

open up to 170 degrees for ease of access. All

components shall be factory prepped, field

assembled, and installed complete with all

necessary hardware, accessories, and fixings as

per manufacturer’s specifications.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

114 Providing and fixing eco-friendly light weight calcium 1632.630 Smt 1648.96

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation. The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/

Spintone/ Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced

at joints to get required length and size of 24 X 38mm

made from 0.30 mm thick (minimum) sheet, 1200mm

centre to centre, and cross ‘T’ of size 24 X 28mm made

out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main 'T' at 600mm centre to centre to

form agrid of 1200x600mm and size 24x48mm made of

0.30mm thick (Minimum) sheet to be interlocked at

middle of the 1200x600mm panel to form grid of size

600x600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size

(24x24x3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick densified edges light

weight calcium silicate ceiling tiles of approved texture

(Fine fissured/Cosmos/Spintone) in the grid including

cutting/making opening for services like diffusers,

grills, light fittings, fixtures, smoke dtectors etc.,

wheneveer required, Main 'T' runners to be suspended

from ceiling using G.I. slotted cleats of size

25x35x1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasterners, 4mm G.I. adjustable rods

with galvanized steel evel clips of size 85x30x0.8mm,

spaced at 1200mm center to centre long main 'T'

bottom exposed with 24mm of all T-sections and also

provide additional frame work and suspended G.I.

support as required height shall be pre-painted with

polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineer-in-

charge. Note:- Only calcium silicate false ceiling area

will be measured from wall to wall. No deducation shall

be made for exposed frames/opening (cut outs) having

area less than 0.30sqm. The calcium silicate ceiling

tiles shall fissured/Spintone/Cosmos and 0.75 NRC for

Globe, light reflection 85% non-combustible as per B.S.

476 part IV, 100% humidity resistance and also having

thermal conductivity. 0.043 w/m KC for the best

thermal Insulation.

115 Excavation for foundation for depth from 3.0 m 366.000 Smt 174.23

to 5.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto All lift and lead.(B)

Dense or Hard soil

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

116 Providing and fixing C.I. Manhole cover 0.60 M. 4.000 No 958.17

x 0.45M. size having weight not less than 35Kg.

117 Providing and fixing rolling shutters of approved 9.600 Sqm 3503.41

make made of 80 mm wide M.S laths inter-

locked together through heir entire length and

jointed together at the ends by end locks

mounted on specially designed pipe shaft with

bracket plates,guide channels and arrangement

for inside and outside locking with push-pull

operation including the cost of hood cover and

sprig etc.complete(A) Shutters having width

118 Drilling pilot borehole of size 250/300 mm at 500.000 Rmt 573.68

above site by mud flush direct rotery rig.

119 Reaming of 250/300 mm dia.Pilot borehole to 500.000 Rmt 349.46

size 550 mm dia. Incliding assembling ,lowering

housing ,casing strainerpipers with gravel

packing and clayball packing etc.

120 Development of cach water bearingzone coming 2.000 Job 27191.22

across the full depth of tubewell by lowering

mm dia.Droplineand 32 mm dia airline for each

water bearing Zone with suitabale capacity air

compressar up to avilability of sand free

121 900 CFM /200 PSI capacity air compressar upto 2.000 Job 27603.30

the availability of sand free discharge for upto

122 Supply of M.S. E.R.W. plain end medium duty 500.000 Rmt 3605.70

pipe confirming to IS 4270/2001 with latest

amendments Of size 250 mm dia (minmum

thicknes of 7.1 mm)

123 Screen Slotting of MS ERW balnce pipe with size 978332.000 slots 0.24

of slot 6.75 cm X 6.35 cm X 3.12 mm for

124 Supply of miscellenious bore material suitable to 2.000 Pair 2037.91

250 mm dia pipes as following (A) MS Bore

clamps made from M.S. plate with 3 holes on

either side with nuts & bolts of std make of size

900X100X16 mm flat suitable for 250 mm dia

125 Supply of miscellenious bore material suitable to 2.000 No 1161.62

250 mm dia pipes as following (B) MS Bore Plug

having 100mm height made from M.S. plate with

3 holes at equal distance on cirCmtferrence for

nut-bolts type, locking arrrangement with nuts-

bolts & lock nuts of std make complete from

mm thick M.S. plate suitable for 250mm dia

126 Supply of miscellenious bore material suitable to 2.000 No 1065.02

250 mm dia pipes as following (C) MS Bail Plug

having length 0.45 mtr from medium class pipe

as per I.S. suitable for 250 mm dia pipe.

