REPAIR / MAINT OF WOODEN FURNITURE ITEMS AT AF STN GANDHINAGAR

Amount

BED PLYWOOD TOP (Drawing No. FD-246)

Removing of old unserviceable back rest of bed and replacement of new back rest as per existing size and shape of IInd class hard wood including polishing (two or more coats) over a coat of wood filler after preparation of surface.

Removing of old unserviceable foot rest of bed & replacement of foot rest made as per existing size and shape or as per Drg IInd class hard wood including polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked all as shown in Drg.

Removing of old wooden stiffener and replacement of new wooden stiffner of IInd class Hard wood stiffener of size 50x60mm suitable for bed complete all as shown in Drg including polishing two or more coats of wood filler after preparation of surface etc.

Taking out old unsv long rail of bed plywood and replacement of new long rail of IInd class hard wood of existing shape and size complete all as specified and shown in drg including polishing two or more coats over a coat of wood filler after preparation of surface etc.

REPAIR TO TEAPOY VARANDAH (Drawing No. FD-255) :-Taking down old U/S top of teapoy varandah and replacement of new top of teapoy varandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

REPAIR TO PEG TABLE (Drawing No. FD-227)

Removing unserviceable top of Peg table but repalcement of new top of 18/19mm thick particle board BWR type Gde-I as per Drg ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.

Removing unserviceable/broken leg of peg table and repalcement of new leg made of IInd class hard wood all as per Drg or existing pattern and polishing with french polish (Two or more coats) over a coat of wood filler after preparation of surface etc.

Taking out old unserviceable/broken long rail of frame and replacement of new long rail of IInd class hard wood planned & finishing smooth of existing shape and size complete all as specified and directed.

Description all as per Item No 3.03 above but short rail

TABLE DINING 1200 mm x 900 mm (Drawing No. FD/MAP-II/05) : Removing the following unserviseable components of Table dinning 1200 mm x 900 mm and replacing the same with new one IInd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing :-

Top of size 1200 mm x 900 mm made of 18/19 mm thick pre laminated particle board of approved shade including 4 mm thick teakwood edging alround.

Leg made of IInd class hardwood of size and shape as per drg.

Short rail of size and shape as per drg.

Long rail of size and shape as per drg.

REPAIR TO TABLE DINING 6 PERS (Drawing No. FD-273/376)

Taking out old unsv top from table dining 6 pers and replacement of new top of 18/19 mm thick pre laminated particle board exterior grade and provided teak wood beading 4 mm thick around fixed with suitable size 4 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and complete all as directed.

Taking out old unsv leg from table dining 6 pers and repalcement of new leg of II nd Class hard wood complete all as shown on drg and directed by EIC.

Taking out old unsv long rail from table dining 6 pers and replacement of new long rail of II nd class hard wood complete all as shown on drg and directed by EIC.

Taking out old unsv short rail from table dining 6/8 pers and replacement of new short rail of II nd class hard wood complete all as shown on drg and directed by EIC.

REPAIR TO TABLE DINING 8 PERS (Drawing No. FD-273/376)

Taking out old unsv top from table dining 8 pers and replacement of new top of 18/19 mm thick exterior grade and provided teak wood beading 4 mm thick around fixed with suitable size 4 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same complete all as specified and shown in drg and complete all as directed.

(b) Taking out old unsv long rail from table dining 8 pers and replacement of new long rail of II nd class hard wood complete all as shown on drg and directed by EIC.

CHAIR DINNING OFFER'S (Drawing No. FD/E6/MAP-II/04) : Removing the following unserviseable components of chair Dinning offer's and replacing the same with new one IInd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing : -

Repair and replacement of front leg (left or right ) made out with IInd class Hard Wood size and shape as per existing chair or as per Drg complete all as directed by Engineer-in-Charge.

All as per item No 7.01 above here in before but Rear leg (left or right ) complete all as directed by EIC.

All as per item No 7.01 above here in before but Side Rail .

All as per item No 7.01 above here in before but front Rail.

All as per item No 7.01 above here in before but Bottom stiffner.

All as per item No 7.01 above here in before but Back Rest vertical strip.

Replacement of unserviceable cushioned with seat and new seat top of chair dining with 75 mm thick 32 density foam covered with tapestry cloth not less than Rs 250 /- per metre as approved on seat of 12 mm commercial plywood BWP grade including tightening of frame work as shown on drg.