127 Supply of miscellenious bore material suitable to 250.000 NO 91.71

250 mm dia pipes as following (D) Steel bent

plate suitable for ERW pipe for 250mm dia

(size:200 X 150X6 mm)

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

128 Supply of GRAVEL OF selected size 4 mm to 80.000 Cmt 2049.29

129 Electrologging of Pilot bore hole with carting. 2.000 Job 18180.00

130 Geohydrological ground water investigation 2.000 No 14428.86

including vehicle charges for three phase DTH

bore/DR tube well including water sample

testing & chemical analysis

131 Providing, supplying and commissioning ISI 2.000 No 5401.48

mark CI D/F Reflux Valves of following class and

diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to

departmental stores stacking etc. complete.

Reflux valves PN 1 IS 5312 with ISI mark size:

132 Manufacture, supply and delivery of following ISI 500.000 Rmt 152.51

marked HDPE pipes (IS:4984/1985 with latest

amendment) having material Grade PE-80 in

approximate 100 meter coil length or as per

GWSSB requirement with SS 316 nipple at both

ends having 11 TPI threads as per specifications,

press fitted and bolted having nominal diameter

as under as per detailed technical specifications.

133 Constructing manhole with R.C.C top slab in 20.000 No. 12970.07

1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) foundation

concrte 1:3:6 mix (1 cement : 3 coarse sand :

brick bats 40 to 50 mm nominal size) inside

plastering 15 mm thick with cement mortar 1:5

(1 cement : 5 coarse sand) finished with a

floating coat of neat cement slurry and making

channels in cement concrte 1:2:4 mix ( 1 cement

: 2 coarse sand : 4 stone aggregate 20 mm

nominal size) finished smooth complete

including curing & testing (I) Inside size 900 mm

x 1200 mm and 1.50 meter deep including FRC

cover with frame size 560 mm diameter (A) with

230 mm thick walls of brick masonry using

bricks having crushing strength not less than

Kg / Sqcm in cement mortar 1:5 (1 cement :

coarse sand) (1) A-type depth 0.90 meter for

mm diameter sewer.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

134 Constructing manhole with R.C.C top slab in 20.000 No. 21270.56

1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) foundation

concrte 1:3:6 mix (1 cement : 3 coarse sand :

brick bats 40 to 50 mm nominal size) inside

plastering 15 mm thick with cement mortar 1:5

(1 cement : 5 coarse sand) finished with a

floating coat of neat cement slurry and making

channels in cement concrte 1:2:4 mix ( 1 cement

: 2 coarse sand : 4 stone aggregate 20 mm

nominal size) finished smooth complete

including curing & testing (I) Inside size 900 mm

x 1200 mm and 1.50 meter deep including FRC

cover with frame size 560 mm diameter (A) with

230 mm thick walls of brick masonry using

bricks having crushing strength not less than

Kg / Sqcm in cement mortar 1:5 (1 cement :

coarse sand) (2) B-type depth 1.50 meter for

mm diameter sewer.

135 Constructing manhole with R.C.C top slab in 20.000 No. 21270.56

1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) foundation

concrte 1:3:6 mix (1 cement : 3 coarse sand :

brick bats 40 to 50 mm nominal size) inside

plastering 15 mm thick with cement mortar 1:5

(1 cement : 5 coarse sand) finished with a

floating coat of neat cement slurry and making

channels in cement concrte 1:2:4 mix ( 1 cement

: 2 coarse sand : 4 stone aggregate 20 mm

nominal size) finished smooth complete

including curing & testing (I) Inside size 900 mm

x 1200 mm and 1.50 meter deep including FRC

cover with frame size 560 mm diameter (A) with

230 mm thick walls of brick masonry using

bricks having crushing strength not less than

Kg / Sqcm in cement mortar 1:5 (1 cement :

coarse sand) (3) C-type depth 2.25 meter for

mm diameter sewer.

136 Extra rate for constructing B.B masonry for 20.000 No. 522.96

every additional depth 0.10 meter or part thereof

over item 24.27 (I) for depth from 0.90 meter to

137 Extra rate for constructing B.B masonry for 20.000 No. 397.10

every additional depth 0.10 meter or part thereof

over item 24.27 (II) for depth from 1.50 meter to

138 Extra rate for constructing B.B masonry for 20.000 No. 550.42

every additional depth 0.10 meter or part thereof

over item 24.27 (III) for depth from 2.25 meter to

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

139 Providing laying (to level or slopes) and jointing 1245.000 Rmt. 665.48

reinforced concrete Light duty non-pressure

pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for

collar joints including testing of joints

complete.(D) 300mm

140 Providing and fixing and floor 10.0 Kg. F/Cm2 520.000 Rmt 336.24

working pressure poluthene pipes of the

following outside Dia. Low densidy, complete

with special falnge compression type fittings,

wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm

141 Providing and fixing and floor 10.0 Kg. F/Cm2 110.000 Rmt 696.90

working pressure poluthene pipes of the

following outside Dia. Low densidy, complete

with special falnge compression type fittings,

wall clipsetc. including making good the wall

ceiling and floor.(G)180 mm

142 Providing junction for rain water juncton 66.000 No 9357.65

chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick

c.c.1:2:4 bed concrete including brick masonary

wall in CM 1:6 of 0.75m height & 0.23m thick

with 15mm thick cement plaster inside &

outside & 1.06x1.06 RCC (1:2:4) slab of

thickness 0.15m with CRS steel and

0.60mx0.45m cast iron manhole cover with

frame weight not less than 35 kg as per directed

by Engineer-in-charge

143 Providing and laying precast RCC 50mm thick 20.000 Cmt 10918.10

cement concrete1:2:4 (1 cement : 2 coarse sand :