Replacement of unserviceable pvc shoes of chair dining with new one with screw of superior quality all as shown on drg.

Replacement of old tapestry cloth with new tapestry cloth of superior quality (cloth not less than Rs 250/- per metre) and fixing appropriatly as shown on drg.

REPAIRING TO CHAIR EASY (Drawing No. FD-229) : Removing the following unserviseable components of chair Easy and replacing the same with new one II nd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing and as directed by EIC :-

Repair and Replacement of front leg (left or right ) made out with IInd class Hard Wood of size and shape as per existing Chair.

All as per item No 8.01 above here in before but Rear leg (left and right).

All as per item No 8.01 above here in before Arms rest.

All as per item No 8.01 above here in before front/rear rail for seat.

All as per item No 8.01 above here in before side rail for back.

Description all as per item 8 here in before but replacement of shoes with new PVC shoe of superior quality with steel screw of suitable size complete.

Re-canning of chair easy

REPAIR TO CHAIR WRITING (Drawing No. FD-280) : Removing the following unserviseable components of chair Writting and replacing the same with new one II nd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing and as directed by EIC :-

Repair and Replacement of front leg (left or right ) made out with IInd class Hard Wood size and shape as per existing chair.

All as per item No 9.01 above here in before but rear leg (left or right) .

All as per item No 9.01 above here in before but back stiffener.

All as per item No 9.01 above here in before but bottom stiffener.

Repair and Replacement of Arm rest made out with IInd class Hard Wood of size and shape as per existing chair.

Description all as per item 9 here in before but replacement of shoes with new PVC shoe of superior quality with steel screw of suitable size complete.

Re canning of chair writing

REPAIR TO CHAIR DINNING (Drawing No. FD-228/279) : Removing the following unserviseable components of chair Dinning and replacing the same with new one II nd class Hardwood free from cracks and knots including tightening of the frame work as shown as per drawing and as directed by EIC :-

(a) Repair and Replacement of front leg (left or right ) made out with IInd class Hard Wood of size and shape as per existing chair.

(b) All as per item No 10.01 above here in before but rear leg (left or right).

(c ) All as per item No 10.01 above here in before but Front/Rear/Side rail.

(d ) All as per item No 10.01 above here in before but back stiffener of Chair Dinning

(e) Description all as per item 10 here in before but replacement of PVC shoes with new PVC shoe of superior quality with steel screw of suitable size complete.

(f) Re-canning of chair dining.

(g) Description all as per item 10 here in before but replacement of PVC Seat with New PVC Seat of superior quaility with steel screw suitable size of chair dinning.

REPAIR TO SOFA SET 5 SEATER (Drawing No. FD-281)

Removing of existing U/S cushion from sofa set five seater and S&F new foam cushion 95 to 100 mm thick 40 density duly covered with superior quality tapestry cloth (Tapestry cloth not less than Rs. 250/Per Mtr) as directed by Engr-in-Charge. (29 Nos of set x 10 Nos Cushion i.e 290 Nos Cushion & cover duly stitched) Make-Sleepwell or equivalent as approved by GE.

Removing of existing old tapestry cover from cushion 210x220 mm 4" thick and S&F new tepestry cover duly stitched (Tapestry cloth Not less than Rs. 260/Per Mtr) as directed by Engr-in-Charge. (25 x 10 Nos cover i.e. 250 covers)

Removing of existing U/S front/rear rail wooden of sofa set 5 seater and S&F new Front/Rear wooden rail made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.

Removing of existing U/S stiffner/bearer wooden and S&F new stiffner/bearer wooden made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.

Removing of existing U/S Arm rest wooden and S&F new Arm rest wooden made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge.

REPAIR TO TABLE 900 X 900 X 760MM (Drawing No. FD-291)

Removing of old unserviceable table top and provision of new table top made of prelaminated particle board 18/19mm thick BWR, interior grade including 4 mm thick teak wood beading all round the table top as specified and shown on drawing and as directed by Engr-in-charge.

Removing of old unserviceable leg and replacement of new leg of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge.

Removing of old unserviceable rail and replacment of new rail of existing shape and size IInd class hard wood and fixing as shown in drawing and as directed by Engr-in-charge.