4 crushed stone aggregates 20 mm. nominal

size) cover of chamber including finishing with a

floating coat of neat cement slurry including cost

of TMT bar and cost of from work curing etc

144 Supplying and laying of screened rounded gravel 553.000 Cmt 951.42

of 25 to 90 mm, 20 to 50 mm and 5 to 20 mm

size filling in layers or packing around stainer

pipe etc.complete.

145 Drilling of min. 250 mm dia. bore hole in all 200.000 Rmt 1138.27

strata including dualover burden strata by

combination DR/DTH rig including lowering

mm dia MS ERW pipes in bore hole and testing

etc.all work as per directed engineer incharge.

146 Providing and lowering jointing 6kg/cm2 PVC 200.000 Rmt 2190.69

strainer pipe 250 mm diameter HDP first class

confirming with IS : 4935 including cost of outer

camp solution etc.complete.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

147 Construction of granular sub-base 150 mm 2660.000 Cmt 1705.89

thick by providing coarse graded machine

crushed B.T. material satisfying MOST

specification of grading I (B.T. stone aggregate

% and 2.36 mm below - 20 % )including

spreading in uniform layer with motor grader on

prepared surface, mixing by mix in place method

with rotavator at OMC and compacting with

vibratory roller to achieve the desired density

148 Steel work, welded in built up sections framed 18000.000 Kg 84.13

work including cutting, hoisting, fixing in

position and applying a priming coat of read lead

paint & two coat oil paint. (A)In beams and

joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like..

149 Providing and fixing of Ridge flashing for roof 632.000 Smt 858.67

panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet

and polyester top coat 15-18 micron. The PPGI

Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c

along length of capping/flashing etc complete .

150 Providing and fixing pre-cast Rubber Dye / steel 3030.000 Smt 686.90

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc.

151 Providing and fixing pre-cast concrete kerb stone 3452.000 Rmt 361.64

of gray cement based concrete block 30cm

ength,30cm height and 15cm thick of M250

grade concret as per approved design and

including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

152 Box cutting the road surface to proper slope and 8217.000 Cmt 102.93

camber for making a base for road work

including removing the excavated stuff and

depositing on the road side slope as directed

upto upto All lift and lead..

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

153 Providing, laying and compacting natural sand & 1167.000 Cmt 383.80

gravel[ C.B.R. not less than 20%] below sub base

course including carriage of materials spreading

in uniform layer manually on prepared base and

compacted with vibratory roller to achieve

desired density including all materials, labour

154 Compaction and finishing of cement concrete 11670.000 Smt 67.67

road by Trimix (Vacuum Dewatering) process,

including deployment of additional labour, use of

vacuum dewatering pump, screed vibrator,

floater, and surface vibrators. The work shall

include removal of excess water, densification of

concrete, surface leveling, and finishing to

required camber and line. Further, forming of

grooves (transverse/longitudinal) and providing

rough/non-skid finish to the surface, complete

in all respects as per specifications and

directions of Engineer-in-charge.

155 Demolition including stacking of serviceable 66.000 Cmt 1057.85

materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work

156 Demolition of Brick work and stone masonry 389.000 Cmt 550.40

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

157 Filling foundation and plinth with murrum or 2524.000 Cmt 289.06

selected soil in layer of 20 cm in thickness

including ramming watering and consolidating

158 Constructing providing and fabricating cattle 11.000 Smt 4930.82

guard using channel section frame of size ISMC

series 100 mm x 50 mm (Weight 9.20 kg/Rmt)

and ISMC section 100 mm x 75mm (weight

11.50 kg/Rmt) intermediate support for welding

G.I.pipe at 12 Cm C/C of size 50 mm in a frame

made of Channel section size 100 mm x 50 mm

all round including fixing the unit on prepared

chamber of masonary wall using MS hold fast

embeded in masonary wall top as directed by

Engineer in charge and as per drawing and

necessary required arrangement etc complete.

159 Providing and fixing decorative entrance gate 1733.000 Kg 161.60

made out of cast iron and various mild steel

tabular section combination , the Ornamental

entrance gate should be fixed at compound wall

including pattern and die making , cutting

welding , grinding, fabrication , fixing in position

at compound wall with necessary pedestal,

bearing block and other locking arrangement.

The entrance gate should be painted with two

coats of priming coat of paint, and two coat of oil

paint etc complete. As per detail design and

instruction of architect.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

160 Providing and fixing concertina coil fencing with 1600.000 Rmt 1215.03

punched tape concertina coil 600 mm dia 10 mt

openable length having 50 no rounds per 6 mt

length, upto 3mt height of wall with existing

angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge.

placed 2.4mt or 3.00mt apart and with

horizontal R.B.T. reinforced barbed wire(3 mm)

stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or

G.I.barbed wire tied to angle iron, all complete

as per direction of Engineer-in-charge, with

reinforced barbed tape (R.B.T.)/Spring core (2.5

mm thick) and weight 43.478 gm/meter at

compound wall for ESR M4/ intakewell.

161 Supply, installation, testing & commissioning of 1.000 No. 238860.96

ISI approved electrical motor operated Kirloskar

make fire hydrant main pump set horizontal

end suction back pull out top discharge

centrifugal fire pump set with all the standard

acessories, base frame, coupling, and foundation

bolts with following specifications

Model -DB 80/26, Flow-137 m3/hr,

Motor Rating -45KW/60HP/3 ph

Suc x Del - 100 x

162 Supplying, installing, testing and commissioning 1.000 No. 504743.46

of Kirloskar make diesel engine driven fire

hydrant pump set, suitable for automatic

operation and consisting of horizontal type

centrifugal end suction back pull-out, top

discharge pump with cast iron body and bronze

impeller, mounted on M.S. fabricated common

base plate with coupling, coupling guard,

foundation bolts and all necessary accessories,

complete as required. The pump shall be of

Model KFE, having a discharge capacity of

m³/hr at 70 meters head, driven by a 62 HP

diesel engine, 3 phase, with suction and delivery

size of 125 mm x 100 mm.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

163 Fire Hydrant Panel suitable for 10 HP Jockey 1.000 No. 164125.00

Pump, 60 HP (137 m³/hr @ 70 m head) Main

Electrical Pump and 62 HP (137 m³/hr @ 70 m

head) Diesel Engine Operated Pump, consisting

of Incomer with MCCB (1 No.), R Y B Indication

(1 Set) and VAF Digital Meter (1 Set); Outgoing

with F1 – 60 HP Star Delta Starter for Main

Pump, F2 – 10 HP DOL Starter for Jockey Pump,

F3 – Auto On/Off Diesel Pump with Battery

Charger, Control Circuit with Auto/Manual

On/Off, On/Off Trip Indication and On/Off Push

Button; Fabrication duly powder coated in PO

Red Colour, fabricated from 14/16 SWG GI

Sheet with IP-42 Protection, fixed type floor

mounted with bottom cable entry, complete as

164 Supply. installation, testing & commissioning of 1.000 No. 120073.85

ISI approved electrical motor driven jockey

pump set having 10.8 m3/hr. @ 70m head. The

pump unit shall be a horizontally direct

mounted motor. Unit shall comprise the

following minimum requirements: a) Pump, b)

Electric motor IE2, c) Foundation bolts, d)

Mating flanges with gasket and fasteners, e)

Discharge gauges, etc. complete in all respect,

165 Supply, installation, testing & commissioning of 1.000 No. 29441.40

Priming tank, HDPE type, 1000 litres, with

necessary piping 100 mm size, G.I pipe for

priming the pumps, pipe of with butterfly valves

for isolation, Water Filling to priming tank by

piping min. 50 mm size, with all complete.

166 Providing and fixing approved make Perforated C 20.000 Rmt 380.77

type cable tray. Made from pre- galvanized

sheet steel. The cable tray should be bended as

per IS 2062/1079 . with max 17.5% perforation

with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge..(3) 150 X 50 X

167 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 40.000 Rmt 144.43

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size. (E) 3 core

2.5 Sq. mm for pressure switch

168 Providing and erecting XLPE(IS:7098)(I)-88 ISI 50.000 Rmt 275.73

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

169 Providing and erecting XLPE(IS:7098)(I)-88 ISI 65.000 Rmt 538.33

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm

(Only Fire Panel to Fire Pump)

170 Providing and erecting XLPE(IS:7098)(I)-88 ISI 150.000 Rmt 229.78

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable for

Diesel Engine Battery Charger (A) 3 core 2.5Sq.