REPAIR TO TEAPOY WOODEN (Drawing No. FD-232/278)

Removing unserviceable top of teapoy and Replacement new top of 18/19mm thick particle board BWR type Gde-I as per Drg ISI Marked and polishing with French polish (two or more coats) over a coat of wood filler etc.

Removing unserviceable/broken stiffener/long rail of teapoy repalcement with new stiffener/long rail made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.

Removing unserviceable side rail of teapoy replacement with new side rail made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.

Removing unserviceable leg of teapoy replacement with new leg made of IInd class hard wood all as per Drg or existing pattern polishing with french polish (two or more coats) over a coat of wood filler after preparation of surface etc.

REPAIR TO TABLE CENTRE (Drawing No. FD-235/274/375)

Taking down old U/S top of table centre and replacement of new top of table centre made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

Removing of old unserviceable long rail of Table Centre & replacement of new long rail made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable Short Rail of Table Centre & replacement of new short Rail made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

Removing of old unserviceable leg of Table Centre & replacement of new leg made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

TABLE WRITING (Drawing No. FD-275)

Removing old unserviceable top and replacement of new top made of particle board 18/19mm thick commercial BWR Gde I of the size and shape as per Drg ISI Marked with IInd class HW teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc.

Removing of old unserviceable back ply of table writing and replacement of new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified and shown on drawing .

Removing old unserviceable leg of tables & Replacement with new leg made out with IInd class hard wood all as per Drg or of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc.

REPAIR TO SIDE BOARD (Drawing No. FD-241/FD-371)

Removing of old unserviceable/broken existing back of side board and replacement of new back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing.

S&F in repair magnatic catch spring for shutter.

Removing of old unserviceable/broken bottom of side board and replacment of new side board of 18/19mm thick particle board BWR interior grade as per existing shape and size including 1mm thick sunmica sheet to external surface of particle board of side board complete all as specified and shown in drawing & ISI Marked.

Removing of old unserviceable/broken shelf of side board and replacement new shelf of IInd class hard wood existing shape and size duly planned and smooth complete all as specified and shown on drawing and as directed by Engr-in-charge.

Removing of old unserviceable/broken top but replacemet new top of 18/19mm thick particle board as per existing shape and size including 1 mm thick sunmica sheet to external surface of particle board complete all as specified and shown on drawing and as directed by Engr-in-charge.

Removing of old unserviceable/broken existing drawer of side board and replacement of new drawer of IInd class hard wood of existing shape and size ( 7 inch x 15 inch x 0.5 inch) duly planned and smooth complete all as specified and shown in drawing.

REPAIR TO TV TROLLEY (Drawing No. FD/E6/MAP/04) : Removing the following unserviseable components of TV Trolley and replacing the same with new one pre-laminated partical board duly finished of size and shape as shown as per drg and as directed by Engr-in-charge:-

Top of size 750 mm x 600 mm made of 18/19 mm thick pre-laminated partical board of approved shade including 4 mm thick teakwood edging alround.

Sides of size 500 mm x 682 mm made of 18/19 mm thick prelaminated partical board of approved shade (Interior grade).

Back of size 500 mm x 682 mm made of 18/19 mm thick prelaminated partical board of approved shade.

Shutter of size as per existing drg made of 5 mm thick glass shutter openable with magnetic catcher.

Replacement of Caster 50 mm dia swivel type.

Table Bed Side (Drawing No. FD/E6/MAP/15) : Removing the following unserviseable components of Table bed side and replacing the same with new components as shown as per drawing and as directed by Engr-in-charge :-

Top of size 450 x 450 mm made of 18/19 mm thick pre laminated partical board of existing shade including 4 mm thick teakwood edging alround.

side of size 450 mm x 432 mm made of 18/19 mm thick pre laminated partical board of existing shade.

bottom of size 450 x 450 mm made of 06 mm ply wood of table bed side.

Back of size 500 x 450 mm made of 6 mm thick ply wood and 414 mm X 100 mm,18 mm thick prelaminated paticle board piece in between the frame as per drg.

Drawer of size 414 x 100 mm made of 18 mm thick partical board with 6 mm thick ply wood bottom as per drawing.

Handle of size 75 mm of superior quaility for table bed side.

Replacement of unserviceable telescopic channels with new telescopic channel and fixing as directed by Engr-in-charge..

REPAIR TO TABLE DRESSING GENTS (Drawing No. FD-230/379)

Dismantling taking out carefully and replacement of old existing broken top of table dressing gents of any description in any position & replacement of the same with replacement of new top of 01mm thick laminated sheet of approved shade over particle board 12mm thick and including 6mm thick teak wood beading all round made to shape fixed in position pasted with 01mm thick laminated sheet on top complete all as shown on drawing and specified and directed by the Engr-in-Charge.

All as per item No 19.01 here in before above but replacement of new side of 12 mm thick particle board, one side teak veneered and other side commercial exterior grade BWP with and including 6 mm thick teak wood beading all-round, made to shape fixed in position all as shown on drg, specified and directed by the Engr-in-charge.

All as per item No 19.01 here in before above but replacement of bottom with replacement of new 12 mm thick ply, teak veneered on one side and commercial on other side grade with (BWR Resin) made to shape fixed in position all as shown on drg specified and directed by the Engr-in-Charge complete material & labour.

All as per item No 19.01 here in before above but replacement of mirror with replacement of new mirror with teak wood frame 5.5mm thick mirror of Saint Gobain/Modiguard/Atul or euivalent as approved by GE complete all as shown on drawing and directed by Engr-in-Charge.

Description all as per item No 19.01 here-in-before but replacement of chromium plate knob 25 mm dia of best quality and as approved by Engr-in-Charge.

REPAIR TO TABLE DRESSING LADIES (Drawing No. FD-251)

Dismantling taking out carefully and replacement of old existing broken top of table dressing ladies of any description in any position & replacement of the same with replacement new top of 18/19 mm thick pre-laminated particle board exterior grade, BWR ISI marked, made to shape fixed in position with teak wood veneered on one side & other side commercial complete all as shown on drawing and specified and directed by the Engr-in-Charge.

All as per item No 20.01 here in before above but replacement of back plywood 6mm thick commercial ply all as specified and as directed by Engr in charge .Drg no FD 251/32

All as per item No 20.01 here in before above but replacement of unserviceable mirror 5.5 mm thick with S&F new 5mm thick mirror 365x1220x5mm thick with complete frame complete all as shown in drawing and directed by Engr in Charge.

All as per item No 20.01 here in before above but replacement of chromium plate knob 25mm dia of best quality and as approved by Engr in charge .

TABLE COMPUTER (Drawing No. FD/E6/MAP/03) : Removing the following unserviseable components of Table computer and replacement with new components duly finshed complete all as shown in drg and directed :-

Top of size 900 mm x 562 mm made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

Key board Tray of size 450 x 480 mm on telescopic channel made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

Mouse tray of size as per drg on telescopic channel made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

Drawer of size as per drg on telescopic channel made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

Shelf of size 450 mm x 300 mm made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

Shelf of size 230 mmx 300 mm vertical made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

Bottom of size 700 mm x 300 mm made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

Side of size 632 mm x 150 mm made of 18/19 mm thick prelaminated paricle board including 4 mm thick teakwood edging alround.

M&L preparation of old wooden surfaces and applying one or more coat of French polish of required shade complete all as directed for the following :-

Bed with ply wood top (Drawing No. FD-246)

Chair writing (Drawing No. FD-280)

Chair Easy (Drawing No. FD-229)

Chair dining (Drawing No. FD-228/279)

Table writing (Drawing No. FD-249/275)

Side Board (Drawing No. FD-241/371)

Table 900x900x760mm wooden (Drawing No. FD-293/289)

Table dressing gents with mirror (Drawing No. FD-230/379)

Table dressing ladies with mirror (Drawing No. FD-251)

Table centre with sunmica top (Drawing No. FD-235/375)

Table bed side (Drawing No. FD-276)

Sofa Set (5 Seater) (Drawing No. FD-281)

Sofa Chair Single seater (Drawing No. FD-281)

Teapoy / Teapoy FD (Drawing No. FD-232/278)

Table Peg (Drawing No. FD-227)

Table dining 6/8 Pers (Drawing No. FD-273/376)

PRAFUL ENTERPRISES

L.BHIMSEN

Navkar Enterprises

SNEH CORPORATION