171 Providing and fixing ISI marked CI D/F sluice 4.000 No. 8600.15

valves as per IS 14846 (lattest edition) of

following class and diameter including all taxes,

insurance, transportation, feight charges, octroi,

inspection charges, loading, unloading,

conveyance to the department store or site etc.

complete. (150 mm dia)

172 Providing and fixing 150mm diameter Non 8.000 No. 12407.85

return valve with gunmetal working parts as per

173 Providing and fixing ISI marked CI D/F sluice 4.000 No. 5238.87

valves as per IS 14846 (lattest edition) of

following class and diameter including all taxes,

insurance, transportation, feight charges, octroi,

inspection charges, loading, unloading,

conveyance to the department store or site etc.

complete. (100 mm dia)

174 Providing and fixing 100mm diameter Non 8.000 No. 8961.23

return valve with gunmetal working parts as per

175 Providing and fixing 63mm Gun metal / SS 20.000 No. 8928.40

single outlet type hydrant valve as per IS

with ISI marked 75 mm inlet and 63mm female

instantaneous coupling rubber washer and cast

iron hand wheel operation with close and open

direction as directed.

176 Providing and fixing 63mm dia Gun metal /SS 20.000 No. 4464.20

branch pipe of standard length with 20mm bore

hexagonal No.zzle as per IS 903 with ISI marked

177 Providing and fixing 63mm Parole fire hose of 20.000 No. 9847.50

approved grand conforming to IS 636 type B

having crushing pressure of 37.20 kg/cm 2 of

ISI marked of 15 mtr length fitting with

necessary S.S 63mm delivery hose coupling as

IS 903 with ISI mark bided with GI wire etc

complete directed.

178 Mild steel box hose cabinet of 18SWG of suitable 20.000 No. 4090.00

size with looking arrangement and 3mm thick

glass panel to accommodate 1 No.s of hose pipe

(15mtr) and 1 No.. GM / SS branch pipe etc

painting red colors etc as directed.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

179 Providing and fixing first aid hose reel wall 24.000 No. 11423.10

mounting fix type having side of the hose reel

made of MS providing with 30mtr long thousand

six length 25mm dia PVC nylon braided flexible

hose with S.S shut off No.zzle of approved

quality etc complete as directed.

180 supplying and installing and conmissing of CI 4.000 No. 33427.97

flanged Y type Strainer with SS mesh suitable

flanges, nuts, bolts, gasskets, etc complete. For

200 mm pipe suction inlet

181 Providing dry chemical powder type fire 42.000 No. 3479.45

extinguishers of 5 kg/Capacity with ISI mark (IS

2171) etc as directed.

182 Providing carbon dioxide type fire ext 4.5KG 42.000 No. 6761.95

capacity with ISI mark

183 Wrapping and coating of 150 mm / 100mm MS 740.000 Rmt 275.73

pipe as per direction of engineer incharge for

protection of MS pipe from the corrosion.

184 Design, supply & installation of safety signage 48.000 Smt 3085.55

made of zinc base glow in the dark rigid sheet

with high lumiNo.us with pasted on 3 mm thick

on rigid PVC foam sheet. Such as EXIT

EMERGENCY EXIT. Do No.t use lift etc.

185 supplying and installing Pressure gauge for 10.000 No. 4502.68

Entire System with required fittings including

pressure switch. as per direction of engineer

186 Supply installing Testing & Commissioning of 2.000 No. 36764.00

Fire Alram System with Manual Call Point at

eache floor (G+3) with Hotter and Panel System

Set at ground floor including cost of all wiring.

187 Providing and fixing 65mm diameter Non return 32.000 No. 7146.13

valve with required acessoriesfor UGWT Pump

connection with all required aceessories,

solutions etc. complete

188 Prviding and fixing quartzoind bulbty pe ss 1480.000 No.. 592.37

sprinkler head suitable sustaining pessure on

seat and water hamer effect. The type and

temperature rating shall be as follows

(a) 57 degree sprinkler

189 Providing and fixing 100mm diameter wefer 8.000 No.. 3798.11

plate Non return valve with CI Body and SS

Plate working parts as per IS including.

190 Providing and fixing in postion 25 mm ball valve 10.000 No.. 673.67

to be fixed in Hose Real

191 Providing and fixing 80mm diameter Non return 4.000 No.. 5795.89

valve with CI Body and SS Plate working parts

as per IS including.

192 Supply, installation and testing and 4.000 No.. 13566.32

commissioning of SS - 4 way Fire Brigade in let

connection with 63 mm instantaneous coupling

with isolation valve, plug, cap, chain complete in

all respect etc. complete

193 Providing and fixing Hose Clamp to be fixed in 24.000 No.. 145.19

Hose Real connection etc. complete

194 Providing and fixing Hose Coller to be fixed in 24.000 No.. 580.75

Hose Real connection etc. complete

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

195 Providing MS air cushion tank on top of each 1.000 No.. 46576.15

riser fabricated from 6mm thick MS plate,

mm in diameter and 1.5 m in height with dished

ends fabricated from 8mm thick MS plate with

Air release valve with stop cock, flanged inlet

connection and drain arrangement with 25mm

dia valve, pressure gauge with gun metal stop

cock complete with all accessories as required

and conforming to IS 4736-1968. (The cushion

tank should be suitable for rated working

196 Fixing, testing & commissioning of MS air 1.000 No.. 3554.19

cushion tank on top of each riser fabricated from

6mm thick MS plate, 300 mm in diameter and

1.5 m in height with dished ends fabricated from

8mm thick MS plate with Air release valve

with stop cock, flanged inlet connection and

drain arrangement with 25mm dia valve,

pressure gauge with gun metal stop cock

complete with all accessories as required and

conforming to IS 4736-1968.

197 Providing Foot Valve of of 4" diameter approved 4.000 No.. 22962.86

make including all required accessories etc.

198 Installing, testing and comissioning 4" Foot 4.000 No.. 714.32

Valve including all required accessories etc.

199 Providing Foot Valve of of 6" diameter approved 8.000 No.. 32754.30

make including all required accessories etc.

200 Installing, testing and comissioning 6" Foot 8.000 No.. 789.82

Valve including all required accessories etc.

201 P & Fixing GI Air Release Valve 25 mm set 8.000 No.. 3647.11

including all required accessories etc. complete

202 Supply , installation , testing & commissioning 2.000 No.. 5765.69

of SS 304 25 mm Pressure Safety / Relief

Valve Range 0 - 12 Kg. / Cm2 including

pressure switch. complete with all accessories

203 Supply, fabrication & erection of aboveground 20.000 R.mt 3879.41

G.I. 'C'-Class, ERW piping, conforming to

IS:3589, for size 200 mm dia. & above,

thickness. G.I. pipe fitting's as per IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

204 Supply, fabrication & erection of aboveground 460.000 R.mt 2779.47

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 150mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 150mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

205 Supply, fabrication & erection of aboveground 280.000 R.mt 2479.80

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 100mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 100 mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

206 Supply, fabrication & erection of aboveground 185.000 R.mt 1829.36

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 80mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 80 mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

207 Supply, fabrication & erection of aboveground 40.000 R.mt 1678.37

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 65mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 65 mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

208 Supply, fabrication & erection of aboveground 2240.000 R.mt 1231.19

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 50mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 50 mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

209 Supply, fabrication & erection of aboveground 1600.000 R.mt 598.17

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 25mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 25 mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and

two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

210 Supply, installation and testing and 8.000 No. 5122.22

commissioning of SS - one way Fire Brigade in

let connection with 63 mm instantaneous

coupling with isolation valve, plug, cap, chain

complete in all respect etc. complete

211 5 kg Moduler Fire Extinguisher (Gr. Floor 16.000 No. 3348.30

Electrical Room) including all required

accessories etc. complete

212 Supply, Installation and commissioning of 120.000 No 1271.49

smoke detectors / heat detectors including

plung in base, with complete accessories.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

213 Supply, Installation and commissioning of Audio 120.000 No 1329.57

hooters including Pluge in base, with complete

214 Pay Legal Fees to Concern Authority for 15130.000 Smt 15.15

Obtaining Plan Approval and Final NOC

215 Providing and laying cement concrete 1:3:6 (1- 10.000 Cum. 3005.76

Cement : 3- coarse sand : 6- Crushed stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

216 Providing and laying cement concrete 1:3:6 (1- 8.000 Cum. 4046.21

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall

217 Supplying of well rotted FYM manure with all 108.000 Cum. 984.75

lead and Lift including spreading mixing

dressing and rolling with hand roller etc.

218 Scarifying the surface of Soil including spreading 2400.000 Sqm 47.47

of DAP fertilizer mixing with Soil properly

levelling gand dressing of the plot

219 Supplying and planting Dibbing semi carpet 2400.000 Sqm 164.63

lawn at distance of abour 15 cm x 15 cm after

proper anti termite teratment amd rolling the

seme by hand roller amd wetering etc complete.

220 Bowing and developing flowering plants grown in 100.000 No. 328.25

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith of soil packed in polithyline bag or

Earthern pot. Including organic & chemical

fertilizer Pesticides, fungicides, hormones &

maintaining the plants up to three months as

deserted. Bottol palm.

221 Bowing and developing flowering plants grown in 50.000 No. 590.85

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining

the plants uo to three months as deserted

222 Bowing and developing flowering plants grown in 100.000 No. 157.56

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining

the plants uo to three months as Jasud

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

223 Bowing and developing flowering plants grown in 100.000 No. 217.15

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining

the plants uo to three months as Croton

224 Bowing and developing flowering plants grown in 200.000 No. 196.95

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining

the plants uo to three months as deserted green

225 Bowing and developing flowering plants grown in 200.000 No. 157.56

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer

pesticides, fungicides hormones & maintaining

the plants uo to three months as deserted New

226 Labour charges for planting various plantsafter 750.000 No. 105.04

proper anti termite treatment in pits including

placing property and filling the pit with requred

prepared mix soil and wetering and dispporting

227 Maintance of the garder for 60 days after 1.000 Job. 104535.00

Complition of 3 month stipulated period is

completed for plantation o lawn and plants

including applying second round of proper

antitermite tretment.

228 Providing and fixing brass screw down stop 8.000 No. 205.83

tap.(A)15mm dia.

229 Providing and fixing 15 mm dia, 15 m long 4.000 No. 1654.38

braided PVC flexible hose pipe of approved make

with connectors and clamps, including 15 mm

dia G.I. nipple, jointing, fixing, testing, and

commissioning, complete in all respects as

Total Civil Amount A =

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

230 Point wiring for Light / Bell with 2-1.5 sq.mm 2557.000 Pt 485.81

& earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLSH PVC insulated

multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete.Cat-III

231 Point wiring for Individual Plug with & earth 52.000 Pt 510.05

wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling

as per pipe erected with following type of

accessories.[I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium

class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat.III

232 Point wiring for Individual Plug with & earth 103.000 Pt 745.38

wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling

as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat.III

233 Point wiring for on board Looped Plug with 6A 291.000 Pt 257.55

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules erected on

/ in wall / ceiling with following type

accessories.Cat-III

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

234 Providing following type of Modular Type 72.000 Ea 160.59

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket[A] For One

235 Providing following type of Modular Type 300.000 Ea 25.25

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(7) Blank Plate Single Cat.III

236 Providing following type of Modular Type 128.000 Ea 160.59

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

237 Providing and erecting ISI mark Medium class 3500.000 Mtr. 33.33

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

238 Providing and erecting ISI mark Medium class 150.000 Mtr. 54.54

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

239 Providing & erecting PVC Corrugated Flexible 200.000 Mtr. 21.21

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

240 Providing & erecting PVC Corrugated Flexible 50.000 Mtr. 27.27

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

241 Supplying under floor pregalvanised corrosion 250.000 Mtr. 1224.12

proof rectangular sheet steel cable trunking of

1.6 mm thick having with stand point load up to

1.33 Ton & free from seepage of concrete of

screed water with all accessories,Junction

Box,Joints as required and demanded by

engineer-incharge and laying/erecting as per

OEM guidelines and as per instruction of

engineer incharge having following size of

dimensions and No of compartments (W x D x T)

[6] 300mm x 25mm x 1.6 mm with Three

242 Providing and erecting Mains with 1.1 KV grade 16260.000 Mtr. 82.82

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

FRLSH PVC insulated stranded wire of green

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

243 Providing and erecting Mains with 1.1 KV grade 1195.000 Mtr. 112.11

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLSH PVC insulated

stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

244 Providing and erecting Mains with 1.1 KV grade 120.000 Mtr. 147.46

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLSH PVC insulated

stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

245 Providing and erecting Mains with 1.1 KV grade 900.000 Mtr. 425.21

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLSH PVC insulated

stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

246 providing and erecting Mains with ISI marked, 400.000 Mtr. 300.98

1.5KV FRLSH grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts

(i) One wire 35.00 sq. mm

247 providing and erecting Mains with ISI marked, 280.000 Mtr. 669.63

1.5KV FRLSH grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts

(k) One wire 70.00 sq. mm

248 Supplying and erecting Flexible FRLSH PVC 160.000 Mtr. 46.46

insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to be

erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed

249 Supplying & erecting approved make Telephone 800.000 Mtr. 20.20

Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with

FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe.

of following size of conductors & nos.of pairs.

With necessary connections. [A] Conductor Size

0.5 mm (a) Unarmoured`(2) Two Pairs

250 Supplying & erecting approved make Telephone 150.000 Mtr. 199.98

Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with

FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe.

of following size of conductors & nos.of pairs.

With necessary connections.

(b) Armoured [Jelly Filled](2) Twenty Pairs

251 Supplying & erecting approved make LAN cable 4160.000 Mtr. 47.47

of following size in existing pipe as per

direction[C] CAT -

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

252 Providing & erecting Switch board for 128.000 Ea 1133.22

Computer or electric apparatus consisting of

following modular type accessories mounted

with PVC / Metallic concealed/open box with

single mounting base frame covered with

textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories.Cat-III

253 Decorative call bell Ting-tong box type 250 volts 19.000 Ea 71.71

complete erected

254 Supplying and erecting LED indoor fittings with 909.000 Ea 373.70

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral/ non-integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat III

255 Supplying and erecting led lamps with following 58.000 Ea 112.11

wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5(A) LED Lamps integral type,

with PC diffuser suitable LAMP holder

(i) 5 to 8 watts Cat-III

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

256 Supplying and erecting LED indoor fittings with 270.000 Ea 427.23

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-III

257 Supplying and erecting LED indoor fittings with 188.000 Ea 1794.77

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane

front frame with translucent cover fixed to

housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV cat III

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

258 Supplying and erecting LED street light / Flood 30.000 Ea 4997.48

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii)(ii) above

48 to 60 Watts. Cat-III

259 Supplying and erecting LED street light / Flood 2.000 Ea 4819.72

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of

finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate,

pipe arrangement for vertical mounting driver

and accessories wired upto terminal block.IP

(ii)32-40W Cat-III

260 Providing and erecting Approved make Four pole 9.000 Ea 6173.12

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

261 Providing and erecting Approved make Four pole 12.000 Ea 8055.76

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

262 Providing and erecting Approved make Four pole 2.000 Ea 16221.61

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

ICS=100% of ICU only Cat III

263 Providing and erecting Approved make Four pole 12.000 Ea 20946.39

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with

variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

264 providing and erecting Approved make standard 3.000 Ea 54789.47

manually operated fixed type 3 Pole Air circuit

breaker. Having 50 kA breaking capacity

,Vsr=690 v, Ui=1kv ,impulse voltage=12 kv with

ICU=ICS=ICW (1 sec), with following type of relay

and accessories.

(2) with microprocessor Release with over load,

short circuit, earth fault protection (L.S.I.G.) and

metering display in modular design with LED

display and Test Trip button facility, CTs and

auxiliary contacts, of following current ratings

(a) 630Amp Cat III

265 Providing and erecting Approved make Earth 6.000 Ea 4687.41

fault Relay suitable to mount with inter

connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V

AC. with all internal connections & complete

erected in existing M.S.housing.

266 Providing and erecting Approved make Earth 3.000 Ea 4983.34

fault Relay suitable to mount with inter

connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V

AC. with all internal connections & complete

erected in existing M.S.housing.

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

267 Providing and erecting Approved make Earth 1.000 Ea 5415.62

fault Relay suitable to mount with inter

connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V

AC. with all internal connections & complete

erected in existing M.S.housing.

268 Providing and erecting following additional parts 35.000 Ea 873.65

for panel mounting MCCBs

(A)Extended operating rotary handle with pad

lock with three position trip,off,on suitable for

25A to 250 A panel mounting cat-III

269 Supplying and erecting triple pole & neutral 12.000 Rn.Mtr 1961.42

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

(A) Suitable for 100 Amp. Capacity

270 Supplying and erecting triple pole & neutral 23.000 Rn.Mtr 4909.61

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(C) Suitable for 300 Amp. capacity

271 Supplying and erecting triple pole & neutral 6.000 Rn.Mtr 10559.55

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

(E) Suitable for 630 Amp. capacity

272 providing and erecting Miniature circuit breaker 690.000 Ea 112.11

single pole 6A to 25A suitable to operate on

V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

273 Providing & erecting 240 V MCB double pole 1.000 Ea 278.76

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity

(B) 6 to 32 Amp. Cat-III

274 Providing & erecting 415V MCB Four Pole 2.000 Ea 578.73

Switch for Lighting Load (B curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity

(a) 6 to 32 Amp. Cat III

275 Providing & erecting 415 V MCB Four Pole for 81.000 Ea 737.30

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity

(B.) for 63 Amp. Cat-III

276 Providing and erecting Sheet Steel powder 3.000 Ea 885.77

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used)

(A) single phase incoming and horizontal single

(b) sheet steel double door (IP-43)

277 Providing and erecting Sheet Steel powder 36.000 Ea 3412.79

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used)

(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation

(b) sheet steel double door

278 providing and erecting Approved make RCCBs 129.000 Ea 1969.50

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on single phase

240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do

not incorporate any electronic component. for

following Max. rating erected as directed

(i) 25 Amps.DP cat III

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

279 Providing and erecting Approved make RCCBs 3.000 Ea 4314.72

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on 3 phase and

neutral 415V,50Hz. having characteristic of

quick action & tripping with all advance feature

& do not incorporate any electronic component

for following Max. rating erected as directed.

with necessay enclosure

(iv) 100 Amps. FP (100 mA Sensitivity) Cat-III

280 Providing and erecting required size Copper strip 60.000 Kg. 794.87

for earthing of H.T. OCB / ACB/ Transformer,

LT panel board, Motors etc. using copper clamp.

281 Providing and erecting Annealed bare Copper 60.000 Kg. 794.87

wire 8 to 16 SWG.

282 Supplying & erecting earth pit of minimum bore 15.000 Ea 4591.46

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency

and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate)

& having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain

moisture for long time Necessary test report

must be submitted by Agency.

(a) For Electrical Installation up to 440V in

Item Description of Item (with brief specification Total

Quantity Unit Rate in Figures

No. and reference to book of specifications) Amount

283 Supplying & erecting earth pit of minimum bore 2.000 Ea 8636.51

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test

certificate including value of earth resistance of